Cambridge Sound Qt X 600 + 6x E-P-W-16-4 Kit – 2,400 SF Sound Masking, Paging & Music

Product Overview

This Cambridge Qt X 600 sound masking kit gives a multi-department office of up to about 2,400 sq ft a six-zone speech privacy system with paging and background music from one set of ceiling emitters. It pairs one Qt X 600 controller with six E-P-W-16-4 packs, for twenty-four white Qt Active Emitters with 16 ft patch cables. Direct-field emitters raise the background sound level just enough to make nearby conversations unintelligible, while the same emitters carry announcements and music. Actual coverage depends on ceiling height and layout, and the Qt X 600 scales to 72,000 sq ft as you add emitters.

What's Included

• 1 x Cambridge Sound Qt X 600 6-zone sound masking controller (911.0069.900)
• 6 x Cambridge Sound Qt E-P-W-16-4 Active Emitter 4-packs, white, each with 4 x 16 ft patch cables (911.0899.900) — 24 emitters total

Required, sold separately: Qt Active Emitters are powered through a Cambridge PS-AE-3 Active Emitter Power Supply and a PI-AE power injector installed next to the first emitter on each run.

Product Description

The Qt X 600 is a compact, networked sound masking controller with six controllable outputs, each with A and B cable runs, supporting up to 50 Qt Active Emitters per run. Each output can be set to its own masking level, paging and music level, and spectrum, so open work areas, private offices, conference rooms, and corridors can be tuned separately. Two analog inputs bring in a paging source and a background music player, and the AVB network port lets multiple Qt X controllers share audio in larger commercial sound masking installations. The Qt Active Emitters are direct-field ceiling emitters: the driver faces the room, so masking spreads evenly and paging stays intelligible. Each emitter produces 30 to 60 dBA of masking and up to 74 dBA of paging or music at 1 meter. Emitters daisy-chain over Category UTP cable with RJ-45 connectors, and rear switches trim level in 1.5 dB steps for fine tuning during commissioning.

Creation Networks offers three Qt Active Emitter kits built around the same emitter pack. Choose by coverage area and zoning:

*Coverage estimates assume roughly 100 sq ft per emitter; actual layout depends on ceiling height and type.

Key Features

• Sized for About 2,400 sq ft — Twenty-four active emitters cover a multi-department office floor with room to zone each area.
• Masking, Paging, and Music — One ceiling emitter network carries speech privacy masking, overhead paging, and background music.
• Six Independent Zones — Masking level, aux level, and spectrum are set per output so each area can be tuned on its own.
• Direct-Field Active Emitters — Room-facing drivers spread masking evenly and keep announcements clear.
• Expandable to 72,000 sq ft — Add E-P-W emitter packs on the same Qt X 600 as the facility grows.
• Networked Management — AVB networking lets multiple Qt X controllers share audio across larger deployments.
• Plenum-Rated Emitters — Emitters are ETL listed and evaluated to UL 2043 for installation in air handling spaces.
• Simple Cabling — Emitters daisy-chain over standard Category UTP cable with RJ-45 connectors.
• Five-Year Warranty — Both the Qt X 600 and the Qt Active Emitters are covered by Biamp's five-year warranty.

Typical Applications

• Commercial meeting space
• Conference room
• Huddle room
• Government space
• Training room
• Multi-purpose room

Technical Specifications

Specifications sourced from Biamp/Cambridge Sound manufacturer documentation. Kit coverage is an estimate.

Frequently Asked Questions

How much area does this kit cover?
With twenty-four active emitters, the kit is sized for approximately 2,400 sq ft. Final emitter spacing depends on ceiling height, ceiling type, and room layout, and more emitters can be added to the Qt X 600 for larger spaces.

What else do I need to power the Qt Active Emitters?
Active emitters need a PS-AE-3 power supply and a PI-AE power injector installed next to the first emitter on each run. One PI-AE has two channels, each powering up to 25 active emitters, and one PS-AE-3 feeds up to three injectors.

What is this kit compatible with?
The Qt X 600 drives Qt standard or Qt Active Emitters and shares audio with other Qt X controllers over AVB. Additional emitters, paging stations, and accessories are available in the Cambridge Sound collection.

Can this system handle paging and background music?
Yes. The two analog inputs on the Qt X 600 accept a paging source and a music player, and the same active emitters reproduce both alongside the masking signal.

How are the emitters installed?
Emitters mount in ceiling tile or hard ceilings on a planned grid and daisy-chain over Category UTP cable. A layout drawing sets emitter spacing and zone boundaries before installation.

Can I expand the system later?
Yes. The Qt X 600 supports up to 72,000 sq ft across six outputs, so you can add E-P-W emitter packs and power injectors as the space grows.

What warranty and support are included?
The Qt X 600 and Qt Active Emitters carry Biamp's five-year warranty. Creation Networks provides sound masking design, installation, commissioning, and ongoing support nationwide.