Meyer Sound ULTRA-X22 3-Pin Install Speaker, RMS, MILAN AVB - 09.306.201.01

Product Overview

The Meyer Sound ULTRA-X22 with MILAN AVB is the network-audio version of the narrow-coverage install loudspeaker in the ULTRA-X20 family. Its rotatable 80° x 50° constant-Q horn delivers focused, controlled coverage for longer-throw seating and acoustically sensitive rooms while integrating into networked AV systems. Two 5-inch low-frequency drivers and a 2-inch compression driver are powered by an internal three-channel Class-D amplifier. Milan-certified etherCON connectivity and integrated Compass monitoring make it well suited to managed installations.

Product Description

This digital ULTRA-X22 carries a Milan-certified audio format on an etherCON TOP connector while retaining the tighter 80° x 50° coverage that distinguishes the narrow model. A concentric driver configuration delivers coaxial-style point-source behavior with directional control of frequencies down to 600 Hz, and phase-corrected electronics maintain flat amplitude and phase response. AC power is supplied through a powerCON TRUE1 TOP connector with loop output, and monitoring is integrated directly into Compass Control Software. For an analog 3-pin version, see the standard ULTRA-X22; for different coverage, compare the ULTRA-X20 MILAN AVB and ULTRA-X23 MILAN AVB, or browse the full Meyer Sound range. Pair with a 750-LFC to extend low-frequency output.

Key Features

• MILAN-Certified Network Audio — A digital etherCON TOP connection carries Milan-certified audio for deterministic, low-latency networked distribution.
• Narrow 80° x 50° Coverage — A rotatable constant-Q horn delivers tighter directivity for longer throws and reduced adjacent-zone spill.
• Integrated Monitoring — Built-in monitoring through Compass Control Software requires no external RMS hardware.
• Concentric Driver Configuration — Two 5-inch cone drivers and a 2-inch compression driver provide point-source performance with directional control down to 600 Hz.
• High Output — Delivers a linear peak SPL of 128.5 dB measured with M-noise at a 20 dB crest factor.
• Self-Powered Three-Channel Amplifier — An onboard Class-D amplifier delivers 860 W peak with integrated crossover, correction filters, and driver protection.
• powerCON TRUE1 TOP Power — Locking AC input with loop output and automatic voltage selection from 90–265 V AC.
• Flexible Rigging — Integral M8 points on each end plus rear M6 threaded holes support pole, yoke, U-bracket, wall, and ceiling mounting.

Typical Applications

• House of Worship — Networked, focused coverage supports longer-throw sanctuary seating with controlled spill.
• Conference Room — Milan connectivity and tighter directivity integrate clean voice reinforcement into networked AV.
• Auditorium — Controlled pattern and integrated monitoring suit deeper seated venues.
• Government Space — Networked distribution and remote monitoring suit managed institutional installations.

Technical Specifications

Specifications sourced from Meyer Sound. Subject to change without notice.

Frequently Asked Questions

What is the difference between this version and the analog ULTRA-X22?
This version carries a Milan-certified digital audio format on an etherCON TOP connector with integrated monitoring, whereas the standard model uses an analog XLR 3-pin input. The acoustic performance is identical.

Why choose the narrow ULTRA-X22 coverage?
The 80° x 50° pattern provides tighter directivity for longer throws, narrow rooms, and controlling sound spill onto reflective surfaces.

Does it require an external monitoring module?
No. The digital version provides integrated monitoring directly through Compass Control Software with no separate RMS hardware required.

What connectors does it use?
Audio is carried on an etherCON TOP connector and AC power on a powerCON TRUE1 TOP connector with loop output.

Is this loudspeaker covered by warranty?
Yes. It is covered under Meyer Sound's standard product warranty. For details, please contact us.