Meyer Sound ULTRA-X22 3-Pin Install Speaker - 09.306.001.03
Meyer Sound ULTRA-X22 3-Pin Install Speaker - 09.306.001.03 is backordered and will ship as soon as it is back in stock.
Shipping Availability*
Shipping Availability*
Free Ground Shipping on Most Orders Over $250.00
Looking for the best price or expert advice? Give us a call at 1-888-230-3661 or use the Live Chat below. Buying 1 or 100, you may qualify for greater savings beyond the advertised price.
Meyer Sound ULTRA-X22 3-Pin Install Speaker - 09.306.001.03
Product Overview
The Meyer Sound ULTRA-X22 is the narrow-coverage member of the ULTRA-X20 family, a compact self-powered point-source loudspeaker engineered for installed AV applications that require tighter pattern control. Its rotatable 80° x 50° constant-Q horn delivers focused coverage for longer-throw seating, narrow rooms, and applications where adjacent-zone spill must be minimized. Two 5-inch low-frequency drivers and a 2-inch compression driver are powered by an internal three-channel Class-D amplifier. The analog 3-pin input and Intelligent AC supply make it a complete, install-ready reinforcement solution.
Product Description
The ULTRA-X22 shares the enclosure and electronics of the ULTRA-X20 but is fitted with a tighter 80° x 50° constant-Q horn for more controlled directivity. A concentric driver configuration provides coaxial-style point-source behavior with directional control of frequencies down to 600 Hz, while phase-corrected electronics maintain flat amplitude and phase response for accurate imaging. The analog input accepts a balanced XLR 3-pin signal with male loop output, and the loudspeaker auto-selects its operating voltage through Meyer Sound's Intelligent AC supply. For wider coverage, compare the ULTRA-X20; for the broad 110° x 110° pattern, see the ULTRA-X23, or browse the full Meyer Sound range. Pair with a 750-LFC to extend low-frequency output.
Key Features
- Narrow 80° x 50° Coverage — A rotatable constant-Q horn delivers tighter directivity for longer throws and reduced adjacent-zone spill.
- Concentric Driver Configuration — Two 5-inch cone drivers and a 2-inch compression driver provide point-source performance with directional control down to 600 Hz.
- High Output — Delivers a linear peak SPL of 128.5 dB measured with M-noise at a 20 dB crest factor.
- Self-Powered Three-Channel Amplifier — An onboard Class-D amplifier delivers 860 W peak with integrated crossover, correction filters, and driver protection.
- Intelligent AC Power Supply — Automatic voltage selection from 90–265 V AC with transient suppression, EMI filtering, and soft-start power-up.
- Compact Aluminum Enclosure — A 27 lb (12.3 kg) vented aluminum cabinet with textured black finish suits size- and weight-critical installations.
- Flexible Rigging — Integral M8 points on each end plus rear M6 threaded holes support pole, yoke, U-bracket, wall, and ceiling mounting.
Typical Applications
- House of Worship — Focused coverage supports longer-throw sanctuary seating with controlled spill onto walls and adjacent zones.
- Conference Room — Tighter directivity delivers consistent voice reinforcement in narrow or acoustically sensitive rooms.
- Auditorium — Controlled pattern supports deeper seating areas with predictable point-source behavior.
- Multi-Purpose Room — Flexible rigging and focused coverage adapt to reconfigurable event and assembly spaces.
- Training Room — Clear, directional output supports instructional audio and AV playback.
Technical Specifications
| Operating Frequency Range | 60 Hz – 18 kHz |
| Frequency Response | 65 Hz – 17.5 kHz ±4 dB |
| Phase Response | 95 Hz – 18 kHz ±45° |
| Linear Peak SPL | 128.5 dB with 20 dB crest factor (M-noise); 123.5 dB (Pink Noise); 125 dB (B-noise) |
| Coverage | Rotatable horn: 80° x 50° |
| Low Frequency | Two 5-inch cone drivers; 6 Ω nominal impedance |
| High Frequency | One 2-inch diaphragm compression driver on a rotatable horn; 8 Ω nominal impedance |
| Audio Input | Differential, electronically balanced; XLR 3-pin female input with male loop output |
| Input Impedance | 10 kΩ differential |
| Amplifier | Three-channel, Class-D; 860 W peak total output |
| THD, IM, TIM | <0.02% |
| AC Power | powerCON 20 input with loop output; automatic voltage selection 90–265 V AC, 50–60 Hz |
| Dimensions | W: 7.44 in (189 mm) x H: 19.04 in (484 mm) x D: 8.66 in (220 mm) |
| Weight | 27 lb (12.3 kg) |
| Enclosure | Aluminum with slightly textured black finish; powder-coated, round-perforated steel grille |
| Rigging | Two integrated M8 points on each end; four rear M6 threaded holes (127 mm x 70 mm pattern) |
Specifications sourced from Meyer Sound. Subject to change without notice.
Frequently Asked Questions
How does the ULTRA-X22 differ from the ULTRA-X20 and ULTRA-X23?
All three share the same enclosure and electronics. The ULTRA-X22 is the narrow 80° x 50° model, the ULTRA-X20 is the wide 110° x 50° model, and the ULTRA-X23 is the broad 110° x 110° model.
When should I choose the narrow ULTRA-X22?
Choose it where tighter directivity is needed for longer throws, narrow rooms, or to control sound spill onto reflective surfaces and adjacent zones.
Is the ULTRA-X22 self-powered?
Yes. It contains a three-channel Class-D amplifier rated at 860 W peak with integrated crossover, correction filtering, and driver protection.
Can the ULTRA-X22 be remotely monitored?
Yes. The analog version accepts an optional RMS module that reports operating parameters to a host computer running Compass Control Software via an RMServer hardware unit.
Is the ULTRA-X22 covered by warranty?
Yes. It is covered under Meyer Sound's standard product warranty. For details, please contact us.
At Creartion Networks, we do everything we can to create an excellent customer experience. This includes fast shipping and easy returns.
- Most in-stock orders placed Monday-Friday ship within 24-48 hours. General restrictions apply; please see our full shipping policy here.
- We offer a 30-day return policy from the delivery date on many products. Product restrictions apply. Restocking fees for the return of open-box items. Please see our full return policy here for more information.
Nationwide Audiovisual Services, Design, Installation & Support
Creation Networks is a trusted nationwide partner for complete audiovisual solutions — delivering expert AV system sales, professional design, programming, installation, and ongoing support to organizations across the United States.
From Microsoft Teams Rooms and enterprise video conferencing to LED video walls, live streaming production, and hybrid collaboration systems, we provide end-to-end AV integration using premium, certified technology from industry leaders including Crestron, Q-SYS, Shure, Extron, and Absen.
Whether you operate a single location or manage facilities nationwide, Creation Networks ensures your AV systems are designed for reliability, scalability, security, and long-term performance — helping your organization communicate more effectively and operate at peak efficiency.
CREATION NETWORKS — A PARTNER YOU CAN TRUST SINCE 2006
