RDL DS-RN2ML – Stainless Steel Dante Wall Plate, XLR and Mini-Jack
RDL DS-RN2ML – Stainless Steel Dante Wall Plate, XLR and Mini-Jack is backordered and will ship as soon as it is back in stock.
Shipping Availability*
Shipping Availability*
Free Ground Shipping on Most Orders Over $250.00
Looking for the best price or expert advice? Give us a call at 1-888-230-3661 or use the Live Chat below. Buying 1 or 100, you may qualify for greater savings beyond the advertised price.
RDL DS-RN2ML – Stainless Steel Dante Wall Plate, XLR and Mini-Jack
What is the RDL DS-RN2ML?
The RDL DS-RN2ML is a single-gang, stainless steel-finish Dante or AES67 wall plate interface with one XLR mic/line input, one 3.5 mm Mini-jack line input and two balanced outputs. It lets users connect a microphone and a laptop or media player at the wall, sending both onto the network as separate channels. The plate is PoE powered and configured in RDL CONSOLE or with the RDL Q-SYS plug-in.
How does it work?
The XLR input is converted to one Dante transmit channel, with five software-selectable gain settings: 35, 42 or 59 dB for microphones, and unity or 12 dB for line sources. P48 phantom power can be enabled in software when the XLR input is set for mic level. The stereo Mini-jack input is actively summed to mono and converted to a second Dante transmit channel. Its gain is optimized for -10 dBV sources and can be raised or lowered by 5 dB in software. Two network channels are converted to balanced line level on a rear-panel detachable wiring block, each delivering +4 dBu for -18 dBFS network audio. Each output has a software-controlled attenuator in 1 dB steps to -63 dB, then OFF. The outputs can drive local amplifiers or feed adjacent XLR jacks using an RDL DS-D2 dual plate with two AMS-XLRMA jacks. Green LEDs confirm PoE power and Dante sync, and the steel chassis mounts behind a stainless steel Decora front plate. The DS-RN2ML is engineered and manufactured in the U.S.A. by RDL.
What are the key features?
- 2x2 Dante or AES67 interface — Two transmit and two receive channels in one single-gang plate.
- XLR mic/line input — Software-selected gain of 35, 42 or 59 dB for mics, or unity or 12 dB for line sources.
- Mini-jack line input — A stereo 3.5 mm input is summed to mono with software gain of unity, +5 dB or -5 dB.
- Software-selectable P48 phantom — Phantom power is available on the XLR input when set for mic level.
- Two balanced rear outputs — Detachable wiring block outputs with 1 dB step attenuators to -63 dB, then OFF.
- PoE powered — Runs from an IEEE 802.3af PoE switch port with no local supply.
Where is it typically used?
- Conference rooms and boardrooms
- Training rooms and classrooms
- Multi-purpose rooms
- Houses of worship
- Government and commercial meeting spaces
Technical Specifications
| Network Connector | RJ45 with Link and Speed indicators |
| Digital Audio Ethernet Protocol | Dante or AES67 |
| Transmission Rate | 100 Mbps |
| Sample Rates Supported | 44.1 kHz, 48 kHz (default), 88.2 kHz, 96 kHz |
| Bit Depth Supported | 24 bits |
| Audio Operating Level | -18 dBFS = +4 dBu |
| Reference Level | 0 dBFS = +22 dBu |
| Mic/Line Input to Network Section | |
| Input | XLR (female) |
| Gain | Mic: 35 dB (LOW), 42 dB (MED), 59 dB (HIGH); Line: Unity (NORM), 12 dB (HIGH) |
| Input Level (for +4 dBu/-18 dBFS) | Mic: -31 dBu (LOW), -38 dBu (MED), -55 dBu (HIGH); Line: +4 dBu (LOW), -8 dBu (HIGH) |
| Input Level (maximum) | Mic: -14 dBu (LOW), -21 dBu (MED), -38 dBu (HIGH); Line: +23 dBu (LOW), +10 dBu (HIGH) |
| Input Impedance | > 1.2 kΩ |
| Phantom Power | P48, software-selectable |
| Standard for Phantom | IEC 61938: 2013 |
| Selectors per input (2) | Phantom, Gain, software-selectable |
| Frequency Response | 20 Hz to 20 kHz (± 0.5 dB) |
| Equivalent Input Noise | < -128 dBu (59 dB gain); < -130 dBu A-Weighted |
| Noise below -18 dBFS (20 to 20 kHz) | Mic: < -88 dB (LOW), < -82 dB (MED), < -68 dB (HIGH); Line: -88 dB (NORM), < -88 dB (HIGH) |
| THD+N | < 0.1% (20 Hz to 20 kHz, +4 dBu/-18 dBFS) |
| CMRR | > 65 dB (50 Hz to 120 Hz) |
| Crosstalk | Below Noise Floor (20 Hz to 20 kHz at operating level, input to input, max. gain) |
| Line Input to Network Section | |
| Input | Mini-jack, Stereo input summed to mono |
| Gain | Unity (NORM), -5 dB (LOW), 5 dB (HIGH) |
| Input Level (for +4 dBu/-18 dBFS) | L and R inputs driven: -10 dBV (NORM), -15 dBV (LOW), -5 dBV (HIGH); L input driven: -8 dBV (HIGH) |
| Frequency Response | 20 Hz to 20 kHz (± 0.35 dB) |
| Noise below -18 dBFS (20 to 20 kHz) | -84 dB (NORM), -86 dB (LOW), -79 dB (HIGH) |
| THD+N | < 0.1% (20 Hz to 20 kHz, +4 dBu/-18 dBFS) |
| Network to Line Outputs Section | |
| Outputs (2) | Balanced, detachable wiring block |
| Output Level (operating) | +4 dBu (nominal) balanced |
| Output Level (maximum) | +22 dBu balanced |
| Output Attenuator | Software-controlled, 0 to -63 dB and OFF (analog output per received network channel) |
| Output Impedance | 150 Ω balanced |
| Frequency Response | 20 Hz to 20 kHz (± 0.5 dB) |
| THD+N | < 0.1% |
| THD | < 0.01% (1 kHz) |
| Noise | < -80 dB (below +4 dBu); < -100 dB (below +22 dBu) |
| Crosstalk | Below Noise Floor (20 Hz to 20 kHz at operating level, output to output) |
| Headroom above -10 dBV | > 18 dB |
| Indicators (4) | Ethernet Link and Speed (2, rear panel); Sync and Power (2, front panel) |
| Ambient Operating Environment | 32° F to 122° F (0° C to 50° C) |
| Power Requirement | PoE Class 0, IEEE 802.3af |
| Dimensions | 1.80” (4.57 cm) W; 4.11” (10.44 cm) H; 2.09” (5.31 cm) D |
| Shipping Weight | 0.71 lbs. (0.32 kg) |
Frequently Asked Questions
How does the Mini-jack input handle stereo sources?
The left and right channels of the 3.5 mm input are actively summed to mono and sent as one Dante channel. Gain is set for -10 dBV sources, with software options of +5 dB or -5 dB.
Does the DS-RN2ML need a separate power supply?
No. The DS-RN2ML is powered over the network cable from a PoE switch port (PoE Class 0, IEEE 802.3af), so no local power supply is needed at the wall.
How is the DS-RN2ML configured?
Input gain, phantom power, output attenuation and Dante routing are set in RDL CONSOLE or other network control software. RDL also offers a Q-SYS plug-in for configuring the module inside a Q-SYS design.
What electrical box does the DS-RN2ML fit?
It fits a standard US single-gang electrical box. RDL lists the EP-1 adaptor for EU/UK square back boxes with 60 mm screw centers.
Is the DS-RN2ML available in another finish?
Yes. The same interface is sold as the RDL DB-RN2ML in a black finish, so you can match the faceplate to the room.
What warranty does the DS-RN2ML carry?
This product is covered by a 7-year RDL warranty. For warranty claims, RMAs or support, contact Creation Networks at (888) 230-3661 or sales@creationnetworks.net.
Can Creation Networks help design and commission the system?
Yes. Our team handles networked audio design, equipment selection, installation and commissioning for commercial projects nationwide. Call (888) 230-3661 to discuss your project.
At Creation Networks, we do everything we can to create an excellent customer experience. This includes fast shipping and easy returns.
- Most in-stock orders placed Monday-Friday ship within 24-48 hours. General restrictions apply; please see our full shipping policy here.
- We offer a 30-day return policy from the delivery date on many products. Product restrictions apply. Restocking fees for the return of open-box items. Please see our full return policy here for more information.
Nationwide Audiovisual Services, Design, Installation & Support
Creation Networks is a trusted nationwide partner for complete audiovisual solutions — delivering expert AV system sales, professional design, programming, installation, and ongoing support to organizations across the United States.
From Microsoft Teams Rooms and enterprise video conferencing to LED video walls, live streaming production, and hybrid collaboration systems, we provide end-to-end AV integration using premium, certified technology from industry leaders including Crestron, Q-SYS, Shure, Extron, and Absen.
Whether you operate a single location or manage facilities nationwide, Creation Networks ensures your AV systems are designed for reliability, scalability, security, and long-term performance — helping your organization communicate more effectively and operate at peak efficiency.
CREATION NETWORKS — A PARTNER YOU CAN TRUST SINCE 2006
