DCS SP-000063-00 – Replacement 15-Inch Cinema Woofer, 4-Inch VC, 4 Ohm

What is the DCS SP-000063-00 15-inch cinema woofer?

The DCS SP-000063-00 is a 15-inch cinema woofer with a 4-inch voice coil and 4 ohm impedance, supplied as a genuine DCS replacement driver. It is used to service low-frequency sections in existing DCS cinema loudspeaker installs. DCS, formerly part of the QSC DCS line, is now sold by Moving iMage Technologies, and this driver ships under MiT order code A015063-001. Replacing a blown woofer with the matching DCS part keeps the screen channel's output and impedance where the system design expects them.

How does the DCS SP-000063-00 work?

The SP-000063-00 is the low-frequency transducer that reproduces the bass range of a cinema loudspeaker behind the screen or in the auditorium. Its 15-inch cone and 4-inch voice coil are the size and motor class DCS specifies for this replacement. The 4 ohm impedance matters for amplifier loading: swapping in a driver with a different impedance changes the load the amplifier channel sees and can shift the system's tuning. DCS screen-channel systems built around 15-inch low-frequency sections include the DCS SC-1150, DCS SC-2150 and DCS SC-413C. Not every 15-inch DCS cabinet uses this exact driver, so confirm by model and serial number with Creation Networks at 888-230-3661 before ordering. After installation, recheck polarity and system tuning so the replacement driver matches the remaining drivers in the array. Creation Networks can also plan larger service work, such as replacing several drivers in a screen wall during an auditorium refresh.

What are the key features of the DCS SP-000063-00?

• 15-inch cinema woofer — The cone size DCS lists for this low-frequency replacement driver.
• 4-inch voice coil — A large voice coil class suited to cinema low-frequency duty.
• 4 ohm impedance — Matches the 4 ohm load the original DCS driver presents to the amplifier.
• Genuine DCS replacement — Ordered under MiT order code A015063-001 rather than a generic substitute.
• Service for existing installs — Restores low-frequency output in DCS cinema loudspeakers already in the field.

Where is the DCS SP-000063-00 typically used?

• Auditorium (cinema auditoriums and screening rooms)
• Multi-purpose room with a DCS cinema loudspeaker system

Technical Specifications

Frequently Asked Questions

Which DCS loudspeakers use the SP-000063-00?

It is a 15-inch, 4 ohm DCS cinema woofer. DCS 15-inch systems include the DCS SC-1150 and DCS SC-2150, but woofers vary by model and build, so confirm fit by model and serial number with Creation Networks before ordering.

Can I replace a 4 ohm woofer with an 8 ohm one?

Not without changing the system design. A different impedance changes amplifier loading and tuning, so replace like for like with the 4 ohm SP-000063-00 where it is the specified part.

Is this a QSC part?

DCS cinema loudspeakers were formerly part of the QSC DCS line and are now owned and sold by Moving iMage Technologies. This driver is a genuine DCS part under MiT order code A015063-001.

Can Creation Networks install the replacement woofer?

Yes. Creation Networks designs, installs and supports commercial AV and cinema systems nationwide and can replace drivers, check polarity and retune the system after service.

What do I need to order the correct part?

Have the loudspeaker model and serial number ready and call 888-230-3661. The team will confirm the part against your cabinet before the order is placed.

What warranty applies to this part?

Replacement parts carry the manufacturer's parts warranty. Contact Creation Networks for the current warranty terms on this driver.