Christie 140-154101-02 – QwikRig Rigging Frame V2 for Truss Mounting

What is the Christie 140-154101-02 QwikRig Rigging Frame V2?

The Christie 140-154101-02 is a part-number revision of the QwikRig Rigging Frame V2, the truss rigging and stacking frame for Christie GS Series, Inspire Series and Korus Series 1DLP laser projectors. Christie documents the V2 frame family as 140-154101-XX. It attaches to the underside of the projector, supports stacks of up to three, and was redesigned to accept L-shaped ultra short throw lenses.

What does the Christie 140-154101-02 do?

The frame lets you hang a compact laser projector from truss or a purpose-built structure, stack up to three projectors in landscape orientation, and rig the stack upright or inverted. It is a common choice for rental and staging inventories and for permanent installs where projectors need fine alignment for blending or brightness stacking.

Independent pitch, yaw and roll controls with lock-downs sit on every frame, so one projector can be trimmed without disturbing the rest of the stack. Standard 50 mm OD tubing works with common burger and industry clamps, and the open frame leaves room for filter changes and maintenance. A single projector can also be mounted in portrait orientation.

Supported projectors include Korus Series models such as the Christie 4K1000-KS, Inspire Series models such as the 4K860-iS, and GS Series models such as the DWU1400A-GS. If you are choosing between the -01 and -02 part numbers, contact us and we will confirm the current revision for your order.

What are the key features of the Christie 140-154101-02?

• Independent pitch, yaw and roll — lockable controls for quick, accurate image alignment.
• Three-high stacking — align any projector in the stack without moving the others.
• L-shaped UST lens support — required when using L-shaped UST lenses on supported models.
• 50 mm OD tubing — fits common burger and industry truss clamps.
• Portrait mounting — a single projector can be rigged in portrait orientation.
• Service access — open design keeps filters and service points reachable.

Where is the Christie 140-154101-02 typically used?

• Auditorium
• House of worship
• Multi-purpose room
• All-hands room
• Broadcast studio

Technical Specifications

Frequently Asked Questions

What is the difference between 140-154101-01 and -02?

Both are part numbers in Christie's QwikRig Rigging Frame V2 family (140-154101-XX). Christie does not publish the revision difference, so contact us to confirm which suffix ships for your project.

Which projectors are supported?

GS Series, Inspire Series and Korus Series 1DLP laser projectors listed by Christie. Browse them in our Christie Digital collection.

Can I stack projectors in portrait?

No. Portrait mounting is limited to a single projector; stacks of up to three must be landscape.

Are safety straps required?

Yes. Christie requires safety straps between stacked frames and whenever the frame is installed overhead. Straps are not included.

Can one person set it up?

Christie states installation and adjustment can be done by one person, but lifting a projector into the frame requires two people or rated lift equipment.

Can Creation Networks rig and commission the system?

Yes. We handle design, rigging, alignment and ongoing support nationwide.

What warranty applies?

Christie's standard limited warranty lists projector accessories sold separately from a projector at 1 year.