RGB Spectrum 920 12325 – QuadPlex VESA Mounting Bracket Kit

Product Overview

The 920 12325 is the QuadPlex VESA mounting bracket kit for QPX DIN and QPX HIN multi-display processors. It gives the installer a defined way to fix the processor to a wall, to structure, or to the VESA hole pattern on the back of a display, instead of leaving a small chassis loose on a shelf or cable-tied to a stud. That matters in digital signage and video wall work, where the processor usually needs to live within a short HDMI run of the displays it drives. The brackets are mechanical hardware only, with no electrical connection to the unit.

Product Description

QuadPlex processors are compact and light, which makes them easy to place close to the displays but also easy to mount badly. The 920 12325 brackets attach to the chassis and present a universal VESA mounting interface, so the unit can be bolted to the display's own rear pattern, to a VESA-compatible wall plate, or to a mount adapter already in the design. Fixing the processor behind the display keeps the four HDMI output runs short, keeps the head-end out of public reach, and removes the loose-chassis problem that turns into an intermittent fault six months after handover.

The kit is specified for the QPX DIN and the QPX HIN processors. Where the deployment is a rack-based head-end rather than a behind-display mount, the QPX RAK rackmount tray is the correct accessory instead. On a mounted unit, connector retention becomes more important than on a shelf unit, so the QPX BRK-4H output bracket and, on an HDMI-fed processor, the QPX BRK-1H input bracket are usually ordered at the same time.

Before ordering, confirm the VESA hole pattern and screw depth available on the target display or wall plate, the clearance behind the display once the processor and its cabling are in place, and whether the mount position leaves the network port and power inlet reachable for service. RGB Spectrum does not publish a dimensioned drawing or a supported VESA pattern list for this part number, so on a tight behind-display cavity those measurements should be confirmed before the hardware is committed.

Key Features

• Universal VESA mounting interface — The brackets let a QuadPlex processor bolt to a display's rear VESA pattern or to a VESA-compatible wall plate rather than sitting loose.
• Covers both QuadPlex models — One part number serves the DisplayPort-input QPX DIN and the HDMI-input QPX HIN, which simplifies procurement on mixed sites.
• Keeps output runs short — Mounting the processor at the display keeps the four HDMI output cables short, which reduces cable cost and 4K signal risk.
• Secures the head-end out of reach — A fixed processor behind a display or on a high wall position is far less exposed in public and commercial spaces than a shelf-mounted unit.
• Mechanical hardware only — There is nothing to power or configure, so the kit adds no commissioning time and no ongoing maintenance.

Technical Specifications

• Part number — 920 12325
• Item type — Mounting brackets with universal VESA mount
• Fits — QPX DIN and QPX HIN units
• Mounting interface — Universal VESA mount
• Quantity — Supplied as a bracket set
• Source — RGB Spectrum price list description

RGB Spectrum does not publish a datasheet for this part number. Contact Creation Networks for confirmed specifications before ordering.