Meyer Sound ULTRA-X22 3-Pin Install Speaker (with Weather Protection) - 09.306.001.04

Product Overview

The Meyer Sound ULTRA-X22 with Weather Protection is the IP54-rated narrow-coverage member of the ULTRA-X20 family, built for permanent outdoor and semi-exposed AV installations that require tighter pattern control. Its rotatable 80° x 50° constant-Q horn delivers focused coverage for longer-throw seating and exterior applications where adjacent-zone spill must be minimized. Two 5-inch low-frequency drivers and a 2-inch compression driver are powered by an internal three-channel Class-D amplifier. Weather-protected TOP connectors and treated components allow reliable operation in demanding environments.

Product Description

This weather-protected ULTRA-X22 shares the focused 80° x 50° acoustic design of the standard narrow model while adding an IP54 rating for resistance to dust and water. A concentric driver configuration delivers coaxial-style point-source behavior with directional control of frequencies down to 600 Hz, and phase-corrected electronics maintain flat amplitude and phase response. The analog audio input uses 3-pin XLR TOP (Total Outdoor Protection) connectors, and AC power is supplied through a powerCON TRUE1 TOP connector with loop output. For indoor projects, compare the standard ULTRA-X22; for wider or broader coverage, see the ULTRA-X20 and ULTRA-X23 weather-protected models, or browse the full Meyer Sound range. Pair with a 750-LFC to extend low-frequency output.

Key Features

• IP54 Weather Protection — A weather-protected build resists dust and water ingress for permanent outdoor and semi-exposed installations.
• Narrow 80° x 50° Coverage — A rotatable constant-Q horn delivers tighter directivity for longer throws and reduced adjacent-zone spill.
• TOP Connectors — 3-pin XLR TOP audio input and powerCON TRUE1 TOP power connectors are designed for Total Outdoor Protection.
• Concentric Driver Configuration — Two 5-inch cone drivers and a 2-inch compression driver provide point-source performance with directional control down to 600 Hz.
• High Output — Delivers a linear peak SPL of 128.5 dB measured with M-noise at a 20 dB crest factor.
• Self-Powered Three-Channel Amplifier — An onboard Class-D amplifier delivers 860 W peak with integrated crossover, correction filters, and driver protection.
• Flexible Rigging — Integral M8 points on each end plus rear M6 threaded holes support pole, yoke, U-bracket, wall, and ceiling mounting.

Typical Applications

• House of Worship — Weather-protected, focused coverage supports outdoor sanctuaries and longer-throw covered seating.
• Auditorium — Controlled pattern supports open-air and covered seated venues with predictable point-source behavior.
• Multi-Purpose Room — The IP54 build adapts to semi-exposed event and assembly spaces.
• Government Space — Durable construction suits civic plazas and exterior public-address installations.

Technical Specifications

Specifications sourced from Meyer Sound. Subject to change without notice.

Frequently Asked Questions

What weather rating does this version carry?
The weather-protected ULTRA-X22 is rated IP54 for resistance to dust and water. Refer to the Meyer Sound operating instructions for installation details.

How does it differ from the standard ULTRA-X22?
It adds weather-protected treatment and TOP connectors while retaining the same focused 80° x 50° coverage, acoustic performance, and enclosure dimensions.

What connectors does it use?
It uses 3-pin XLR TOP audio connectors and a powerCON TRUE1 TOP AC connector with loop output. The 5-pin RMS connector is not available on weather-protected models.

Why choose the narrow coverage?
The 80° x 50° pattern provides tighter directivity for longer throws and controlling sound spill onto adjacent surfaces in exterior venues.

Is this loudspeaker covered by warranty?
Yes. It is covered under Meyer Sound's standard product warranty. For details, please contact us.