Meyer Sound ULTRA-X22 3-Pin Install Speaker, RMS, MILAN AVB (with Weather Protection) - 09.306.201.02

Product Overview

The Meyer Sound ULTRA-X22 with MILAN AVB and Weather Protection combines networked digital audio with an IP54 rating in the narrow-coverage member of the ULTRA-X20 family. Its rotatable 80° x 50° constant-Q horn delivers focused coverage for longer-throw seating and exterior venues that rely on networked AV. Two 5-inch low-frequency drivers and a 2-inch compression driver are powered by an internal three-channel Class-D amplifier. Milan-certified etherCON connectivity and integrated Compass monitoring make it well suited to managed exterior installations.

Product Description

This variant pairs Milan-certified network audio with IP54 weather protection while retaining the focused 80° x 50° coverage of the narrow model, suiting permanent outdoor and semi-exposed networked AV systems. A concentric driver configuration provides coaxial-style point-source behavior with directional control of frequencies down to 600 Hz, and phase-corrected electronics maintain flat amplitude and phase response. Audio is carried on an etherCON TOP connector with integrated monitoring through Compass Control Software, and AC power is supplied through a powerCON TRUE1 TOP connector with loop output. For other configurations, compare the analog weather-protected ULTRA-X22, the indoor ULTRA-X22 MILAN AVB, or the broad ULTRA-X23 MILAN AVB. Browse the full Meyer Sound range, and pair with a 750-LFC to extend low-frequency output.

Key Features

• MILAN-Certified Network Audio — A digital etherCON TOP connection carries Milan-certified audio for deterministic, low-latency networked distribution.
• IP54 Weather Protection — A weather-protected build resists dust and water ingress for permanent outdoor and semi-exposed installations.
• Narrow 80° x 50° Coverage — A rotatable constant-Q horn delivers tighter directivity for longer throws and reduced adjacent-zone spill.
• Integrated Monitoring — Built-in monitoring through Compass Control Software requires no external RMS hardware.
• Concentric Driver Configuration — Two 5-inch cone drivers and a 2-inch compression driver provide point-source performance with directional control down to 600 Hz.
• High Output — Delivers a linear peak SPL of 128.5 dB measured with M-noise at a 20 dB crest factor.
• powerCON TRUE1 TOP Power — Locking, weather-protected AC input with loop output and automatic voltage selection from 90–265 V AC.
• Flexible Rigging — Integral M8 points on each end plus rear M6 threaded holes support pole, yoke, U-bracket, wall, and ceiling mounting.

Typical Applications

• House of Worship — Networked, weather-protected focused coverage supports outdoor sanctuaries and longer-throw covered seating.
• Auditorium — Controlled pattern and integrated monitoring suit open-air and covered seated venues.
• Multi-Purpose Room — Milan connectivity and the IP54 build adapt to semi-exposed networked event spaces.
• Government Space — Networked distribution and durable construction suit civic plazas and managed exterior installations.

Technical Specifications

Specifications sourced from Meyer Sound. Subject to change without notice.

Frequently Asked Questions

What does this configuration combine?
It combines Milan-certified network audio with IP54 weather protection in the narrow-coverage ULTRA-X22, suited to networked outdoor and semi-exposed AV systems.

Does it require an external monitoring module?
No. The digital version provides integrated monitoring directly through Compass Control Software with no separate RMS hardware required.

What connectors does it use?
Audio is carried on an etherCON TOP connector and AC power on a powerCON TRUE1 TOP connector with loop output.

Why choose the narrow ULTRA-X22 coverage?
The 80° x 50° pattern provides tighter directivity for longer throws and controlling sound spill in exterior venues.

Is this loudspeaker covered by warranty?
Yes. It is covered under Meyer Sound's standard product warranty. For details, please contact us.