Crestron SAROS ICS8T-W-T-EACH Saros® 8” In-Ceiling Subwoofer, White Textured, Single (must be ordered in multiples of 2)
Crestron SAROS ICS8T-W-T-EACH Saros® 8” In-Ceiling Subwoofer, White Textured, Single (must be ordered in multiples of 2) is backordered and will ship as soon as it is back in stock.
Shipping Availability*
Shipping Availability*
Free Ground Shipping on Most Orders Over $250.00
Looking for the best price or expert advice? Give us a call at 1-888-230-3661 or use the Live Chat below. Buying 1 or 100, you may qualify for greater savings beyond the advertised price.
Product Overview
The Crestron Saros ICS8T-W-T is an 8-inch in-ceiling subwoofer that adds extended low-frequency reinforcement to Saros 4, 6, and 8-inch full-range ceiling speakers in commercial distributed audio systems. This Crestron Saros in-ceiling subwoofer delivers a tailored 45 Hz to 125 Hz response and a built-in 70V/100V transformer for use on constant-voltage distributed speaker lines. Its plenum-rated metal back can and zero-bezel grille make it well suited to restaurants, retail, and houses of worship. The white textured finish is paintable to blend into the ceiling surface.
Product Description
The Saros ICS8T uses an 8-inch polypropylene woofer with rubber surround and a phase plug, ported through dual front ports for deep, full low-end output. Power handling is 100 Watts program at 8 Ohms, with a usable range down to 35 Hz and a built-in second-order 125 Hz low-pass filter that lets it integrate with full-range Saros speakers without a separate crossover. The integral transformer offers 60W or 120W taps at 70V and 120W at 100V, or it can be set to 8-Ohm bypass for low-impedance systems. Best performance is achieved with a biamplified system using a dedicated subwoofer amplifier channel.
Installation is handled with four integral two-step toggle clamps that accommodate ceiling surfaces up to 2.4 inches thick, an 11-5/16 inch recommended cutout, and an included tile bridge for drop-tile ceilings. The plenum-rated zinc-plated steel back can with top and side conduit knockouts meets the requirements for installation in environmental air-handling spaces, and the magnetically held frameless grille installs with no tools and includes a safety tether. The ICS8T is priced individually but must be ordered in multiples of two.
Key Features
- 8-Inch In-Ceiling Subwoofer — A polypropylene woofer with phase plug and dual front ports delivers deep low-frequency reinforcement from the ceiling plane.
- Built-In 70V/100V Transformer — Multi-tap operation (60W/120W at 70V, 120W at 100V) supports distributed constant-voltage systems, with an 8-Ohm bypass option.
- Integrated Low-Pass Filter — A second-order 125 Hz filter lets the subwoofer blend with full-range Saros speakers without an external crossover.
- Plenum-Rated Back Can — The zinc-plated steel enclosure meets UL 2043 for installation in environmental air-handling spaces.
- Tool-Free Zero-Bezel Grille — The magnetically held frameless grille installs without tools and includes a safety tether.
- Fast Toggle-Clamp Mounting — Four integral two-step toggle clamps support surfaces up to 2.4 in. thick, with an included tile bridge for drop-tile ceilings.
- Paintable Finish — The white textured grille can be painted to match the ceiling for a discreet appearance.
Typical Applications
- Restaurants, bars, and night clubs requiring full-range ceiling audio
- Retail spaces and shopping centers
- Houses of worship and convention facilities
- Universities, lecture halls, and corporate offices
- Background and foreground music and paging systems
Technical Specifications
| Model | SAROS ICS8T-W-T-EACH |
| Woofer | 8 in. (203 mm) polypropylene w/rubber surround, steel basket, phase plug |
| Impedance | 8 Ohms nominal (transformer set to 8Ω) |
| Transformer Taps | 60W or 120W at 70V; 120W at 100V |
| Low-Pass Filter | 125 Hz, 2nd order |
| Frequency Response | 45 Hz to 125 Hz (±3 dB); 35 Hz to 125 Hz (-10 dB) |
| Power Handling | 100 Watts program (8 Ohms) |
| Sensitivity | 90 dB @ 1W/1m |
| Input | (1) 4-pin 5mm detachable terminal block, parallel pass-thru; 12 AWG max |
| Mounting | Flush ceiling mount, 4 integral 2-step toggle clamps; 11-5/16 in. cutout; tile bridge included |
| Dimensions | 12.07 in. diameter x 9.10 in. depth |
| Weight | 14.0 lb (6.4 kg) |
| Compliance | UL Listed US & Canada, CE, FCC Part 15 Class B, UL 1480, UL 1480A, UL 2043 |
| Ordering | Priced individually; must be ordered in multiples of 2 |
Competitor Comparison
| Criteria | Saros ICS8T (this product) | Saros IC8T | Saros ICE8T |
| Speaker Type | Dedicated in-ceiling subwoofer for low-frequency reinforcement | Full-range 2-way in-ceiling speaker | Value-oriented full-range 2-way in-ceiling speaker |
| Frequency Response | 45 Hz to 125 Hz (±3 dB), tuned for bass | Full-range; refer to Crestron data sheet | 70 Hz to 20 kHz (±3 dB) |
| Power Handling | 100 W program at 8 Ohms | Refer to Crestron data sheet | 75 W program at 8 Ohms |
| Built-In Filter | 125 Hz low-pass, integrates without external crossover | Internal 2-way crossover for full-range output | Internal 2-way crossover for full-range output |
| Plenum Rating | UL 2043 plenum-rated back can | UL 2043 plenum-rated back can | UL 2043 plenum-rated back can |
| Best Use | Paired with full-range Saros speakers to extend low end | Premium standalone music and reinforcement coverage | Cost-sensitive paging and background music |
Frequently Asked Questions
Do I need an external crossover for this subwoofer?
No. The Saros ICS8T includes a built-in second-order 125 Hz low-pass filter so it integrates with full-range Saros 4, 6, and 8-inch speakers without a separate crossover. For best results, use a biamplified system with a dedicated subwoofer amplifier channel.
Can it be used on a 70V/100V distributed line?
Yes. The built-in transformer provides 60W or 120W taps at 70V and 120W at 100V, or it can be set to 8-Ohm bypass for low-impedance amplifier systems.
Is it rated for plenum installation?
Yes. The zinc-plated steel back can meets UL 2043 for installation in environmental air-handling (plenum) spaces, with top and side conduit knockouts provided.
Why must it be ordered in pairs?
The ICS8T is priced individually but must be ordered in multiples of two, consistent with typical stereo or zoned ceiling layouts. To pair it with matching full-range coverage, see the Saros ICE8T 8" in-ceiling speaker.
What warranty applies?
Crestron speaker products carry a limited warranty for the life of the product, except speaker grilles and outdoor-rated speakers which are warranted for five years. For system design or specification support, Contact Creation Networks.
At Creartion Networks, we do everything we can to create an excellent customer experience. This includes fast shipping and easy returns.
- Most in-stock orders placed Monday-Friday ship within 24-48 hours. General restrictions apply; please see our full shipping policy here.
- We offer a 30-day return policy from the delivery date on many products. Product restrictions apply. Restocking fees for the return of open-box items. Please see our full return policy here for more information.
Nationwide Audiovisual Services, Design, Installation & Support
Creation Networks is a trusted nationwide partner for complete audiovisual solutions — delivering expert AV system sales, professional design, programming, installation, and ongoing support to organizations across the United States.
From Microsoft Teams Rooms and enterprise video conferencing to LED video walls, live streaming production, and hybrid collaboration systems, we provide end-to-end AV integration using premium, certified technology from industry leaders including Crestron, Q-SYS, Shure, Extron, and Absen.
Whether you operate a single location or manage facilities nationwide, Creation Networks ensures your AV systems are designed for reliability, scalability, security, and long-term performance — helping your organization communicate more effectively and operate at peak efficiency.
CREATION NETWORKS — A PARTNER YOU CAN TRUST SINCE 2006












