AUDAC NWP400US/W – Dante/AES67 PoE Wall Panel, USB-C + Bluetooth, White
AUDAC NWP400US/W – Dante/AES67 PoE Wall Panel, USB-C + Bluetooth, White is backordered and will ship as soon as it is back in stock.
Shipping Availability*
Shipping Availability*
Free Ground Shipping on Most Orders Over $250.00
Looking for the best price or expert advice? Give us a call at 1-888-230-3661 or use the Live Chat below. Buying 1 or 100, you may qualify for greater savings beyond the advertised price.
AUDAC NWP400US/W – Dante/AES67 PoE Wall Panel, USB-C + Bluetooth, W...
What is the AUDAC NWP400US Dante wall panel?
The AUDAC NWP400US/W is a 1-gang US Dante/AES67 wall panel in white that puts USB-C and Bluetooth audio connections on the network. It is powered by PoE (802.3af) over one network cable and carries 4 channels of Dante/AES67 audio. It lets presenters, teachers and staff plug in a mic, laptop or phone anywhere the network reaches.
How does the AUDAC NWP400US Dante wall panel work?
The NWP400US converts its local inputs to Dante/AES67 right at the wall, so audio travels on the same network cable that powers the panel. There is no analog cable run back to the rack and no hum or interference pickup. Built-in processing handles gain, EQ, mixing and automatic level control before the signal leaves the panel. A front button puts the Bluetooth receiver in pairing mode, and an RGB LED shows its status. Setup is done in AUDAC Touch, and the panel works with any Dante/AES67 device, including the AUDAC LUNA-F DSP and AMP203 amplifier. It fits a standard 1-gang US box behind a glass-finish ABS front. Compare the NWP family below.
Compare the NWP network wall panels:
| Model | Connections | Phantom power | Outputs | US box |
|---|---|---|---|---|
| NWP220US | 2 x XLR + Bluetooth | +48 V | — | 1-gang |
| NWP222US | 2 x XLR in + 2 x XLR out + Bluetooth | +48 V | 2 x XLR | 2-gang |
| NWP300US | 3.5 mm + Bluetooth | — | — | 1-gang |
| NWP320US | 2 x XLR + 3.5 mm + Bluetooth | +48 V | — | 1-gang |
| NWP400US | USB-C + Bluetooth | — | — | 1-gang |
What are the key features of the AUDAC NWP400US Dante wall panel?
- Dante/AES67 at the wall — 4 network channels, no analog runs back to the rack.
- PoE powered — IEEE 802.3af over one network cable.
- Local inputs — USB Type-C audio, Bluetooth 4.2.
- Built-in DSP — gain, EQ, mixing and automatic level control.
- Bluetooth pairing button — with RGB status LED.
- US 1-gang box — glass-finish ABS front in white.
- AUDAC Touch setup — configure IP, names, levels and EQ.
- Warranty — backed by a 5-year AUDAC manufacturer warranty.
Where is the AUDAC NWP400US Dante wall panel typically used?
- Conference room
- Boardroom
- Training room
- Multi-purpose room
- Commercial meeting space
- Government space
- Auditorium
- House of worship
Technical Specifications
| Model | NWP400US/W – white, 1-gang US |
| Inputs | USB Type-C audio / Bluetooth 4.2 |
| Outputs | Network only |
| Network audio | Dante/AES67, 4 channels |
| Controls | 1 button – Bluetooth discoverable |
| Indicator | RGB LED – Bluetooth status |
| Configurable | IP, device name, gain, EQ, mixing |
| DSP | EQ; automatic level control |
| Power | PoE (IEEE 802.3af) |
| Network connector | RJ45 (network + PoE) |
| Configuration | AUDAC Touch |
| Compatibility | Any Dante/AES67 device |
| Installation | 1-gang US standard box |
| Front finish | ABS with glass |
| Color | White (RAL9003) |
| Warranty | 5 years |
Frequently Asked Questions
What do I need to run the NWP400US?
A PoE (802.3af) network switch port and a Dante/AES67 receiver, such as a DSP, matrix or Dante amplifier. Setup is in AUDAC Touch.
Does it need a power supply?
No. It runs entirely on PoE.
What size wall box does it need?
A standard 1-gang US electrical box.
Does it work with non-AUDAC Dante gear?
Yes. It is standard Dante/AES67, so it works with Dante DSPs and amplifiers from other brands.
Can guests pair a phone?
Yes. Press the front button to make the Bluetooth receiver discoverable.
Where can I see the full lineup?
See the AUDAC collection.
Can Creation Networks install and configure it?
Yes. We design, install, program and support AUDAC systems nationwide. Call (888) 230-3661.
At Creation Networks, we do everything we can to create an excellent customer experience. This includes fast shipping and easy returns.
- Most in-stock orders placed Monday-Friday ship within 24-48 hours. General restrictions apply; please see our full shipping policy here.
- We offer a 30-day return policy from the delivery date on many products. Product restrictions apply. Restocking fees for the return of open-box items. Please see our full return policy here for more information.
Nationwide Audiovisual Services, Design, Installation & Support
Creation Networks is a trusted nationwide partner for complete audiovisual solutions — delivering expert AV system sales, professional design, programming, installation, and ongoing support to organizations across the United States.
From Microsoft Teams Rooms and enterprise video conferencing to LED video walls, live streaming production, and hybrid collaboration systems, we provide end-to-end AV integration using premium, certified technology from industry leaders including Crestron, Q-SYS, Shure, Extron, and Absen.
Whether you operate a single location or manage facilities nationwide, Creation Networks ensures your AV systems are designed for reliability, scalability, security, and long-term performance — helping your organization communicate more effectively and operate at peak efficiency.
CREATION NETWORKS — A PARTNER YOU CAN TRUST SINCE 2006
