AUDAC KYRA6/W – Compact 6 x 2" Design Column Speaker, White

What is the AUDAC KYRA6/W column speaker?

The AUDAC KYRA6/W is a passive 6 x 2" column speaker that packs 6 aluminium-cone 2-inch full-range drivers into a slim aluminium enclosure, finished in white. It is built to put intelligible speech and background music into reverberant rooms, where a conventional box speaker excites the whole space and turns announcements into echo. It connects to a 12 Ω amplifier channel or on a 70V/100V constant-voltage line through its built-in multi-tap transformer. Typical installs include smaller meeting rooms, classrooms and chapels where a short, discreet column covers the seating area.

How does the AUDAC KYRA6/W work?

A column array works by stacking identical drivers in a vertical line. Their outputs combine in phase straight ahead and cancel above and below, so the AUDAC KYRA6/W throws a wide, flat sheet of sound across the seating area instead of into the ceiling and back walls. AUDAC specifies the dispersion at 174° horizontally and 28° vertically (−6 dB, averaged 1–4 kHz), which is the band that carries speech consonants. Less energy on reflective surfaces means less reverberation, better speech intelligibility and more gain before feedback for nearby microphones.

The included two-way revolving bracket pans the column up to 42° left or right and tilts it down up to 13°, so the beam can be aimed at the listeners from a side wall or column. Power taps are selected with a rotary switch on the rear of the speaker, so the installer sets the 70V/100V tap without removing the grille. Sensitivity is 90 dB (1W/1m) with frequency range of 120 Hz–20 kHz (−10 dB). For music programs that need more low end, AUDAC pairs KYRA columns with its architectural subwoofers such as the ARCHI10 and BASSO series.

Choosing between sizes comes down to room length and reverb: a longer column narrows the vertical beam and carries further.

What are the key features of the AUDAC KYRA6/W?

• Line-array driver layout — 6 x 2" aluminium-cone drivers are spaced to control vertical dispersion and reduce echo in reflective rooms.
• Wide horizontal coverage — A 174° horizontal pattern covers a wide seating area from a single side-wall position.
• Aimable mounting bracket — The included two-way revolving bracket pans 42° each way and tilts down 13° to point the beam at the audience.
• Slim aluminium enclosure — A 2.76-inch-wide aluminium body blends into architectural spaces where a box speaker would stand out.
• 70V/100V and low-impedance operation — A multi-tap line transformer runs the speaker on distributed constant-voltage lines or directly at 12 Ω.
• 5-year AUDAC warranty — AUDAC covers the KYRA series with a five-year manufacturer warranty.

Where is the AUDAC KYRA6/W typically used?

• House of worship
• Conference room
• Training room
• Multi-purpose room
• Government space

Technical Specifications

Frequently Asked Questions

Can the AUDAC KYRA6/W run on a 70V or 100V system?

Yes. Its built-in multi-tap transformer offers 20 W (70V, 250 Ω); 100V 20 W / 70V 10 W (500 Ω); 100V 10 W / 70V 5 W (1000 Ω); 100V 5 W / 70V 2.5 W (2000 Ω). It can also run directly at 12 Ω.

How high should the AUDAC KYRA6/W be mounted?

Most column installs place the acoustic center at or slightly above seated ear height, then use the 13° down-tilt to aim at the back rows. We confirm heights with coverage modelling during design; AUDAC publishes EASE Focus data for the KYRA series.

Does the AUDAC KYRA6/W need a subwoofer?

For speech, no. For music in worship or event spaces, pairing KYRA columns with an AUDAC ARCHI or BASSO subwoofer extends the low end below the column's 120 Hz range.

Can the AUDAC KYRA6/W be used on a speaker stand?

Yes, with the AUDAC MBK260 35 mm stand adapter for KYRA columns.

What warranty does the AUDAC KYRA6/W carry?

AUDAC covers the KYRA series with a five-year manufacturer warranty, and Creation Networks supports warranty claims on systems we supply.

Is the AUDAC KYRA6/W compatible with other AUDAC and third-party equipment?

Yes. It is a passive speaker, so any amplifier matched to its impedance or line voltage will drive it, including AUDAC amplifiers and DSPs controlled from AUDAC Touch. See the full AUDAC lineup for matching amplifiers, subwoofers and accessories.

Can Creation Networks design and install a KYRA system?

Yes. Our CTS-D engineers model coverage, specify amplification and tap settings, and install and support AUDAC systems nationwide. Call (888) 230-3661 or email sales@creationnetworks.net.