Replacing a Laser Projector Without a Room Redesign in a City Building

Tensioned projection screen showing a bright image from the new Panasonic laser projector in an event room at Mitchell Park Community Center in Palo Alto, California.

Creation Networks |

At a glance

  • Client: City of Palo Alto, a Bay Area city government
  • Location: Mitchell Park Community Center, 3700 Middlefield Road, Palo Alto, California — event room
  • Scope: A like-for-like laser projector replacement: a Panasonic PT-MZ882BU7 8,200-lumen WUXGA projector, a Panasonic ET-ELW20 zoom lens and a Chief RPMA302 mount, installed in the room's existing ceiling enclosure
  • Platform: Panasonic PT-MZ882 series 3LCD laser projection, existing screen and room systems retained

The situation

Mitchell Park Community Center is one of the City of Palo Alto's public facilities, with event rooms used for city programs and community bookings. One of those rooms depends on a ceiling-mounted projector and a large projection screen. The projector needed replacing.

The city did not want a room redesign. It wanted the projector back in service with a current model, in the same position, aimed at the same screen, run by the same room systems. That is a common request in government AV work, where a single failed component should not turn into a capital project. Cities, counties and school districts buy this kind of work through our state, local and education AV practice.

We knew the facility type. On an earlier City of Palo Alto project we had replaced the fabric, roller and motor on a community center's Da-Lite tensioned projection screen. This time the job was the projector end of the throw.

What made a simple swap worth planning?

A projector replacement looks easy until the new unit has to land in an old position. Three things have to line up. The new projector has to fit the existing ceiling enclosure. Its lens has to fill the existing screen from the existing distance. And the mount has to hold it where the old one did.

A mismatch on any of the three turns a swap into a redesign. The wrong lens means moving the projector or the screen. A body that doesn't fit the enclosure means ceiling work. A mount that doesn't suit the new chassis means a new mounting plan.

The purchasing path mattered too. As a public agency, the city bought through a formal quotation and purchase order. The purchase order had to track the quote, and delivery had to meet the city's receiving rules.

Panasonic PT-MZ882B projector carton and a lensless projector body on a cart in the event room at Mitchell Park Community Center, Palo Alto, California.
Projector hardware staged on a cart in the event room during the swap, with the Panasonic PT-MZ882B carton on top.

How did we choose the replacement?

Our AV design and engineering team specified the Panasonic PT-MZ882, an 8,200-lumen WUXGA laser projector from Panasonic's 3LCD range. It is one of the commercial projectors built for large, bright rooms that are used for many kinds of events. A laser light source also removes lamp changes from the room's maintenance list.

The proposal and purchase order named the white PT-MZ882WU7. The unit installed, per our serial number record and the carton on site, is the black PT-MZ882BU7. The optics and brightness are the same; only the chassis color differs.

The projector body takes interchangeable lenses. We paired it with a Panasonic ET-ELW20, a 1.3 to 1.7:1 fixed zoom lens from Panasonic's projector lens line. The zoom range gives room to fit the image to the screen from the projector's position without moving either one.

For mounting, we supplied a Chief RPMA302, an RPA Elite projector mount with a Key A interface and an SLM302 included. It carries the projector in the ceiling enclosure and allows fine adjustment once the image is on the screen. It is one of the projector mounts we use when a replacement has to hit an existing screen.

Panasonic PT-MZ882 series laser projector running inside its ceiling enclosure, seen from a lift, at Mitchell Park Community Center in Palo Alto, California.
The replacement Panasonic laser projector powered up in the existing ceiling enclosure, photographed from the lift during installation.

Equipment

Room Count Projector Lens Mount Notes
Event room, Mitchell Park Community Center 1 Panasonic PT-MZ882BU7, 8,200 lm WUXGA laser Panasonic ET-ELW20, 1.3 to 1.7:1 Chief RPMA302 Existing ceiling enclosure, screen and room systems retained

Parts list

Function Model Qty installed
Laser projector, 8,200 lumens, WUXGA Panasonic PT-MZ882BU7 (Panasonic PT-MZ882 series) 1
Fixed zoom lens, 1.3 to 1.7:1 Panasonic ET-ELW20 1
Projector mount, RPA Elite Key A with SLM302 Chief RPMA302 1
Existing, retained Ceiling enclosure, projection screen, room control and signal path —

The rollout

The work followed the city's procurement steps. We issued a quotation for the three parts, labor and logistics. The city's purchasing office then issued a purchase order “in accordance with” that quotation, line for line.

The order was F.O.B. destination, and the city accepts deliveries only between 7:00 a.m. and 3:00 p.m. unless other arrangements are made. The ship-to address on the purchase order was the city's Lucie Stern Community Center, not Mitchell Park itself.

On site, we staged the hardware on a cart in the event room. We took down the old projector and mounted the new one in the existing ceiling enclosure from a lift. Then we fitted the lens and brought the image up on the room's screen.

At closeout, the project record holds the installed equipment list, the projector serial number, the Panasonic O&M manuals and our warranty documents. When the room needs service later, whoever responds can see exactly what is in the ceiling.

Keeping a community room in service

A room booked for community events is judged on whether the projector works when the event starts. Laser projectors remove lamp changes, but they still collect dust on filters and drift out of alignment. Their firmware also moves on. Our AV maintenance and support plans cover that routine work. Our broader AV services handle one-off replacements like this one for rooms that are otherwise working well. The same approach applies to other multipurpose rooms that host meetings one day and private events the next.

Projector replacement FAQ

Frequently Asked Questions — Replacing a Laser Projector in a Community Center Event Room

Answers to the questions facilities managers and city IT staff ask most often about swapping a ceiling projector without redesigning the room.

Can a ceiling projector be replaced without redesigning the room?

Yes: at Palo Alto's Mitchell Park Community Center, Creation Networks replaced an event room projector with a Panasonic PT-MZ882BU7 laser projector, an ET-ELW20 zoom lens and a Chief RPMA302 mount, installed in the existing ceiling enclosure and aimed at the existing screen, with no room redesign.

The room's screen, control and signal path stayed in place. Only the projector, lens and mount were new.

How bright should a projector be for a community center event room?

For the Mitchell Park Community Center event room, Creation Networks specified the Panasonic PT-MZ882, an 8,200-lumen WUXGA 3LCD laser projector, suited to a large room that hosts meetings, presentations and community events on a big projection screen.

The laser light source also removes lamp replacements from the room's maintenance schedule.

Why does a replacement projector need a separate lens?

Installation projectors such as the Panasonic PT-MZ882 take interchangeable lenses, so at Mitchell Park Community Center Creation Networks paired the projector body with a Panasonic ET-ELW20, a 1.3 to 1.7:1 fixed zoom lens chosen to fill the existing screen from the existing projector position.

The zoom range gives some room to fit the image without moving the projector or the screen.

What mount holds a replacement ceiling projector?

At Mitchell Park Community Center, Creation Networks supplied a Chief RPMA302, an RPA Elite projector mount with a Key A interface and an SLM302 included, to carry the new Panasonic PT-MZ882BU7 in the room's existing ceiling enclosure and allow fine adjustment once the image was on screen.

A new mount matched to the new chassis avoids adapting an old mount to a projector it was never built for.

How is a ceiling projector swapped out in an event room?

At Mitchell Park Community Center, Creation Networks staged the new Panasonic PT-MZ882BU7 and its lens on a cart in the event room, removed the old projector, mounted the new one in the existing ceiling enclosure from a lift, then fitted the lens and brought the image up on the room's screen.

Because the enclosure, screen and room systems stayed in place, the work stayed at the projector end of the room.

Does a new projector need a new projection screen?

Not necessarily: the Mitchell Park Community Center replacement covered only a Panasonic PT-MZ882BU7 projector, an ET-ELW20 lens and a Chief RPMA302 mount, and the event room kept its existing projection screen, with the new lens chosen to fill that screen from the projector's position.

Keeping a screen that is in good condition keeps the replacement small.

Can you replace just the fabric on a tensioned projection screen?

Yes: on an earlier City of Palo Alto community center project, Creation Networks replaced the fabric and roller assembly on a Da-Lite Tensioned Professional screen with a Parallax Stratos 1.0 surface, 132 by 212 inches with a 48-inch black drop, and replaced the 120 V motor assembly.

The existing screen case stayed in place, so only the moving parts and the viewing surface changed.

How does a city buy an AV equipment replacement?

For the Mitchell Park Community Center projector, Creation Networks issued a quotation, and the City of Palo Alto's purchasing office issued a purchase order “in accordance with” it, F.O.B. destination, with deliveries accepted between 7:00 a.m. and 3:00 p.m. at the city's Lucie Stern Community Center.

The purchase order lines matched the quotation for equipment, labor and logistics.

What records should a city keep after a projector replacement?

For the Mitchell Park Community Center replacement, the project record holds the installed equipment list, the projector's serial number, the Panasonic O&M manuals and Creation Networks' warranty documents, so a future service call starts with a known model and configuration.

The serial number record is also where the installed model, PT-MZ882BU7, is confirmed.

Creation Networks, Inc. — nationwide commercial AV integrator, CTS-D certified, based in Concord, CA and Incline Village, NV. Design, engineering, programming, installation, and support from a single point of contact. Call 888-230-3661 or email sales@creationnetworks.net.

Projector replacement

Let’s Talk About Your Projector

Tell us the room, the projector that’s in it now and what’s wrong with it, and a CTS-D engineer will reply within one business day to set up a site visit or room assessment — no charge, no obligation.

Or call 1.888.230.3661 · Capability statement (PDF)
Creation Networks · Commercial AV integrator, all 50 states since 2006.

Stay Updated!

Be the first to get exclusive deals, industry insights, and company updates!

RECENT POSTS
Tensioned projection screen showing a bright image from the new Panasonic laser projector in an event room at Mitchell Park Community Center in Palo Alto, California.

Replacing a Laser Projector Without a Room Redesign in a City Building

Mission Barns conference room in San Francisco with a wall-mounted display on the Google Meet home screen, a Logitech Meetup camera below it and a Logitech Tap controller on the table.

Seven Rooms, One Google Meet Standard: Mission Barns SF

Lectern equipment rack in a Life Chiropractic College West classroom in Hayward, California, with a Luxul AMS-1816P PoE+ switch, Atlona HDBaseT extenders and AT-RON-444, an HP mini PC and a Furman M-8x2 power conditioner.

Eight Classrooms on One Lecture Capture Standard in Hayward, California

NEC NP-PA653UL laser projector on a Chief ceiling mount and extension column, with seismic restraint cables, below the exposed concrete ceiling of a San Francisco cafe inside Rincon Center.

Modern Cafe AV Inside a Historic San Francisco Landmark

Conference room at Indeed's downtown Austin, Texas office with a wall-mounted display and camera above a live-edge table, black ceiling and floor-to-ceiling windows.

Two Austin Buildings, Two Timelines: Indeed’s Conference Room AV

Adding Wireless Presentation to Two City Building Rooms Without a Rebuild