Adding Wireless Presentation to Two City Building Rooms Without a Rebuild

Creation Networks |

At a glance

  • Client: Russell Reynolds Associates, a global executive search and leadership advisory firm
  • Location: The firm’s Palo Alto, California office on Homer Avenue — a small and a medium conference room
  • Scope: A Barco ClickShare CSE-200 and a Crestron HD-DA-2 distribution amplifier in each room, feeding the owner’s display and the existing Lifesize system, a wide-angle camera swap in the medium room, and Savant programming changes
  • Platform: Existing Lifesize video conferencing and Savant control, kept in place

The situation

Russell Reynolds Associates runs client meetings and candidate interviews out of its Palo Alto office. Two of its meeting rooms, a small conference room and a medium one, already had a working Lifesize video conferencing system and Savant control. What they did not have was wireless presentation. Anyone who wanted to share a laptop had to plug in.

The ask was narrow. Add wireless sharing to both rooms. Make sure the shared screen reached the far end of a Lifesize call, not only the display in the room. In the medium room, replace the camera with a wide-angle model the firm supplied. Update the Savant programming so the new source behaved like part of the room.

That kind of targeted change is common in conference room AV for professional-services firms. The rooms work. One capability is missing. Nobody wants a rebuild to get it.

We knew these rooms. Our records for this office go back to the original Savant boardroom control system we installed to a Gensler design. That design was drawn two ways: a direct-connect option with no HDMI video switch, and an option built around an eight-port HDMI switch under Savant control. The office was built on the switched design, with Lifesize systems and Savant iPad control in the meeting spaces. A Polycom upgrade, a replacement rack UPS and a run of service calls followed.

That history shaped the wireless upgrade. We already knew how the rooms were wired and controlled, so the new source could be added without reopening the design.

What made a small upgrade tricky?

The wireless signal had to land in two places at once. A ClickShare base unit has one HDMI output. The room needed that picture on the owner-furnished display for people at the table, and on an input of the Lifesize codec for people on the call. Sending it to only one of them would have solved half the problem.

The rest of the room had to stay as it was. The Lifesize system, the display and the Savant control all belonged to a working room, and the scope did not replace any of them. The new parts had to fit around them.

Savant itself added a step. On this system, even small changes, such as renaming rooms, had needed escalation to Savant in the past. Adding a new source meant a programming change, not just a new cable.

The medium room also needed a wider view. Its existing camera was being replaced with an owner-furnished wide-angle camera, so the same visit had to cover both the new source and the camera swap.

How did we design the wireless upgrade?

We used the same build in both rooms. A Barco ClickShare CSE-200 base unit (part R9861520NA) sits in each room with its two USB buttons. A presenter plugs in a button, presses it and the laptop screen appears. There is no software to install on a guest laptop and no cable to find.

The ClickShare output runs into a Crestron HD-DA-2, a one-to-two HDMI distribution amplifier and audio converter. One output feeds the owner’s display. The other feeds an HDMI input on the Lifesize unit. That split is what makes the shared screen part of the call: remote participants see the same content as the room, because the codec receives it as a content source.

Each room’s pick list is short: the ClickShare, the distribution amplifier, three Liberty HDPMM06F six-foot 18 Gbps HDMI cables and one 10-foot network patch cable. Nothing in the room was pulled out.

Control stayed on Savant. The scope called for Savant programming changes so the ClickShare input sat inside the room’s existing control logic rather than working as a separate box. That is AV control programming work, and it is the part of a small upgrade that is easiest to underestimate.

In the medium room, the owner-furnished wide-angle camera replaced the existing one, giving the Lifesize system a wider view of the table. The small room kept its camera.

A base-and-button system like the CSE-200 is one of several wireless collaboration systems we install. Here it fit because the rooms already had a codec and control, and needed a source rather than a new platform.

Equipment by room type

Room type Count Display Codec/platform Camera Wireless presentation Control Notes
Small conference room 1 Owner-furnished Existing Lifesize Existing Barco ClickShare CSE-200 Existing Savant, programming updated Crestron HD-DA-2 splits ClickShare to display and Lifesize input
Medium conference room 1 Owner-furnished Existing Lifesize Owner-furnished wide-angle camera, replacing the existing camera Barco ClickShare CSE-200 Existing Savant, programming updated Same split as the small room

Parts list

Function Model Qty installed
Wireless presentation base unit with two USB buttons Barco ClickShare CSE-200 (R9861520NA) 2
1-to-2 HDMI distribution amplifier and audio converter Crestron HD-DA-2 (6503809) 2
HDMI cables, 6 ft, 18 Gbps Liberty HDPMM06F 6
Network patch cable Ethernet, 10 ft 2
Video conferencing codec Lifesize (existing) —
Room control Savant (existing) —
Displays and medium-room wide-angle camera Owner-furnished —

Network and IT

Each ClickShare base unit got a 10-foot network patch cable. The pick list carries no network switch or access point, so the base units connected to the firm’s existing network rather than a separate AV network we supplied.

Everything else in the signal path is HDMI. Six short Liberty HDPMM06F cables connect the ClickShare, the HD-DA-2, the display and the Lifesize input across the two rooms, and the distribution amplifier keeps both legs of the split live at the same time.

The rack in this office has its own history. A failed APC power supply once took the AV rack offline. We replaced it with an APC SRT3000RMXLT-NC Smart-UPS, a 3000 VA, 120 V rack-mount unit, with a three-year warranty extension, and added a shelf for the Savant transmitters. Planning power and placement around a rack like that is part of our AV integration services.

The scope names no firewall rules, certificates or security review for the ClickShare units. If your IT team needs those documented, we cover them during the AV design and engineering stage.

The rollout

The work followed the scope in order. We installed the ClickShare base unit and distribution amplifier in the small conference room, terminated the ClickShare into the amplifier input and split its HDMI output to the display and the Lifesize input. The medium room got the same build, plus the camera swap.

The Savant programming changes came last, once both rooms had the new hardware in place. Photos in the project file show the Savant app running on an iPad during that step.

Because nothing was removed except the medium room’s old camera, each room kept its existing display, codec and control through the visit.

Support from here

This office shows why rooms need someone watching them. Our service records cover a string of fixes over the years: restoring the picture to private offices fed by an Atlona HDMI matrix and baluns, after a power cycle recommended by Atlona support; room renaming that needed escalation to Savant; and the failed rack UPS that took the AV rack offline until we replaced it.

Each of those was a small fault. Left alone, each would have looked like a broken room to the person trying to start a meeting. A wireless source, a codec input and a control change are three more things that can drift when firmware, passwords or laptops change. Our AV maintenance and support plans and AV help desk exist so those faults get caught before the next client meeting.

The same firm’s San Francisco office runs a different standard. Read how we built AV room by room for the firm’s San Francisco relocation.

Wireless presentation FAQ

Frequently Asked Questions — Adding a Wireless Presentation System to an Existing Conference Room

Answers to the questions office managers and IT leads ask most often about adding wireless sharing to rooms that already have video conferencing.

How does wireless presentation content reach remote participants on a video call?

In Russell Reynolds’ Palo Alto conference rooms, Creation Networks ran each Barco ClickShare CSE-200 into a Crestron HD-DA-2 one-to-two HDMI distribution amplifier, sending one output to the room display and the other to an HDMI input on the existing Lifesize codec, so remote participants see the same shared screen as the room.

Without that split, the ClickShare picture would reach only the local display. The codec needs its own copy of the signal to send it as content on the call, which is the core of most video conferencing solutions we build.

What does a ClickShare CSE-200 need in a conference room?

For each Palo Alto room, the Creation Networks pick list for the Barco ClickShare CSE-200 held the base unit with two USB buttons, a Crestron HD-DA-2 distribution amplifier, three six-foot Liberty HDPMM06F HDMI cables and one 10-foot network patch cable, with the owner’s display and existing Lifesize codec kept in place.

Presenters plug a button into a laptop and press it to share. No software install is needed on a guest laptop.

Can wireless presentation be added without replacing an existing Lifesize system?

Yes: at Russell Reynolds’ Palo Alto office, Creation Networks added a Barco ClickShare CSE-200 to two rooms and kept the existing Lifesize codec, the owner-furnished displays and the Savant control, feeding the ClickShare into a spare HDMI input on each Lifesize unit through a Crestron HD-DA-2 distribution amplifier.

The only part removed was the medium room’s camera, which the firm replaced with its own wide-angle model.

Does adding a new source to a Savant-controlled room need programming?

Yes: on the Palo Alto project, the Creation Networks scope included Savant programming changes alongside the Barco ClickShare CSE-200 install, so the new wireless input sat inside each room’s existing control logic instead of working as a separate box that users would have to switch to manually.

On this system, earlier changes such as renaming rooms had also needed escalation to Savant. We plan for that step up front.

What order is a wireless presentation upgrade installed in?

In Russell Reynolds’ Palo Alto rooms, Creation Networks installed the ClickShare CSE-200 and Crestron HD-DA-2 first, terminated the ClickShare into the amplifier and split the HDMI output to the display and Lifesize input, then swapped the medium room’s camera and finished with the Savant programming changes.

Each room kept its display, codec and control through the work, because none of them were replaced.

Can a camera be replaced during a wireless presentation upgrade?

Yes: in Russell Reynolds’ Palo Alto medium conference room, Creation Networks replaced the existing camera with an owner-furnished wide-angle camera during the same visit that added the Barco ClickShare CSE-200, giving the existing Lifesize system a wider view of the table without a separate project.

The small conference room kept its original camera. Only the room that needed wider coverage changed.

What can take a conference room AV rack offline?

At Russell Reynolds’ Palo Alto office, a failed APC power supply and battery backup took the AV rack offline, and Creation Networks replaced it with an APC SRT3000RMXLT-NC 3000 VA Smart-UPS with a three-year warranty extension, adding a shelf for the Savant transmitters at the same time.

A rack UPS protects the equipment, but it is also a single point of failure. It needs checking like everything else in the rack.

What kinds of service calls does an office AV system need?

Creation Networks’ service records for Russell Reynolds’ Palo Alto office include restoring picture to private offices fed by an Atlona HDMI matrix and baluns after a power cycle Atlona recommended, room renaming that needed Savant escalation, and replacing a failed rack UPS that had taken the AV rack offline.

None were major faults, but each would have stopped a meeting. That is the case for a maintenance and support plan.

Technology partners on this project

Barco logo Crestron logo APC logo Liberty AV logo

Creation Networks, Inc. — nationwide commercial AV integrator, CTS-D certified, based in Concord, CA and Incline Village, NV. Design, engineering, programming, installation, and support from a single point of contact. Call 888-230-3661 or email sales@creationnetworks.net.

Conference room upgrades

Let’s Talk About Your Existing Rooms

Tell us what your rooms already run and what is missing, and a CTS-D engineer will reply within one business day to set up a site walk or room assessment — no charge.

Or call 1.888.230.3661 · Capability statement (PDF)
Creation Networks · Commercial AV integrator, all 50 states since 2006.

Stay Updated!

Be the first to get exclusive deals, industry insights, and company updates!

RECENT POSTS
Mission Barns conference room in San Francisco with a wall-mounted display on the Google Meet home screen, a Logitech Meetup camera below it and a Logitech Tap controller on the table.

Seven Rooms, One Google Meet Standard: Mission Barns SF

Lectern equipment rack in a Life Chiropractic College West classroom in Hayward, California, with a Luxul AMS-1816P PoE+ switch, Atlona HDBaseT extenders and AT-RON-444, an HP mini PC and a Furman M-8x2 power conditioner.

Eight Classrooms on One Lecture Capture Standard in Hayward, California

NEC NP-PA653UL laser projector on a Chief ceiling mount and extension column, with seismic restraint cables, below the exposed concrete ceiling of a San Francisco cafe inside Rincon Center.

Modern Cafe AV Inside a Historic San Francisco Landmark

Conference room at Indeed's downtown Austin, Texas office with a wall-mounted display and camera above a live-edge table, black ceiling and floor-to-ceiling windows.

Two Austin Buildings, Two Timelines: Indeed’s Conference Room AV

Adding Wireless Presentation to Two City Building Rooms Without a Rebuild

Workplace Digital Signage and Training Rooms at an SF Retail HQ