Vaddio 440-1007-008 – USB 3.2 Gen 2x1 Active Optical Cable Type-C to Type-A Plenum (26.2')

Product Overview

The Vaddio 440-1007-008 is a 26.2-foot (8-meter) USB 3.2 Gen 2x1 active optical cable with Type-C to Type-A connectors, plenum-rated (CMP) for direct installation in air-handling spaces without conduit. Delivering up to 10 Gbps SuperSpeed+ throughput, this USB-C active optical plenum cable is engineered for commercial AV environments where modern Type-C host connections — such as those found on current-generation laptops, USB-C docking stations, and AV control processors — must connect to USB 3.0 cameras and AV capture devices. The active optical fiber design eliminates EMI/RFI susceptibility and removes the distance ceiling imposed by passive copper USB-C cables. It is port-powered, requires no drivers, and is compatible with Vaddio ConferenceSHOT and RoboSHOT camera platforms.

Product Description

As commercial AV hardware transitions toward USB-C connectivity — driven by laptop manufacturers, BYOD standards, and the USB4 roadmap — integrators increasingly need a plenum-rated USB-C cable that can span practical conference room distances without signal loss. The 440-1007-008 addresses this need with active optical fiber construction, which supports the full 10 Gbps bandwidth of USB 3.2 Gen 2x1 over an 8-meter run while remaining lighter and slimmer than traditional copper alternatives. This makes it straightforward to route through conduit, raceways, or directly through plenum ceilings on qualifying installations.

The CMP plenum rating meets NEC Article 800 requirements for cable installation in air-handling ceiling spaces and raised-floor plenums, eliminating the cost and labor of running separate plenum conduit in many commercial building scenarios. The cable is powered entirely from the host USB-C port — no local power supply is needed at the camera or device end — and operates plug-and-play on any compliant USB 3.0 or USB 3.2 operating system. It carries both data and limited bus power as permitted by the USB specification, though it is not designed as a device-charging cable.

The 440-1007-008 bridges the Type-C host to the Type-A input found on Vaddio ConferenceSHOT AV, RoboSHOT cameras, AV Bridge Mini, AV Bridge 2x1, and AV Bridge MatrixMIX — allowing integrators to standardize on a single cable type as Type-C host ports become the norm in corporate AV buildouts. Its optical construction resists the EMI interference present in AV racks and ceiling plenum spaces, maintaining clean signal transmission throughout the run.

Key Features

• USB 3.2 Gen 2x1 — Up to 10 Gbps — Delivers SuperSpeed+ throughput for high-bandwidth USB AV applications, double the 5 Gbps rate of USB 3.0 Gen 1 cables.
• Type-C to Type-A Connectors — Bridges modern USB-C host ports (laptops, docks, AV processors) to Type-A USB 3.0 cameras and AV devices.
• CMP Plenum Rating — Certified for direct installation in air-handling ceiling spaces per NEC Article 800, reducing conduit requirements on compliant projects.
• Active Optical Fiber Construction — Maintains signal integrity over 26.2 feet (8 meters) without a repeater hub, while resisting EMI/RFI interference.
• USB Port Powered — Draws power from the host USB-C port; no external power supply or injector needed at the device end.
• Lightweight and Slim Profile — Fiber composite construction is thinner and lighter than copper, simplifying pulls through conduit and raceways.
• No Drivers Required — Plug-and-play compatible with Windows, macOS, and any USB 3.0/3.2 operating system.
• Broad Vaddio Device Compatibility — Works with ConferenceSHOT AV, RoboSHOT series, AV Bridge Mini, AV Bridge 2x1, and AV Bridge MatrixMIX.
• EMI/RFI Immune — Optical fiber eliminates susceptibility to electromagnetic interference in dense cabling and rack environments.

Typical Applications

• Boardroom — Connects a USB-C equipped host laptop or conferencing appliance to a PTZ camera over practical boardroom distances with a single plenum-rated cable.
• Conference Room — Supports BYOD environments where attendees connect via USB-C docking stations or laptops with no Type-A ports to USB 3.0 room cameras.
• Government Space — CMP plenum rating and no-driver operation satisfy code compliance and IT security requirements in government AV installations.
• Training Room — Provides sufficient run length for camera placement at the front of medium-sized training rooms connected to USB-C host systems at the presenter position.
• Commercial Meeting Space — Ideal for managed meeting spaces standardizing on USB-C infrastructure with USB 3.0 camera ecosystems already in place.

Technical Specifications

Frequently Asked Questions

Q: What makes the 440-1007-008 different from the 440-1005-065 plenum cable?

The 440-1007-008 uses USB-C to Type-A connectors and supports USB 3.2 Gen 2x1 at up to 10 Gbps over 8 meters. The 440-1005-065 uses Type-A to Type-B connectors and supports USB 3.0 at 5 Gbps over 20 meters. Choose the 440-1007-008 when your host system uses a USB-C port; choose the 440-1005-065 for longer runs or Type-B device inputs.

Q: Is this cable compatible with USB4 or Thunderbolt hosts?

The cable is rated for USB 3.2 Gen 2x1 operation. While it uses a USB-C connector, compatibility with USB4 or Thunderbolt hosts depends on the host implementation. For AV camera connections, USB 3.2 Gen 2x1 performance is the design target.

Q: Does the 440-1007-008 require an external power source?

No. The active optical components are powered entirely from the host USB-C port. No wall adapters or power injectors are required at the camera or device end.

Q: Can this cable be installed directly in a plenum ceiling without conduit?

Yes, in jurisdictions and installations where CMP-rated cable is accepted for direct plenum installation per NEC Article 800. Always confirm compliance with your local Authority Having Jurisdiction (AHJ) before installation.

Q: Is this cable backward compatible with USB 2.0 devices or hosts?

No. As an active optical cable, the 440-1007-008 requires USB 3.0 or higher at both ends. It is not backward compatible with USB 2.0 or USB 1.1.

Q: What Vaddio cameras and devices is this cable verified to work with?

Vaddio has confirmed compatibility with ConferenceSHOT AV, RoboSHOT series PTZ cameras, AV Bridge Mini, AV Bridge 2x1, and AV Bridge MatrixMIX. The Type-A device connector connects to the USB input on these devices.

Q: What warranty covers this product?

Vaddio (Legrand AV) products are backed by a manufacturer's warranty. Contact Creation Networks for current warranty terms and RMA procedures applicable to the 440-1007-008.