Vaddio RoboSHOT IW Smart Glass OneLINK HDMI - In-Wall PTZ Camera System (Primed)

Product Overview

The Vaddio RoboSHOT In-Wall Smart Glass OneLINK HDMI System (Primed, 999-9965-180) is a semi-flush in-wall PTZ camera for corporate boardrooms, executive conference rooms, and interior design-sensitive commercial spaces. The primed wall plate is ready to paint to match any room color, making it the preferred choice when the camera installation must blend invisibly into a custom-finished wall. The smart glass panel is frosted-opaque when the camera is off and fully transparent when powered on. Combined with the OneLINK HDMI interface, this system delivers HDMI video, power, and bidirectional control over a single Ethernet cable up to 328 feet.

Product Description

The primed finish version of the RoboSHOT In-Wall Smart Glass OneLINK HDMI System (999-9965-180) is the highest-quality interior option for installations where the wall plate must match a custom or non-standard wall finish. AV integrators and general contractors can paint the bezel to match any paint specification, ensuring the camera installation is architecturally invisible when the camera is off. The smart glass transitions from opaque to clear when the camera is active, so occupants always know the camera state without an indicator light.

The OneLINK HDMI interface provides HDMI video output at up to 1080p/60 and routes power and bidirectional control from the rack or interface point to the in-wall camera over a single Cat-5e or Cat-6 cable. For installations feeding a display, codec, or HDMI switcher, this is a clean, minimal-cable solution. Control interfaces include RS-232 and IP (Ethernet/Telnet), compatible with Crestron, AMX, Extron, Q-SYS, and other room control systems. For installations requiring USB 3.0, IP streaming, or HD-SDI outputs in addition to HDMI, the OneLINK Bridge version of this system provides those capabilities.

Key Features

• Smart Glass Panel - Frosted-opaque when camera is off, transparent when on — a discreet, architecturally integrated status indicator.
• Primed Finish - Paintable wall plate for custom color-matching in design-sensitive corporate and executive installations.
• Single-Cable HDBaseT - Power, HDMI video, and bidirectional control over one Cat-5e or Cat-6 cable up to 328 feet.
• OneLINK HDMI Interface - Delivers HDMI video up to 1080p/60 from the in-wall camera to any HDMI input device.
• 1080p/60 Resolution - Full HD video for sharp conference room imaging.
• RS-232 and IP Control - Compatible with Crestron, AMX, Extron, Q-SYS, and other commercial room control systems.
• Web UI and Telnet Control - Remote camera configuration and management via browser or Telnet.

Typical Applications

• Boardroom
• Conference room
• Commercial meeting space
• Government space
• Multi-purpose room

Technical Specifications

Frequently Asked Questions

What cable is required for installation?
A single Cat-5e or Cat-6 Ethernet cable carries power, HDMI video, and bidirectional control to the camera. Runs up to 328 feet are supported.

Can this camera be integrated with Crestron or AMX?
Yes. RS-232 and IP (Ethernet/Telnet) bidirectional control make this compatible with Crestron, AMX, Extron, Q-SYS, and most commercial control platforms.

What does the primed finish mean?
The primed finish means the wall plate comes ready to paint. AV installers or finishing contractors can match the camera bezel to any wall paint specification.

What is the difference between the OneLINK HDMI and OneLINK Bridge versions?
The OneLINK HDMI version (this product) provides HDMI output only. The OneLINK Bridge version adds simultaneous USB 3.0, IP streaming, HD-SDI, and a configurable audio matrix with AEC. Choose this version when HDMI output to a codec, display, or switcher is the primary integration requirement.

What warranty is included?
Vaddio products typically carry a 3-year limited warranty. Contact Creation Networks for warranty and support details.