Tannoy DVS 601-WH 6.5" Coaxial Surface-Mount Loudspeaker with Transformer (White,Pair) - TA-DVS 601-WH

Product Overview

The Tannoy DVS 601-WH is a 6.5-inch coaxial surface-mount loudspeaker with a built-in 30 W line transformer in white, sold as a pair. Part of the DVS 1.0 Series, it combines a controlled 90-degree conical pattern with enough low-frequency body to carry background music as convincingly as speech. IP64-rated with a UL 94 V-0 ABS enclosure and certified to EN 54-24 and UL 1480, it works as readily in a life-safety voice alarm system as in a hospitality music zone.

Product Description

Supplied as a pair, the DVS 601-WH sits in the sweet spot of Tannoy's DVS 1.0 Series — a newer, weather-rated and life-safety-certified line, distinct from the earlier DVS 6t. A 165 mm (6.5-inch) mineral-filled polypropylene low-frequency driver is paired coaxially with a 20 mm ferrofluid-cooled soft-dome tweeter crossing over at 3,500 Hz. Coaxial geometry keeps the whole coverage area on the same acoustic axis, so intelligibility holds up across the room rather than only under the box — the practical difference between a system people can follow and one they tune out. Power handling is 30 W continuous, 60 W programme and 120 W peak, reaching 100 dB average and 106 dB peak SPL with a 90-degree conical pattern that suits mid-height mounting and moderate throws. The built-in transformer offers 30 W / 15 W / 7.5 W / 3.8 W taps at 70V and 30 W / 15 W / 7.5 W at 100V, plus a low-impedance position for 8-ohm direct drive. The enclosure is UV-resistant, UL 94 V-0 rated ABS in a semi-matte white finish that disappears against light walls and ceilings, fronted by a colour-matched aluminium mesh grille and rated to IP64 for covered outdoor use. Phoenix/Euroblock connectors with link-thru simplify daisy-chained runs, and a colour-matched steel yoke bracket with finger-adjustable hardware is included. EN 54-24:2008 and UL 1480 certification make it eligible for voice evacuation systems. Browse the full Tannoy loudspeaker collection at Creation Networks to build out a matching multi-zone system.

Key Features

• Sold as a Pair — This listing supplies two DVS 601-WH loudspeakers for stereo or multi-zone surface-mount installations.
• 6.5-inch Coaxial Driver — A 165 mm mineral-filled polypropylene woofer and 20 mm ferrofluid-cooled soft-dome tweeter share one acoustic axis, crossing over at 3,500 Hz.
• 90-Degree Conical Coverage — Controlled dispersion for mid-height mounting and moderate throws.
• Built-In 30 W Transformer — 70V and 100V taps plus an 8-ohm low-impedance bypass for flexible system design.
• EN 54-24 and UL 1480 Certified — Approved for life-safety voice alarm and evacuation systems.
• IP64 Weather Resistance — Suitable for covered outdoor and washdown-adjacent environments.
• Semi-Matte White Finish — Blends into light walls and ceilings, with a colour-matched aluminium mesh grille.
• Link-Thru Connectors — Phoenix/Euroblock terminals with link-thru speed up daisy-chained runs.
• Steel Yoke Bracket Included — A colour-matched steel bracket with finger-adjustable hardware ships in the carton.
• DVS 1.0 Series — The current generation, not to be confused with the earlier DVS 6t, which has different power, impedance and no IP rating.

Typical Applications

• Hospitality venues, bars and restaurants
• Retail floors and showrooms
• Covered outdoor terraces and walkways
• Voice alarm and evacuation systems

Technical Specifications

Frequently Asked Questions

Is the DVS 601-WH sold individually or as a pair?
This listing is sold as a pair, supplying two surface-mount loudspeakers.

How is the DVS 601 different from the older DVS 6t?
The DVS 601 is part of the newer DVS 1.0 Series. It is IP64-rated, 8 ohms nominal, and certified to EN 54-24 and UL 1480 — none of which applies to the earlier DVS 6t. Do not substitute one for the other on spec.

Can it be used in a fire alarm or voice evacuation system?
Yes. It carries EN 54-24:2008 and UL 1480 certification. Confirm the installation meets your local authority's requirements.

Does it work on 70V/100V distributed systems?
Yes. A 30 W transformer provides taps at both 70V and 100V, and a low-impedance position allows direct 8-ohm drive.

Should I choose the DVS 401, 601 or 801?
The 401 gives the widest pattern for low ceilings and short throws, the 601 balances coverage and output for general-purpose zones, and the 801 offers the tightest pattern and most output for higher mounting and longer throws.

Where can I get project pricing?
Contact Creation Networks for project pricing, amplifier matching and AV design support.