Salamander Infiniti Conference Table, 14 Person, Dual Mic, Large Dove Top, Cisco Oak Trim, Graphite Pedestal - IC/14L/DM/D/BOK/GT

Product Overview

The Salamander Infiniti IC/14L/DM/D/BOK/GT is the top configuration in the Infiniti range: a 14-person conference room table for Cisco Panorama with two factory microphone cutouts, built on the Large Dove top with Cisco Oak trim. It combines maximum seating, full table-mic audio, and the warmer oak perimeter specified for executive boardrooms.

Product Description

Two table microphones is the minimum workable specification across fourteen seats, and even then rooms with hard surfaces or mechanical noise commonly add a ceiling array. The pair distributes pickup across the arc and provides redundancy, so a failed device does not take a boardroom offline during a meeting that matters.

Both cutouts are machined at the factory into specified locations so the microphones sit flush, with cabling routed internally through the graphite pedestal alongside power and signal distribution. The Cisco Oak trim sits better alongside oak and walnut paneling than the tonal Dove option. Cutouts are dimensioned to the microphone model and cannot be retrofitted.

Key Features

• Dual Factory Microphone Cutouts — Two flush positions across the fourteen-seat arc.
• Cisco Oak Trim — Warmer perimeter detail for executive boardrooms with wood millwork.
• Audio Redundancy — A second microphone keeps the boardroom usable if one fails.
• Fourteen-Person Configuration — The largest Infiniti configuration.
• Internal Cable Management — Power, signal, and both mic runs route through the pedestal.

Typical Applications

• Boardroom
• Executive conference room
• All-hands and leadership meeting room
• Government and public-sector conference room
• Commercial meeting space

Technical Specifications

Frequently Asked Questions

Is dual-mic adequate across fourteen seats?

It is the minimum workable table-mic specification at this size. Rooms with hard surfaces or HVAC noise often add a ceiling array alongside. Our design team can assess the acoustics before you specify.

Can cutouts be added after the build?

No. They are machined at the factory and cannot be retrofitted without compromising the top.

What should we plan for on delivery and installation?

Freight delivery with in-room assembly, coordinated against the AV install. At this size, check door and corridor clearances during planning. Contact our team to schedule.