RDL SF-BNC2 – Unbalanced Stereo Dante Interface, PoE is backordered and will ship as soon as it is back in stock.
Shipping Availability*
Shipping Availability*
Free Ground Shipping on Most Orders Over $250.00
Looking for the best price or expert advice? Give us a call at 1-888-230-3661 or use the Live Chat below. Buying 1 or 100, you may qualify for greater savings beyond the advertised price.
What is the RDL SF-BNC2?
The RDL SF-BNC2 is a SYSFLEX bidirectional Dante interface for unbalanced stereo audio. It converts left and right consumer-level sources to Dante and returns two Dante channels to unbalanced outputs on RCA and 3.5 mm Mini-jack connectors. PoE power and no-software setup make it an easy way to add media players, PCs and consumer gear to a Dante system.
How does it work?

Two unbalanced inputs are available on RCA jacks or a stereo 3.5 mm Mini-jack, and two unbalanced outputs appear on both RCA and Mini-jack connectors. Each input provides a network level of -20 dBFS for a -10 dBV source, and each output delivers -10 dBV for a -20 dBFS network level. Dante sample rates of 44.1, 48, 88.2 and 96 kHz are selectable. No special software is required to set up the module. Conversion is 24-bit with RDL analog filtering for low noise and low distortion. The SF-BNC2 runs from PoE (Class 0, IEEE 802.3af), and a green LED confirms valid power and Dante sync. It is built in an all-metal enclosure for free-standing, surface or rack mounting, and the SF-UCB2 under-counter bracket pair supports under-counter installation.
What are the key features?
- Bidirectional stereo — Two unbalanced inputs to Dante and two Dante channels to unbalanced outputs.
- RCA and Mini-jack — Inputs and outputs on front-panel RCA jacks and 3.5 mm Mini-jacks.
- Selectable sample rates — 44.1, 48, 88.2 or 96 kHz Dante operation.
- No software setup — Special software is not required to configure the module.
- PoE powered — Runs from an IEEE 802.3af PoE switch port.
- SYSFLEX mounting — Free-standing, surface or rack mounting in an all-metal enclosure.
Where is it typically used?
- Conference rooms and huddle rooms
- Training rooms and classrooms
- Retail and background music systems
- Houses of worship
- Multi-purpose rooms
Technical Specifications
| Network Connector | RJ45 with Link and Speed indicators |
| Digital Audio Ethernet Protocol | Dante |
| Transmission Rate | 100 Mbps |
| Sample Rates Supported | 44.1 kHz, 48 kHz (default), 88.2 kHz, 96 kHz |
| Bit Depth Supported | 24 bits |
| Audio Operating Level | -20 dBFS = -10 dBV |
| Reference Level | 0 dBFS = +10 dBV |
| Line Inputs to Network Interface | |
| Inputs (4) | Mini-jack Stereo or RCA jacks (2, L and R) |
| Input Level (for +4 dBu/-20 dBFS) | -10 dBV nominal |
| Input Level (maximum) | +10 dBV |
| Input Impedance | > 15 kΩ |
| Frequency Response | 20 Hz to 20 kHz (± 0.5 dB) |
| Noise below -20 dBFS (20 to 20 kHz) | < -80 dB |
| Crosstalk | < -85 dB (L into R, R into L, 20 Hz to 20 kHz) |
| THD+N | 0.02% at 1 kHz (typ) |
| Headroom | 20 dB |
| Network to Line Outputs | |
| Outputs (4) | Mini-jack Stereo or RCA jacks (2, L and R) |
| Output Level (operating) | -10 dBV nominal |
| Output Level (maximum) | +10 dBV |
| Output Impedance | 40 Ω |
| Frequency Response | 20 Hz to 20 kHz (± 0.5 dB) |
| THD+N | < 0.1% |
| Noise | < -75 dB (below -10 dBV) |
| Crosstalk | < -70 dB (20 Hz to 20 kHz) |
| Headroom above -10 dBV | 20 dB |
| Indicators (3) | Ethernet Link and Speed (2, rear panel); Sync (front panel) |
| Ambient Operating Environment | 32° F to 122° F (0° C to 50° C) |
| Power Requirement | PoE Class 0, IEEE 802.3af |
| Dimensions | 2.79" (7.09 cm) W; 1.68" (4.27 cm) H; 5.77" (14.66 cm) D |
| Shipping Weight | 1.115 lbs. |
Frequently Asked Questions
What sources can I connect to the SF-BNC2?
Unbalanced consumer-level sources such as PCs, media players and streamers, using RCA jacks or a 3.5 mm Mini-jack.
Does the SF-BNC2 need software to configure?
No. RDL states special software is not required for module setup.
How is it powered?
From a PoE switch port (Class 0, IEEE 802.3af).
How can it be mounted?
Free-standing, surface mounted or rack mounted; the SF-UCB2 bracket pair supports under-counter mounting.
What warranty does the SF-BNC2 carry?
This product is covered by a 7-year RDL warranty. For warranty claims, RMAs or support, contact Creation Networks at (888) 230-3661 or sales@creationnetworks.net.
Can Creation Networks help design and commission the system?
Yes. Our team handles networked audio design, equipment selection, installation and commissioning for commercial projects nationwide. Call (888) 230-3661 to discuss your project.
At Creation Networks, we do everything we can to create an excellent customer experience. This includes fast shipping and easy returns.
- Most in-stock orders placed Monday-Friday ship within 24-48 hours. General restrictions apply; please see our full shipping policy here.
- We offer a 30-day return policy from the delivery date on many products. Product restrictions apply. Restocking fees for the return of open-box items. Please see our full return policy here for more information.
Nationwide Audiovisual Services, Design, Installation & Support
Creation Networks is a trusted nationwide partner for complete audiovisual solutions — delivering expert AV system sales, professional design, programming, installation, and ongoing support to organizations across the United States.
From Microsoft Teams Rooms and enterprise video conferencing to LED video walls, live streaming production, and hybrid collaboration systems, we provide end-to-end AV integration using premium, certified technology from industry leaders including Crestron, Q-SYS, Shure, Extron, and Absen.
Whether you operate a single location or manage facilities nationwide, Creation Networks ensures your AV systems are designed for reliability, scalability, security, and long-term performance — helping your organization communicate more effectively and operate at peak efficiency.
CREATION NETWORKS — A PARTNER YOU CAN TRUST SINCE 2006























