RDL HD-MA35UA – 35 W Mixer Amplifier, 25/70/100 V
RDL HD-MA35UA – 35 W Mixer Amplifier, 25/70/100 V is backordered and will ship as soon as it is back in stock.
Shipping Availability*
Shipping Availability*
Free Ground Shipping on Most Orders Over $250.00
Looking for the best price or expert advice? Give us a call at 1-888-230-3661 or use the Live Chat below. Buying 1 or 100, you may qualify for greater savings beyond the advertised price.
RDL HD-MA35UA – 35 W Mixer Amplifier, 25/70/100 V
What is the RDL HD-MA35UA?
The RDL HD-MA35UA is a four-input mixer amplifier with a 35 W constant-voltage output for 25 V, 70 V or 100 V distributed speaker systems. It combines background music, paging and music-on-hold in one unit and adds a second 4 W zone for an 8 Ω speaker. Front-panel level and tone controls give users direct adjustment, and the master level can also be set from an RDL remote or a 0 to 10 Vdc control. It is a strong fit for offices, retail spaces, corridors and waiting areas served by ceiling speakers on a constant-voltage line.
How does it work?
The Zone 1 mixer on the front panel provides four input level controls plus bass and treble controls that can be switched to affect the line output as well. The Zone 1 amplifier delivers 35 W RMS on a 25 V, 70 V or 100 V line for multi-speaker paging and background music. Master volume is VCA controlled through an RJ45 port compatible with RDL remotes such as the RDL D-RLC10KM, or with standard 0 to 10 Vdc or 10 kΩ controls. The Zone 2 mixer on the rear panel uses installer-set trimmers. Inputs 1 and 2 are switch-selectable for mic or line level with switchable 24 V phantom, and Input 1 has a transformer-isolated line input with push-to-talk terminals and an adjustable VOX circuit. Paging on Input 1 can duck inputs 2, 3 and/or 4 by 25 dB, with a rear-panel trimmer that delays the fade-up from 2 to 6 seconds. Inputs 3 and 4 accept unbalanced mono or stereo line sources on RCA jacks. Zone 2 adds a 4 W amplifier for an 8 Ω speaker, a 600 Ω transformer-balanced music-on-hold output and a balanced line output that can feed another amplifier. The mixer and amplifiers enter standby sleep mode when audio is absent and draw less than 1 W, waking about 2 seconds after audio returns. The HD-MA35UA is engineered, tested and manufactured in the U.S.A. and includes its power supply.
What are the key features?
- Two amplifier zones — Zone 1 delivers 35 W on a 25 V, 70 V or 100 V line and Zone 2 delivers 4 W into 8 Ω for a second area.
- Paging priority ducking — Automatic VOX or contact-closure paging on Input 1 ducks other inputs by 25 dB.
- Music-on-hold output — A 600 Ω transformer-isolated output feeds telephone systems.
- Bass and treble controls — Front-panel tone controls with center detent shape the Zone 1 sound.
- Energy-saving sleep mode — Standby consumption is below 1 W including the supplied power supply.
- Remote master volume — An RJ45 VCA port accepts RDL remote controls or 0 to 10 Vdc control.
Where is it typically used?
- Commercial meeting space
- Multi-purpose room
- Government space
- House of worship
- Training room
Technical Specifications
| Model | HD-MA35UA |
| Amplifier Zones (2) | Zone 1 (Main): 35 W RMS, front-panel mixer (user controls); Zone 2: 4 W RMS (8 Ohms), rear-panel mixer (trimmers) |
| Audio Inputs (5) | 2, balanced, mic or line switch selectable on terminal blocks; 2, unbalanced stereo summing inputs on RCA jacks; 1, unbalanced amp in on RCA jack |
| Gain Adjustments (2) | Inputs 1 and 2: Rear-panel single-turn trimmer |
| Maximum Input Level | Mic Inputs: -9 dBu; Balanced line inputs: + 20 dBu; Unbalanced Inputs: + 5 dBV (+11 dBV, one input); (for 1% THD+N at output) |
| Phantom Voltage | 24 Vdc (IEC 61938: 2013), switch-selectable for each mic input |
| Ducking/Muting Actuation | Automatic (Input 1 VOX: rear-panel adjustable signal threshold with LED indicator) or Manual (contact closure to ground) |
| Ducking/Muting Release Delay | Rear-panel single-turn trimmer, adjustable 2 to 6 seconds |
| Ducking/Muting | Switch-selectable for inputs 2, 3 and/or 4, 25 dB ducking attenuation, nominal |
| Effects Loop | Unbalanced RCA jacks (preamp output from main mixer, input to power amplifier) |
| External RDL Module Power Output | 24 Vdc, 100 mA maximum, ground-referenced |
| Noise (line or amplified outputs) | Mic or Balanced line inputs: -70 dB (below compressor threshold at max gain); Unbalanced Inputs: <-75 dB (max gain) |
| THD+N | < 0.5% (1 kHz at compressor threshold, main amp output); < 0.1% (line output, main) |
| CMRR | Mic inputs: > 50 dB (50 Hz to 120 Hz); Balanced line inputs: > 80 dB (50 Hz to 120 Hz, transformer-coupled input) |
| Compressor | Threshold 2 dB below rated output, automatically adjusting attack and release times |
| Frequency Response (mixer) | Mic to line output: ±1.5 dB (40 Hz to 25 kHz); Balanced line input to line output: ±1 dB (20 Hz to 20 kHz); Unbalanced line input to line output: ±0.5 dB (20 Hz to 20 kHz) |
| Frequency Response (amplifiers) | Constant voltage: ±3 dB (50 Hz to 18 kHz); 4/8 Ohm: ±1 dB (50 Hz to 20 kHz) |
| Tone Controls | ±10 dB @ 10 kHz, ±9 dB @ 100 Hz (front-panel) with center detent |
| Audio Outputs (2) | -10 dBV nominal (316 mV), dual mono unbalanced RCA (main mixer; FLAT or EQUALIZED, switch-selectable on rear panel); 0 dBu nominal balanced, terminal block (zone 2 mixer) |
| MOH Output | 0 dBu nominal (775 mV), 600 Ohm transformer-isolated, 16 dB headroom |
| Power Amplifier Outputs (2) | Zone 1 (main): 35 W RMS (25, 70 or 100 V); Zone 2: 4 W (8 Ohms, on detachable terminal block) |
| Indicators (9) | Front-panel: Signal present (4; 1 per input, green), Compressor activity (red), Power (bright=on, dim=standby, blue); Rear-panel: dual-LED VU meter (for inputs 1 and 2, green/red), Ducking/muting threshold (yellow) |
| VCA | Zone 1 (main) master level (with switch-selectable input 1 bypass), 0 to 10 Vdc control, RJ45 (compatible with RDL VCA wall controls) |
| Front-panel controls (7) | Zone 1 (main) mixer level controls (4, inputs 1 through 4), EQ (2, bass and treble), Power (momentary pushbutton, toggle on/standby) |
| Efficiency Standard | “Energy Star® Program Requirements for Audio/Video” Version 2.0 |
| Sleep Mode Power Consumption | < 1 W (amplifier and included power supply) |
| Sleep Mode Delay | 10 minutes to 2 hours (switch-selectable in 10 minute increments) |
| Sleep Mode Disable | Selectable |
| Active Mode Delay | 2 seconds (nominal) after input audio detected |
| Audio Detector Threshold | -80 dBu mic (at max input gain), -55 dBu balanced line (at max input gain), -42 dBV unbalanced |
| Ambient Operating Environment | 32°F (0°C) to 122°F (50°C) Maximum; 68°F (20°C) Recommended |
| Power Supply (included) | 100 to 240 Vac, 50-60 Hz, 50 W; 24 Vdc output to amplifier chassis |
| Dimensions and Weight | Height: 3.5 in.(8.89 cm); Width: 8.5 in.(21.6 cm); Depth: 10 in.(25.4 cm); Weight: 7.3 lb.(3.3 kg) |
Frequently Asked Questions
What output voltages does the HD-MA35UA support?
Zone 1 delivers 35 W RMS at 25 V, 70 V or 100 V. Zone 2 provides 4 W into 8 Ω. For direct 4 Ω or 8 Ω speakers, see the HD-MA35U.
Which remote controls can adjust the volume?
RDL lists the D-RLC10K, D-RLC10KM, DS-RLC10K and DS-RLC10KM. The VCA input also accepts 0 to 10 Vdc or 10 kΩ controls.
Does it support paging and music-on-hold?
Yes. Input 1 supports push-to-talk and VOX ducking, and a 600 Ω transformer-isolated output feeds telephone music-on-hold.
Is the power supply included?
Yes. The included supply accepts 100 to 240 Vac, 50-60 Hz. RDL lists the PS-24V3A (USA) and PS-24V3 (International).
What does it weigh?
RDL lists 7.3 lb (3.3 kg), in a chassis 3.5 in high, 8.5 in wide and 10 in deep.
How can it be mounted?
RDL lists the HD-RA2 and HD-HRA1 rack adapters, HD-WM1 wall mount, HD-ASC1, HD-BP1 and HD-FP1 as HD Series mounting accessories.
What warranty does the HD-MA35UA carry?
This product is covered by a 7-year RDL warranty. For warranty claims, RMAs or support, contact Creation Networks at (888) 230-3661 or sales@creationnetworks.net.
Can Creation Networks help integrate the HD-MA35UA?
Yes. Creation Networks supports system design, equipment selection and installation planning for RDL products nationwide. Call (888) 230-3661 for a quote or technical help.
At Creation Networks, we do everything we can to create an excellent customer experience. This includes fast shipping and easy returns.
- Most in-stock orders placed Monday-Friday ship within 24-48 hours. General restrictions apply; please see our full shipping policy here.
- We offer a 30-day return policy from the delivery date on many products. Product restrictions apply. Restocking fees for the return of open-box items. Please see our full return policy here for more information.
Nationwide Audiovisual Services, Design, Installation & Support
Creation Networks is a trusted nationwide partner for complete audiovisual solutions — delivering expert AV system sales, professional design, programming, installation, and ongoing support to organizations across the United States.
From Microsoft Teams Rooms and enterprise video conferencing to LED video walls, live streaming production, and hybrid collaboration systems, we provide end-to-end AV integration using premium, certified technology from industry leaders including Crestron, Q-SYS, Shure, Extron, and Absen.
Whether you operate a single location or manage facilities nationwide, Creation Networks ensures your AV systems are designed for reliability, scalability, security, and long-term performance — helping your organization communicate more effectively and operate at peak efficiency.
CREATION NETWORKS — A PARTNER YOU CAN TRUST SINCE 2006
