RDL D-RN12 – White Bi-Directional Dante Mic/Line Interface 1x2
RDL D-RN12 – White Bi-Directional Dante Mic/Line Interface 1x2 is backordered and will ship as soon as it is back in stock.
Shipping Availability*
Shipping Availability*
Free Ground Shipping on Most Orders Over $250.00
Looking for the best price or expert advice? Give us a call at 1-888-230-3661 or use the Live Chat below. Buying 1 or 100, you may qualify for greater savings beyond the advertised price.
RDL D-RN12 – White Bi-Directional Dante Mic/Line Interface 1x2
What is the RDL D-RN12?
The RDL D-RN12 is a single-gang Dante or AES67 wall-plate interface with one mic/line input and two balanced outputs, built for conference rooms, classrooms and meeting spaces that run on a Dante network. This white version is powered entirely by PoE and configured in RDL CONSOLE or other network control software, with a Q-SYS plug-in available. 24-bit conversion and RDL's low-noise analog circuitry make it a dependable wall-mount Dante mic/line interface for commercial AV installations.
How does it work?
The front-panel XLR input converts a microphone or line source to one network transmit channel, while two received network channels feed a front-panel mic/line XLR output and two rear-panel line outputs on a detachable wiring block. Input gain is set in software, with 35 dB, 42 dB or 59 dB for dynamic or condenser microphones and unity or 12 dB for line sources. P48 phantom power can be enabled in software when the input is set to mic level. One rear-panel output carries the same channel as the front XLR at line level, and the other carries a separate network channel for a local amplifier. Each output provides +4 dBu balanced for a network level of -18 dBFS and has a software-controlled attenuator adjustable in 1 dB steps to 63 dB, then OFF. The module supports sample rates of 44.1, 48, 88.2 and 96 kHz at 24 bits. It fits a standard US single-gang electrical box, or mounts in EU/UK square back boxes with 60 mm screw centers using the RDL EP-1 adaptor. Two XLR outputs can be added next to the plate using an RDL D-D2 fitted with two AMS-XLRMA jacks, available separately. Green front-panel LEDs confirm valid PoE power and Dante network sync, so installers can check status at the wall. The steel chassis carries a Decora-style front plate, and the unit is engineered and manufactured in the U.S.A. for continuous duty. For surface mounting where no in-wall box exists, the RDL SMB-1W surface-mount box is a matching option.
What are the key features?
- Mic/line XLR input — Software-selected gain of 35, 42 or 59 dB for mics and unity or 12 dB for line sources matches nearly any source.
- Software P48 phantom — Phantom power for condenser microphones is enabled from the control software when the input is set to mic level.
- Front and rear outputs — A front-panel XLR output is selectable for mic or line level, and a second line output sits on the rear wiring block.
- Dante or AES67 — The interface joins Dante networks and AES67 systems at 44.1, 48, 88.2 or 96 kHz with 24-bit conversion.
- 1 dB step output attenuators — Each output level is set in software in 1 dB steps down to 63 dB of attenuation, then OFF.
- Single-cable PoE power — A PoE Class 0, IEEE 802.3af switch port powers the unit, so no local power supply is required.
- Software and Q-SYS control — Setup runs in RDL CONSOLE or other network control software, and a Q-SYS plug-in is available.
- RDL remote compatible — The module works with RDL network remote controls for user level adjustment.
- Single-gang wall mounting — The compact 1.80 x 4.11 x 2.09 in body fits a standard US single-gang electrical box.
Where is it typically used?
- Conference room
- Boardroom
- Training room
- Multi-purpose room
- House of worship
- Auditorium
- Government space
Technical Specifications
| Network Connector | RJ45 with Link and Speed indicators |
| Digital Audio Ethernet Protocol | Dante |
| Transmission Rate | 100 Mbps |
| Sample Rates Supported | 44.1 kHz, 48 kHz (default), 88.2 kHz, 96 kHz |
| Bit Depth Supported | 24 bits |
| Audio Operating Level | -18 dBFS = +4 dBu |
| Reference Level | 0 dBFS = +22 dBu |
| Mic/Line Input to Network Interface | |
| Input | XLR (female) |
| Gain | Mic: 35 dB (LOW), 42 dB (MED), 59 dB (HIGH); Line: Unity (NORM), 12 dB (HIGH) |
| Input Level (for +4 dBu/-18 dBFS) | Mic: -31 dBu (LOW), -38 dBu (MED), -55 dBu (HIGH); Line: +4 dBu (LOW), -8 dBu (HIGH |
| Input Level (maximum) | Mic: -14 dBu (LOW), -21 dBu (MED), -38 dBu (HIGH); Line: +23 dBu (LOW), +10 dBu (HIGH) |
| Input Impedance | > 1.2 kΩ |
| Phantom Power | P48, software-selectable |
| Standard for Phantom | IEC 61938: 2013 |
| Selectors per input (2) | Phantom, Gain, software-selectable |
| Frequency Response | 20 Hz to 20 kHz (± 0.5 dB) |
| Equivalent Input Noise | < -128 dBu (59 dB gain); < -130 dBu A-Weighted |
| Noise below -18 dBFS (20 to 20 kHz) | Mic: < -88 dB (LOW), < -82 dB (MED), < -68 dB (HIGH); Line: < -88 dB (NORM), < -88 dB (HIGH) |
| THD+N | < 0.1% (20 Hz to 20 kHz, +4 dBu/-18 dBFS) |
| CMRR | > 65 dB (50 Hz to 120 Hz) |
| Crosstalk | Below Noise Floor (20 Hz to 20 kHz at operating level, any input to any input, max. mic gain) |
| Network to Mic/Line Outputs | |
| Outputs (2) | Balanced, XLR and detachable wiring block; Balanced, detachable wiring block |
| Output Level (operating) | +4 dBu (nominal) balanced |
| Output Level (maximum) | +22 dBu balanced |
| Output Attenuator | Software-controlled, 0 to -63 dB and OFF (analog output per received network channel) |
| Output Impedance | 150 Ω balanced |
| Frequency Response | Mic: 20 Hz to 20 kHz (± 0.5 dB); Line: 20 Hz to 20 kHz (± 0.5 dB) |
| THD+N | < 0.1% |
| THD | < 0.01% (1 kHz) |
| Noise | < -80 dB (below +4 dBu); < -100 dB (below +22 dBu) |
| Crosstalk | Below Noise Floor (20 Hz to 20 kHz at operating level, output to output) |
| Headroom above +4 dBu | > 18 dB |
| Indicators (4) | Ethernet Link and Speed (2, rear panel); Sync and Power (2, front panel) |
| Ambient Operating Environment | 32° F to 122° F (0° C to 50° C) |
| Power Requirement | PoE Class 0, IEEE 802.3af |
| Dimensions | 1.80” (4.57 cm) W; 4.11” (10.44 cm) H; 2.09” (5.31 cm) D |
| Shipping Weight | 0.695 lbs. (0.315 kg) |
Frequently Asked Questions
Does the D-RN12 need a separate power supply?
No. It is powered by PoE (Class 0, IEEE 802.3af) from the network switch port that carries its Dante audio.
How is it configured?
Input gain, phantom power and output attenuation are set in RDL CONSOLE or other network control software. RDL also offers a Q-SYS plug-in for configuring it inside a Q-SYS design.
Is it compatible with AES67 systems?
Yes. RDL specifies the D-RN12 as a Dante or AES67 network interface.
What back box does it fit?
The D-RN12 fits a standard US single-gang electrical box, or mounts in EU/UK square back boxes with 60 mm screw centers using the RDL EP-1 adaptor.
Does it provide phantom power for condenser microphones?
Yes. P48 phantom power is software-selectable on the XLR input when it is set to mic level.
What warranty does the D-RN12 carry?
This product is covered by a 7-year RDL warranty. For warranty claims, RMAs or support, contact Creation Networks at (888) 230-3661 or sales@creationnetworks.net.
Can Creation Networks help design and commission the system?
Yes. Our team handles networked audio design, equipment selection, installation and commissioning for commercial projects nationwide. Call (888) 230-3661 to discuss your project.
At Creation Networks, we do everything we can to create an excellent customer experience. This includes fast shipping and easy returns.
- Most in-stock orders placed Monday-Friday ship within 24-48 hours. General restrictions apply; please see our full shipping policy here.
- We offer a 30-day return policy from the delivery date on many products. Product restrictions apply. Restocking fees for the return of open-box items. Please see our full return policy here for more information.
Nationwide Audiovisual Services, Design, Installation & Support
Creation Networks is a trusted nationwide partner for complete audiovisual solutions — delivering expert AV system sales, professional design, programming, installation, and ongoing support to organizations across the United States.
From Microsoft Teams Rooms and enterprise video conferencing to LED video walls, live streaming production, and hybrid collaboration systems, we provide end-to-end AV integration using premium, certified technology from industry leaders including Crestron, Q-SYS, Shure, Extron, and Absen.
Whether you operate a single location or manage facilities nationwide, Creation Networks ensures your AV systems are designed for reliability, scalability, security, and long-term performance — helping your organization communicate more effectively and operate at peak efficiency.
CREATION NETWORKS — A PARTNER YOU CAN TRUST SINCE 2006
