Sound Control Technologies RC4-E4P – HDMI Camera Extension for Poly EagleEye IV

Product Overview

The Sound Control Technologies RC4-E4P is a commercial-grade HDMI camera extension kit engineered for Poly RealPresence Group Series codecs (300, 500, G7500) paired with the Poly EagleEye IV camera. Using SCTLink™ technology, it delivers HDMI video, RS-232 Visca control, and 12V DC camera power over a single CAT cable run up to 100 meters—eliminating point-to-point HDMI distance constraints in conference room and boardroom deployments. No programming is required; the system is plug-and-play after cabling. This base kit includes the RC4-CE camera module, RC4-HE head-end/codec module, all required interconnect cables, and a WPS-12 power supply.

Product Description

The RC4-E4P addresses a common AV integration challenge: positioning a PTZ camera away from the codec in a fixed installation without running multiple signal cables. A single CAT cable carries all three signal types—video, RS-232 control, and 12V power—up to 100 meters between the RC4-CE at the camera and the RC4-HE at the codec rack. The RC4-HE interfaces directly with the Poly G7500 or RealPresence Group codec via the included HDCI cables, preserving native Visca PTZ control from the codec without any external control processor. The RC4-CE attaches near the camera and provides clean 12V power derived from the included WPS-12 supply, so no separate camera power run is needed. Cables included are purpose-built for this camera-codec combination: RCC-C030 (1’ Mini-HDCI camera cable) and RCC-H030 (3’ HDCI head-end cable), ensuring correct connector fit without adapters. The system is compatible with Poly RealPresence Group 300, 500, and 7500 codecs using the EagleEye IV camera. For integrators who want to add BYOD soft codec capability to an existing RC4 installation, the RC-SDA4+ media bridge is a compatible add-on available separately.

Key Features

• Single-CAT Extension up to 100m — Carries HDMI video, RS-232 Visca PTZ control, and 12V DC camera power over one CAT cable, reducing conduit fill and installation time.
• No Programming Required — Plug-and-play operation with Poly RealPresence Group codecs; RS-232 Visca control passes transparently without external control processors.
• Purpose-Built Cable Set — Includes RCC-C030 Mini-HDCI camera cable and RCC-H030 HDCI head-end cable, pre-matched to Poly EagleEye IV and G7500/Group codec connectors.
• Integrated 12V Camera Power — WPS-12 power supply and RC4-CE deliver regulated 12V DC to the camera; no separate power run to the camera location.
• Modular Two-Module Design — RC4-CE (camera end) and RC4-HE (head end) modules allow replacement of individual units if damaged without replacing the entire kit.
• Compatible with RC-SDA4+ Media Bridge — Existing RC4 installations can be upgraded for BYOD soft codec functionality by adding the RC-SDA4+ (sold separately).
• Commercial-Grade Construction — Designed for permanent installation in conference rooms, boardrooms, and government spaces; USA/Taiwan manufactured.

Typical Applications

• Boardroom with Poly RealPresence Group 500 or G7500 codec and ceiling- or wall-mounted EagleEye IV PTZ camera
• Conference room requiring camera placement beyond HDMI cable distance limits
• Government or corporate meeting space with dedicated videoconferencing infrastructure
• Multi-purpose room with a fixed Poly codec and relocatable camera position
• Training room with Poly codec where camera must be mounted at distance from equipment rack

Technical Specifications

Frequently Asked Questions

What Poly codecs and cameras does the RC4-E4P support?

The RC4-E4P is designed for use with the Poly RealPresence Group 300, Group 500, and G7500 codecs paired with the Poly EagleEye IV camera. It is not intended for use with other Poly camera models such as the EagleEye Cube, EagleEye Producer, or EagleEye Director; separate RC4 variants exist for those cameras.

What cable type and maximum run length are supported?

The RC4-E4P extends over a single CAT cable (CAT5e or better recommended) up to 100 meters (328 feet). The CAT cable is not included in the kit and must be supplied by the installer. The run must be a continuous, unpatched cable between the RC4-CE and RC4-HE modules.

Does the kit require any programming or control system integration?

No programming is required for basic operation. The RC4-HE connects directly to the Poly codec, and RS-232 Visca PTZ control passes transparently from the codec through the extension to the camera. A control processor (such as Crestron or AMX) is not required, though the system is compatible with third-party control systems if present.

Can I add BYOD or soft codec capability to this installation later?

Yes. SCT offers the RC-SDA4+ media bridge, which pairs with existing RC4 extension kits to add BYOD soft codec functionality (USB video and audio from a laptop). The RC-SDA4+ replaces the RC4-HE and connects to the existing RC4-CE, so the camera end cabling does not need to change.

What is included in the -K and -S project pack variants?

The RC4-E4P-K adds an RCM-EE4 on-wall camera mount to the base kit. The RC4-E4P-S adds an RC-RK2 1RU rack shelf for mounting the head-end module. The RC4-E4P-KS (if required) includes both the mount and the rack shelf.

What warranty and support terms apply?

Contact Creation Networks for current Sound Control Technologies warranty terms and support options. Our team can also assist with pre-sales system design and post-installation troubleshooting.