Planar Remote Power Supply – 48VDC TAA Compliant Module

Product Overview

The Planar Remote Power Supply (RPS) is a rack- or floor-mountable power module that delivers regulated DC power to compatible Planar LED video wall systems from a remote location. This configuration accepts a 100-240Vac input voltage range and includes one Remote Power Supply Module rated for 1x 48VDC/1150W output plus a 1x 48V/150W auxiliary output. The unit is TAA compliant, supporting procurement requirements for government and regulated installations. Remote power placement helps reduce heat and cabling behind the display surface.

Product Description

The Planar Remote Power Supply is designed for AV integrators who need to relocate power conversion away from the LED display itself, a common requirement in installations where rear access is limited or where heat and noise behind the wall must be minimized. This module accepts a wide 100-240Vac input range, making it suitable for varied facility power, and provides a primary 48VDC/1150W rail to drive the connected LED cabinets along with a separate 48V/150W auxiliary output for supporting electronics. Locating the supply remotely shortens the high-current run at the display and consolidates power components into a serviceable equipment location. TAA compliance makes the RPS appropriate for federal, defense, and other procurement environments that require Trade Agreements Act conformance. Because it is a power accessory rather than a display, the RPS is specified to match the load and architecture of the LED system it supports, and the number of modules required depends on total cabinet count and configuration. Integrators planning a Planar LED deployment can review compatible displays and accessories on the Planar collection at Creation Networks. Because compatible systems, load limits, and module counts vary by project, contact Creation Networks to confirm exact specifications for your configuration.

Key Features

• Wide 100-240Vac input — Accepts a broad input voltage range for varied facility power conditions.
• 48VDC/1150W primary output — One Remote Power Supply Module delivers regulated DC power to connected LED cabinets.
• 48V/150W auxiliary output — Separate rail supports auxiliary electronics in the system.
• Remote placement — Relocates power conversion away from the display to reduce heat and cabling behind the wall.
• TAA compliant — Meets Trade Agreements Act requirements for government and regulated procurement.

Typical Applications

• Government, defense, and TAA-required LED installations
• Video walls with limited rear access requiring remote power
• Installations where heat and noise behind the display must be minimized
• Centralized equipment-room power for tiled LED systems

Technical Specifications

Frequently Asked Questions

What does the Planar Remote Power Supply do?
It converts facility AC power to regulated 48VDC for compatible Planar LED systems from a remote location, reducing heat and cabling behind the display.

What outputs does this module provide?
It provides a 48VDC/1150W primary output plus a 48V/150W auxiliary output from one Remote Power Supply Module.

What input voltage does it accept?
It accepts a 100-240Vac input voltage range.

Is this unit TAA compliant?
Yes. It is TAA compliant for government, defense, and regulated procurement requirements.

How many modules will my installation need?
The number of modules depends on total cabinet count and load. Contact Creation Networks to confirm the configuration for your system.