Peerless-AV TVFT690 – TruVue Flat/Tilt Wall Mount 65-90"

What is the Peerless-AV TVFT690 TruVue flat/tilt wall mount?

The Peerless-AV TVFT690 is a low-profile flat/tilt wall mount built for large-format 65" to 90" commercial displays. As a flat and tilt TV wall mount for large displays, it sits just 1.27" off the wall and provides +7° of tilt for viewing-angle correction, making it well suited to boardrooms, all-hands spaces, and digital signage installations where a large screen needs a clean, near-flush mounting profile. It supports up to 132 lb and VESA patterns up to 800 x 400mm, covering the panel sizes and mounting hole patterns common on commercial 65"-90" displays. Integrators specifying a large-format low-profile tv mount for a lobby, training room, or auditorium screen will find the TVFT690 sized correctly for that display class.

What does the Peerless-AV TVFT690 do?

The TVFT690 holds a large-format display flush and level against the wall while still allowing +7° of tilt adjustment, which is enough to correct glare or viewing angle without the mount's bulk pushing the display far off the wall surface. Its universal VESA plate supports patterns up to 800 x 400mm, so it fits the wide range of hole patterns manufacturers use on 65" and larger commercial panels without requiring a specialty bracket. Side-to-side adjustment after installation lets a technician fine-tune horizontal position to align with existing wall graphics, signage frames, or adjacent equipment without redrilling. The low-profile flat/tilt design is a common choice for boardrooms and training rooms where the display needs to read as part of the wall rather than as a projecting fixture, and for digital signage deployments where flush mounting protects against accidental contact in high-traffic areas. Because the mount is rated well above the weight of most 65"-90" commercial panels, it gives integrators margin for heavier interactive or touch-enabled displays in the same size class. The TVFT690 installs with standard wall anchors and is a straightforward fit for both new AV builds and display refresh projects replacing older large-format mounts.

Key Features

• Low-profile flat/tilt design — Positions the display just 1.27" from the wall for a near-flush commercial finish.
• +7° tilt adjustment — Corrects glare and viewing angle without adding significant depth to the mount.
• 132 lb weight capacity — Rated for large-format 65" to 90" commercial and consumer-grade panels.
• VESA up to 800 x 400mm — Matches the mounting hole patterns used across most large commercial displays.
• Post-install side-to-side adjustment — Fine-tunes horizontal alignment after the display is on the wall.
• Compact hardware footprint — Simplifies installation for boardroom, signage, and auditorium display projects.

Technical Specifications