Peerless-AV RF4X4 – Flat Wall Mount for 32-70" Displays

What is the Peerless-AV RF4X4 flat wall mount?

The Peerless-AV RF4X4 is a fixed, low-profile flat wall mount sized for 32" to 70" commercial displays. As a flat wall mount for mid-size commercial displays, it holds the screen tight to the wall with no tilt or articulation, which is the right configuration for digital signage, video wall segments, and conference room displays that are set once during commissioning and don't need field adjustment afterward. The fixed design keeps the mounting hardware simple and low profile, making it a good fit for jobs where multiple displays are going up on the same wall and need to line up flush and level. Integrators specifying a commercial-grade flat mount for a 32" to 70" display will find the RF4X4 sized to match that panel range.

What does the Peerless-AV RF4X4 do?

The RF4X4 secures a display in a fixed, flush position against the wall, which suits conference rooms, huddle rooms, and digital signage installations where the display doesn't need to tilt or swivel after it's hung. Because it has no moving parts, the RF4X4 sits closer to the wall than a tilt or articulating mount in the same size class, which is often the preferred look for boardrooms and multi-purpose rooms where a clean, flush finish matters. The fixed design also makes it easier to keep multiple displays aligned in a row, since there's no tilt mechanism that needs to be matched between units on a video wall or multi-display signage run. This mount type is a common specification for training rooms and all-hands spaces where a display goes up at a fixed height and angle and stays there for the life of the installation. Integrators should confirm the specific VESA pattern and load rating on the display being installed against the mount's published capacity before finalizing a bill of materials.

Key Features

• Fixed, flush-mount design — Holds mid-size commercial displays tight to the wall for a clean, finished look.
• Sized for 32" to 70" displays — Covers the panel range common in conference rooms and signage installs.
• Low-profile hardware — Minimizes the gap between display and wall.
• Simplified multi-display alignment — No tilt mechanism to match across displays hung in a row.
• Commercial-grade construction — Built for fixed-position deployment in conference rooms and signage builds.

Technical Specifications

Weight capacity and full VESA pattern data for the RF4X4 were not published on Peerless-AV's current spec pages at the time of writing; contact Creation Networks for the current spec sheet to confirm compatibility with a specific display before ordering.