Peerless-AV RA6X4 – Full Motion Wall Mount for 43-100"

What is the Peerless-AV RA6X4?

The Peerless-AV RA6X4 is a heavy-duty full-motion wall mount built for 43" to 100" displays, giving AV integrators tilt, swivel, and extension in one mount for commercial installs where the display needs to be viewable from multiple angles or positions in the room. It's the larger-capacity version of Peerless-AV's A6X4 full-motion mount line, sized for large conference room, training room, and digital signage displays rather than standard 50-75" panels. Full-motion wall mounts like the RA6X4 are the standard spec whenever a display can't sit at a fixed, perpendicular angle to the wall — corner installations, angled sightlines, and rooms where the viewing position changes throughout the day.

What does the Peerless-AV RA6X4 do?

The RA6X4 combines tilt, swivel, and extend/retract motion in a single wall-mount arm, letting a 43" to 100" display pull away from the wall, swing left or right, and tilt up or down to match whoever's viewing it and from where. In a conference room, that means the display can angle toward either end of the table without requiring the room to be laid out around a single fixed sightline. In a corner installation or angled retail storefront, the extend-and-swivel motion lets the display face into the room properly instead of sitting flush and off-angle against the wall it's mounted to. The mount's extension range brings the display out from a near-flush position for a low-profile look, then extends further out when a wider swivel angle is needed for cable access or repositioning. Construction on the full-motion RA/A6X4 line uses a scratch-resistant fused-epoxy finish over steel arm and wall-plate components, built to Peerless-AV's standard commercial-grade specification rather than a lighter-duty consumer full-motion arm. Installation follows the brand's Hook-and-Hang system, letting a single technician hang the display on the mount before final leveling and securing — a meaningful advantage on the larger end of this mount's 100" capacity where a two-person lift at every step slows down a job. For AV integrators speccing displays in corner installs, angled meeting rooms, or any application where a fixed tilt mount won't deliver the sightline the room needs, the RA6X4 gives the full range of motion in one mount rated for large-format commercial panels.

Key Features

• Tilt, swivel, and extend/retract motion — combines three axes of adjustment in one arm for angled sightlines and corner installations.
• 43"-100" display range — covers large conference room, training room, and digital signage panels.
• Scratch-resistant fused-epoxy steel construction — built to commercial-grade specification for daily-use display arms.
• Hook-and-Hang™ installation — lets a single technician hang the display before final leveling and securing.
• Low-profile retracted position — sits close to the wall when not extended, for a clean look between service or repositioning needs.

Technical Specifications