Peerless-AV SP840 – Pull-Out Pivot Wall Mount with Tilt for 32"-55" Displays

SP840 – Peerless-AV Pull-Out Pivot Wall Mount with Tilt for 32" to 55" Displays

The Peerless-AV SP840 is a pull-out pivot wall mount with tilt for 32- to 55-inch flat panel displays, combining adjustable extension, swivel, and tilt in a single, low-profile unit for on-wall and recessed commercial AV applications.

Product Description

The SP840 is engineered for installations where a flat panel display needs to pull away from the wall and pivot to serve viewers at angles beyond the fixed-mount range. This includes hotel room televisions that need to be seen from a bed and a seating area simultaneously, conference room displays that serve both in-room participants and a door-side standing position, and furniture-integrated installations where the display retracts flush when not in use.

Built-in swivel of up to plus or minus 30 degrees from center allows the display to be directed toward the intended viewing position without adjusting the wall attachment, making this mount appropriate for locations where the optimal viewing angle is not directly in front of the wall. The I-shaped adaptor plate is designed to clear the connections on the back of the display, preserving access to HDMI, USB, and power ports after the display is mounted without requiring the display to be removed for cable changes.

A lock-out screw prevents the arm from extending when the display should remain in the closed position, and an adjustable tensioned detent controls the force required to pull the display out from closed, preventing accidental deployment in public environments. Supports displays up to 60 lbs on VESA patterns from 200 x 100mm to 400 x 400mm. Available from Creation Networks at creationnetworks.net.

Key Features

• Pull-out pivot design — Extends the display away from the wall and pivots left or right to direct content toward the desired viewing position, covering angles not achievable with a fixed or tilt-only mount.
• Built-in swivel up to ±30 degrees — Provides 60 degrees of total horizontal sweep from the mounted position, accommodating rooms where the viewing area spans multiple seating zones.
• I-shaped adaptor plate — Clears the rear connection panel of the display, preserving access to input ports after installation without requiring the display to be dismounted for cable management.
• Security screws — Prevent unauthorized removal or tampering with the mount hardware, appropriate for hospitality, healthcare, and other environments with high public access.
• Lock-out screw for closed-position security — Prevents the arm from extending when the display is intended to remain at the wall, useful in hospitality and retail environments where accidental extension is a concern.
• Adjustable tensioned detent — Controls the resistance required to pull the display from the closed position, allowing installers to calibrate the mount behavior to the specific use case.
• VESA patterns from 200x100mm to 400x400mm — Covers the standard mounting patterns used by 32- to 55-inch commercial flat panel displays.
• Dual or single stud mounting — Mounts to dual 16-inch studs or a single stud, accommodating standard wood-frame wall construction without blocking or additional structural reinforcement.

Typical Applications

The SP840 is a practical choice for hotel room televisions, patient room displays in healthcare facilities, conference room screens that need to serve multiple viewing zones, and furniture-integrated AV installations where the display needs to retract to a flush or near-flush position when not in active use. Its combination of pull-out reach and swivel range makes it appropriate wherever a fixed wall mount cannot adequately serve the room geometry.

Technical Specifications

Frequently Asked Questions

Can the SP840 be used in a recessed or in-furniture installation?

Yes. The SP840 is specifically designed for on-wall and recessed/in-furniture applications. The pull-out mechanism allows the display to be extended for viewing and retracted to a flush or near-flush position when not in use, making it well suited to entertainment units, cabinetry, and similar installations.

Does the SP840 allow access to the rear ports of the display after installation?

Yes. The I-shaped adaptor plate is designed to avoid blocking the connection panel on the back of the display. In most configurations, input ports remain accessible without removing the display from the mount.

How do I prevent guests or users from accidentally extending the display arm?

The SP840 includes a lock-out screw that can be tightened to prevent the arm from extending from the closed position. The adjustable tensioned detent can also be set to increase the extension force required, adding a secondary deterrent to accidental deployment.