Peerless-AV PJR125-W – Heavy Duty Projector Mount up to 125 lbs (White)

PJR125-W – Peerless-AV Heavy Duty Universal Projector Mount (White)

The Peerless-AV PJR125-W is a heavy duty universal projector mount engineered to support laser and large-format projectors weighing up to 125 lbs in demanding commercial AV environments.

Product Description

The PJR125-W addresses one of the most common challenges in commercial projection: safely and accurately positioning a heavy laser projector without a lengthy, two-person installation process. The Hook-and-Hang design provides a large, forgiving landing area that allows a single installer to seat the projector on the mount before making final adjustments, reducing the physical risk associated with maneuvering heavy units overhead.

Once the projector is in place, independent tilt, roll, and swivel adjustments allow precise image alignment. Each axis has a dedicated locking screw so the projector can be locked at the exact position that produces a square, centered image, with no drift over time. The pre-assembled design means the mount arrives ready to install with minimal on-site setup.

The universal adaptor plate extends up to 25.5 inches to accommodate projectors with non-standard mounting patterns, and six mounting legs are included (four pre-installed) to support projectors with more than four mounting holes. Integrated cable management routes cables through the mount body, producing a clean overhead installation consistent with finished AV environments. Available from Creation Networks at creationnetworks.net.

Key Features

• Hook-and-Hang installation — A large landing area allows a single installer to safely hang a heavy projector on the mount before completing the final adjustment and lock sequence.
• 125 lb weight capacity — Rated for laser and large-format commercial projectors that exceed the capacity of standard mounting hardware.
• Lockable tilt, roll, and swivel — Each axis adjusts independently and locks with a dedicated screw, preventing image shift after alignment is complete.
• Pre-assembled design — Reduces on-site assembly time, allowing AV installers to spend more time on alignment and commissioning than on hardware setup.
• Universal adaptor plate — Extends to a 25.5-inch (648mm) mounting pattern to accommodate the majority of commercial projector models without additional adaptor hardware.
• Six mounting legs included — Four legs come pre-installed; two additional legs are included to support projectors with non-standard mounting hole configurations.
• Integrated cable management — Cables route through the mount, keeping power and signal connections concealed for a finished overhead installation appearance.
• White finish — Designed to blend with white or light-colored ceilings typical in corporate conference rooms and educational facilities.

Typical Applications

The PJR125-W is the correct choice for fixed installations using heavy laser projectors in corporate boardrooms, university lecture halls, large conference rooms, and auditoriums where ceiling-mount stability and precise image alignment are non-negotiable. Its white finish and cable management provisions make it appropriate for finished spaces where the mounting hardware is visible to the audience.

Technical Specifications

Frequently Asked Questions

Can the PJR125-W support projectors with non-standard mounting hole patterns?

Yes. The universal adaptor plate extends to a 25.5-inch (648mm) mounting pattern, and six mounting legs are included to accommodate projectors with more than four mounting holes. This covers the vast majority of commercial projector models.

Is the PJR125-W suitable for a single-installer deployment?

The Hook-and-Hang design with its large landing area is specifically engineered to allow one person to safely seat a heavy projector onto the mount before completing adjustment and locking, reducing the need for a two-person crew during the installation phase.

What is the difference between the PJR125-W and a standard projector mount?

The PJR125-W is rated to 125 lbs and includes full tilt, roll, and swivel adjustment with independent locking on each axis, making it appropriate for heavy laser projectors in permanent commercial installations where a standard mount would be undersized or lack the alignment precision required.