Middle Atlantic FWD-DWR-RR35 – Forward 35U Rear Rack Rail Pair, DWR

Product Overview

The Middle Atlantic FWD-DWR-RR35 is a pair of Forward Series 35U rear rack rails designed for DWR Series pivoting wall racks. The rails use a square-hole pattern that lets Forward panels, vents, and cable management accessories click into place without rack screws. Integrated lacing points along the inside of each rail give installers dedicated tie-off locations for interconnect cabling. This 35-space kit completes the rear mounting plane of a 35U DWR enclosure.

Product Description

Rear rack rails are a frequent bottleneck in wall rack installations: every blank, vent, and lacer strip traditionally requires a bag of rack screws and a driver. The FWD-DWR-RR35 rear rack rail kit removes that step. Each rail in the pair carries the Forward Series square-hole pattern, so compatible Forward panels, vents, and cable management accessories snap in tool-free and seat securely without any hardware. For integrators outfitting a 35U DWR pivoting wall rack, that translates directly into shorter trim-out time at the back of the enclosure. The inside face of each rail doubles as a cable lacing surface, providing consistent anchor points for dressing interconnections vertically through the rack instead of improvising tie-offs on the frame. Combined with tool-free Forward cable management accessories, the rails support a fast, repeatable cable routing workflow from the first connection to the last. The kit installs as a matched pair sized for 35-space DWR enclosures. If your project uses a different enclosure height, Middle Atlantic offers the same Forward rear rail design in additional sizes, including the FWD-DWR-RR40 and FWD-DWR-RR46. For racks, panels, and accessories that round out the installation, browse the full Middle Atlantic collection at Creation Networks.

Key Features

• 35U Rear Rail Pair — Two matched Forward Series rack rails sized for 35-space DWR Series wall racks.
• Tool-Free Square-Hole Mounting — Forward panels, vents, and cable management accessories click in without rack screws.
• Integrated Cable Lacing — Inside rail surfaces provide dedicated lacing points for dressing interconnections without improvised tie-offs.
• Faster Trim-Out — Eliminates hardware handling at the rear mounting plane to cut installation time.
• Forward Accessory Compatibility — Works with the tool-free Forward cable management line for a consistent routing workflow.
• Matched to DWR Enclosures — Purpose-built rear rail kit for Middle Atlantic DWR Series pivoting wall racks.

Technical Specifications