Meyer Sound USW-112XP/WP 1200W 12-inch Powered Subwoofer, Weather Proctection - 09.298.201.02

Product Overview

The Meyer Sound USW-112XP/WP is a weather-protected IntelligentDC 1x12" compact narrow subwoofer that delivers low-frequency reinforcement to covered outdoor and semi-exposed installed sound systems while drawing both DC power and balanced audio over a single cable. Rated IP54 with the rain hood installed, this externally powered model is the ideal low-frequency companion to the ULTRA-X20XP and is suited to houses of worship, outdoor commercial AV systems, and architectural installs requiring conduit-free, low-voltage distribution.

Product Description

The USW-112XP/WP houses an open-loop Class D power amplifier rated at 600 W peak with onboard correction filters for phase and frequency response and driver protection. With IntelligentDC technology, it receives 48 V DC power and balanced audio from a single Phoenix 5-pin connector fed by a Meyer Sound MPS IntelligentDC power supply (MPS-482HP or MPS-488HP required), eliminating wiring conduits while preserving the advantages of self-powered systems. Its compact rectangular enclosure and slanted connector panel allow flush wall mounting at only 12 inches of depth including connectors, and the bass-reflex cabinet uses a low-velocity port based on the USW-210P design for high efficiency and low port distortion. For an AC-powered configuration, compare the USW-112P, and browse the full Meyer Sound collection at Creation Networks.

Key Features

• IntelligentDC power and audio — Receives 48 V DC power and balanced audio over a single Phoenix 5-pin connector from a Meyer Sound MPS power supply.
• Weather protection (IP54) — Rated IP54 with the rain hood properly installed for covered outdoor and semi-exposed environments.
• Conduit-free distribution — Composite cabling carries power and audio up to 150 feet with about 1 dB of loss using 18 AWG power wiring.
• Single 12-inch driver — A proprietary high-excursion 12-inch cone driver delivers high power-to-size low-frequency output.
• Class D amplification — An open-loop Class D amplifier delivers 600 W peak with onboard correction and driver protection.
• Low-profile installation depth — The slanted connector panel enables flush wall mounting at only 12 inches including connectors.
• Versatile rigging — Two M8 threaded points plus a 35 mm pole mount with M20 thread accept the optional U-bracket for wall, ceiling, or truss mounting.

Typical Applications

• House of worship — Provides discreet, conduit-free low-frequency reinforcement for sanctuaries and covered exterior areas.
• Auditorium — Reinforces low end for speech and music in performance and assembly spaces, including exposed structures.
• Multi-purpose room — Supports flexible AV program material with low-voltage distribution.
• Government space — Delivers durable, low-voltage low-frequency output for covered exterior briefing and assembly areas.

Technical Specifications

Specifications sourced from Meyer Sound. Subject to change without notice.

Frequently Asked Questions

How is the USW-112XP/WP powered? It uses IntelligentDC technology, receiving 48 V DC power and balanced audio over a single Phoenix 5-pin connector from a Meyer Sound MPS-482HP or MPS-488HP IntelligentDC power supply, which is required.

What is the weather rating? The weather-protected version is rated IP54 with the rain hood properly installed for covered outdoor and semi-exposed locations.

How far can the cable run? Composite multi-conductor cable can deliver power and audio up to 150 feet with approximately 1 dB of peak SPL loss using 18 AWG power wiring; longer runs are possible with heavier gauge wire.

What loudspeakers does it pair with? It is designed as the low-frequency companion to the ULTRA-X20XP and complements the UP-4slim and UPM-family loudspeakers.

Is this subwoofer covered by a warranty? Yes, it is covered under Meyer Sound's standard product warranty. For details, please contact Creation Networks.