Meyer Sound MM-10XP 440W Powered Subwoofer with 10" Transducer, EN-3 - Black - 09.199.010.01

Product Overview

The Meyer Sound MM-10XP is an externally powered IntelligentDC 10" miniature subwoofer that delivers discreet low-frequency extension to compact installed sound systems while drawing both DC power and balanced audio over a single low-voltage cable. This EN-3 connector model in black is suited to houses of worship, conference and huddle rooms, retail and hospitality spaces, and multi-purpose AV systems where conduit-free, low-voltage distribution and visual discretion are priorities. It is also UL 2043 rated for use in air-handling spaces.

Product Description

The MM-10XP houses a Class D power amplifier rated at 440 W peak with onboard signal processing and driver protection. With IntelligentDC technology, it receives 48 V DC power and balanced audio from a single EN3 5-pin connector fed by a Meyer Sound MPS IntelligentDC power supply, eliminating wiring conduits while preserving the advantages of self-powered systems. An input polarity switch reverses audio polarity between pins 4 and 5, and a status LED reports loudspeaker condition. Among the MM-10 family, the MM-10XP is the lightest at 26.7 lb and is the only model rated suitable for air-handling (plenum) spaces. For an AC-powered configuration, compare the MM-10AC, and browse the full Meyer Sound collection at Creation Networks.

Key Features

• IntelligentDC power and audio — Receives 48 V DC power and balanced audio over a single EN3 5-pin connector from a Meyer Sound MPS power supply.
• Plenum-rated — UL 2043 tested and suitable for use in air-handling spaces, unique among the MM-10 family.
• Single 10-inch driver — One 10-inch cone driver with a 2-inch voice coil delivers low-frequency output in a miniature cabinet.
• Class D amplification — An onboard Class D amplifier delivers 440 W peak with driver protection.
• Input polarity switch — Reverses audio input polarity between pins 4 and 5 for system alignment.
• Lightweight cabinet — At 26.7 lb, it is the lightest MM-10 model for easier overhead installation.
• Flexible rigging — Top and side nut plates with 3/8-inch or M10 threads accept the optional MUB-MM10 U-bracket.

Typical Applications

• House of worship — Adds discreet, conduit-free low-frequency support to compact sanctuary sound systems.
• Huddle room — Provides low-profile, low-voltage bass for small collaboration spaces.
• Conference room — Extends bass for program audio with single-cable IntelligentDC distribution.
• Multi-purpose room — Supports flexible small-format AV systems, including plenum ceiling installs.
• Training room — Supplies controlled bass extension for instructional AV playback.

Technical Specifications

Specifications sourced from Meyer Sound. Subject to change without notice.

Frequently Asked Questions

How is the MM-10XP powered? It uses IntelligentDC technology, receiving 48 V DC power and balanced audio over a single EN3 5-pin connector from a Meyer Sound MPS IntelligentDC power supply.

Can it be installed in a ceiling plenum? Yes. The MM-10XP is UL 2043 tested and suitable for use in air-handling spaces, unique among the MM-10 family.

What connector does this model use? This version uses an EN3 5-pin male connector that carries both DC power and balanced audio.

How is it mounted? It has top and side nut plates with 3/8-inch or M10 threads and accepts the optional MUB-MM10 U-bracket for wall or ceiling mounting at adjustable angles.

Is this subwoofer covered by a warranty? Yes, it is covered under Meyer Sound's standard product warranty. For details, please contact Creation Networks.