Meyer Sound Ashby-5C-5 5" Active Speaker, with no ATTN (Black) - 09.261.001.02

Product Overview

The Meyer Sound Ashby-5C is a self-powered 5-inch in-ceiling loudspeaker engineered for distributed audio systems that require accurate music reproduction and intelligible speech. Built on Meyer Sound's IntelligentDC platform, it pairs onboard amplification and processing with an exceptionally wide 110° conical coverage pattern. Its compact format and high SPL-to-size ratio allow it to outperform in-ceiling loudspeakers of comparable size. This black-finish model ships without an onboard attenuator (ATTN) for installations where level is managed upstream.

Product Description

The Ashby-5C combines onboard Class-D amplification with sophisticated signal processing to deliver the flat frequency and phase response for which Meyer Sound loudspeakers are known. A 0.75-inch metal-dome tweeter is mounted concentrically over a 5-inch cone driver in a coaxial configuration that maximizes the wave-guide surface for even directivity. Balanced audio and 48 V DC power are delivered over a single composite cable from a Meyer Sound MPS IntelligentDC power supply, permitting longer, lighter-gauge cable runs without conduit under NEC Class 2 wiring. The zinc-plated steel back-can is fire-rated for installation in air-handling plenum spaces, and the low-profile perforated steel grille blends discreetly into finished ceilings. When deeper low-frequency extension and higher SPL are required, the Meyer Sound Ashby-8C offers an 8-inch driver on the same IntelligentDC platform, and the full range is available in the Meyer Sound collection. This unit is the black, no-attenuator configuration.

Key Features

• Self-Powered Design — Onboard Class-D amplification with a total output power of 440 W peak removes the need for external amplifier channels.
• Coaxial Transducer — A 0.75-inch dome tweeter mounted concentrically over a 5-inch cone driver delivers point-source coherence across the listening area.
• Extra-Wide Coverage — A consistent 110° conical pattern lets fewer loudspeakers cover a larger floor area at even level.
• High SPL-to-Size Ratio — Linear peak SPL reaches 112 dB with 19 dB crest factor (M-noise) from a compact 5-inch enclosure.
• IntelligentDC Power and Audio — Balanced audio and 48 V DC power are delivered over a single composite cable from an MPS power supply, supporting long, light-gauge runs.
• Plenum-Rated Enclosure — The zinc-plated steel back-can is fire-rated to UL 2043 for installation in air-handling ceiling spaces.
• Low Distortion — THD, IM, and TIM are specified at less than 0.02% for clean reproduction of speech and music.
• Loop-Through Wiring — A hardwired loop output allows up to three units on one power-supply channel for efficient distributed runs.

Typical Applications

• Huddle rooms, conference rooms, and boardrooms requiring high-quality distributed program and voice
• House of worship spaces and multi-purpose rooms needing wide, even ceiling coverage
• Commercial meeting spaces and training rooms with distributed audio and paging
• Government spaces where intelligible speech is critical

Technical Specifications

Competitor Comparison

Frequently Asked Questions

Does the Ashby-5C require a separate amplifier?
No. The Ashby-5C is self-powered with an onboard Class-D amplifier, but it does require a Meyer Sound MPS-482HP or MPS-488HP IntelligentDC power supply to deliver 48 V DC and balanced audio.

How many Ashby-5C units can one power supply drive?
One MPS-488HP can power up to 24 Ashby-5C loudspeakers (3 per channel), and one MPS-482HP can power up to 6 Ashby-5C loudspeakers.

How does the Ashby-5C compare to the Ashby-8C?
The Ashby-5C uses a 5-inch driver with 110° coverage in a compact enclosure, while the Ashby-8C uses an 8-inch driver with 100° coverage for deeper low end and higher SPL.

Can the Ashby-5C be installed in a plenum ceiling?
Yes. The zinc-plated steel back-can is fire-rated to UL 2043 for installation in air-handling spaces.

Is this product covered by a warranty?
Yes. It is covered under Meyer Sound's standard product warranty. For details, please contact us.