LightWare PSU-48VP2-120 Spare Power Supply

Product Overview

The Lightware PSU-48VP2-120 is a spare 48V DC power supply for Lightware MX2 series matrix switcher boards, delivering 2.5A at 48V DC with universal AC input (100–240V). It is the replacement or redundancy PSU for MX2 frames using 48V IB, OB, P, AP, and SP boards. Available from Creation Networks at creationnetworks.net.

Product Description

When a PSU fails in a Lightware MX2 installation, the entire matrix goes dark. Holding a spare PSU-48VP2-120 on-site compresses that downtime to the time it takes to swap the unit — typically under five minutes for a trained technician. The PSU-48VP2-120 is an IEC-plug unit with universal AC input, so it works globally without modification. It is the correct replacement for any Lightware MX2 frame running 48V remote powering architecture.

This supply is also appropriate as a proactive redundancy component: systems integrators deploying MX2 frames in mission-critical environments — broadcast control rooms, command centers, 24/7 operations facilities — should include a spare PSU in the equipment order to avoid extended lead times during an emergency.

Key Features

• 48V DC output at 2.5A (120W nominal)
• Universal AC input: 100–240V, 50/60 Hz
• IEC connector — globally compatible mains plug
• Designed for Lightware MX2 series: 4TPS2, 4HDMI IB/OB/P/AP/SP boards
• Drop-in replacement — no configuration required
• Compact form factor for rack or enclosed installation

Typical Applications

• On-site spare for Lightware MX2 matrix installations in broadcast and production facilities
• Redundancy PSU for mission-critical AV switching infrastructure
• Replacement unit for field service engineers supporting Lightware MX2 deployments
• New MX2 frame builds requiring a second or backup power supply

Technical Specifications

Competitor Comparison

Frequently Asked Questions

Which Lightware products does this PSU support?

The PSU-48VP2-120 is specified for Lightware MX2 series matrix frames with 48V boards: 4TPS2, 4HDMI IB, OB, P, AP, and SP board variants.

Will this PSU void the Lightware warranty if used as a replacement?

No. This is the Lightware OEM spare part. Using it as a replacement maintains full warranty coverage.

Can I use a generic 48V power supply instead?

Not recommended. The MX2 internal connector and power sequencing requirements are specific to this PSU. A generic supply risks incompatibility, equipment damage, and warranty voidance.

How long does it take to swap this PSU in the field?

For a trained technician, the swap takes under five minutes once the frame is powered down.

Should I order a spare before the existing PSU fails?

For mission-critical installations — broadcast, command centers, 24/7 operations — yes. Holding a spare on-site eliminates procurement lead time during an outage.