Lightware HDMI20-OPTC-RX220-PRO HDMI 2.0 Full 4K Fiber Optical Extender with Gigabit Ethernet - 91550044

Product Overview

The Lightware HDMI20-OPTC-RX220-PRO is the receiver unit of a professional HDMI 2.0 fiber optical extender pair designed for long-distance, uncompressed 4K UHD signal distribution in demanding commercial AV environments. Operating at up to 18 Gbps over a single multimode fiber, this HDMI 2.0 fiber receiver delivers 4096x2160@60Hz 4:4:4 with zero frame delay — a requirement for broadcast studios, live event production, and mission-critical operation centers. The unit is HDCP 2.2 compliant and supports HDR 10, HDR 12, and Dolby Vision within its 18 Gbps bandwidth envelope. Paired with the HDMI20-OPTC-TX220-PRO transmitter, this receiver is a field-proven solution for long-haul 4K HDMI extension up to 700 meters on OM3/OM4 fiber.

Product Description

The HDMI20-OPTC-RX220-PRO accepts the fiber signal from the TX unit and outputs two HDMI 2.0 streams at 18 Gbps and one HDMI 2.0 output at 9 Gbps, giving integrators multi-display flexibility at the receive end. A Neutrik OpticalCON DUO connector provides a ruggedized, field-proven fiber interface suitable for live events and permanent installations alike. Galvanic isolation between source and display eliminates ground loop and hum issues common in large venues. Lightware's Pixel Accurate Reclocking technology removes jitter and skew introduced by source devices or long cable runs, ensuring a stable signal at the display.

Two EtherCON Gigabit Ethernet ports — one for control, one for transparent pass-through — accompany a bidirectional RS-232 port for third-party device control. The unit mounts in a standard 1RU half-rack space with included rack ears that also function as bump guards for rental and touring use. Status LEDs on the front panel indicate power, fiber link, HDCP, signal presence, and output conversion state. Available at Creation Networks for commercial AV integrators and rental/staging companies.

Key Features

• Zero Frame Delay — Signal passes through optical conversion with no added latency, critical for 3D systems and externally synchronized audio workflows.
• 18 Gbps Uncompressed Video — Carries full HDMI 2.0 bandwidth supporting 4096x2160@60Hz 4:4:4 without compression artifacts.
• Up to 700m Extension (OM3/OM4) — Extends full 4K 60Hz signals 700 meters over OM3 or OM4 multimode fiber; up to 2500m at lower resolutions.
• Single Fiber Technology — Video and Gigabit Ethernet ride the same optical strand using 6-channel CWDM, eliminating the need for a second fiber run.
• HDR 10, HDR 12, and Dolby Vision — Full HDR format support within the 18 Gbps bandwidth at 10-bit and 12-bit color depths.
• HDCP 2.2 Compliant — Meets current content protection requirements for professional and broadcast applications.
• Neutrik OpticalCON DUO — Industry-standard ruggedized fiber connector for touring, rental, and permanent install.
• Advanced EDID Management — Factory preset, custom, and transparent EDID modes lock resolution output to match downstream display capabilities.
• Bidirectional RS-232 Pass-Through — Supports 9.6 to 57.6 kBaud for transparent serial control signal transmission over the fiber link.
• Dual Gigabit Ethernet via EtherCON — One control port, one transparent data pass-through; both over fiber using CWDM wavelength multiplexing.
• Pixel Accurate Reclocking — Lightware proprietary technology eliminates jitter and skew from low-quality sources or cascaded device chains.
• 1RU Half-Rack Form Factor — Rack-mountable with included ears; stackable with the TX unit on a single rack shelf.

Typical Applications

• Broadcast studio signal distribution
• Live event and rental/staging 4K workflows
• Government and defense operation centers
• Auditorium and large venue display systems
• Boardroom video wall infrastructure
• House of worship multi-screen installations

Technical Specifications

Competitor Comparison

Frequently Asked Questions

Does the RX220-PRO work without the TX220-PRO?

No. The HDMI20-OPTC-RX220-PRO is the receive unit of the HDMI20-OPTC-TX/RX220-PRO pair. It must be used with the matching TX220-PRO transmitter to function.

What fiber cable type is required?

The unit uses LC duplex connectors and is compatible with OM1 through OM4 multimode fiber. Maximum 4K60 4:4:4 distance of 700m requires OM3 or OM4 fiber.

Can it pass Dolby Vision signals?

Yes. The unit supports Dolby Vision HDR within its 18 Gbps bandwidth at 12-bit color depth, in addition to HDR 10 and HDR 12 formats.

Is the Neutrik OpticalCON DUO connector field-terminable?

Neutrik OpticalCON connectors are available in pre-terminated and field-assembly versions. The specific termination method depends on your cable assembly. Contact Creation Networks for qualified fiber assembly options.

Can RS-232 and Ethernet control be used simultaneously?

Yes. The unit provides independent RS-232 control and two Gigabit Ethernet ports — one dedicated to device control, one for transparent data pass-through — all operating concurrently over the fiber link.

What is the maximum extension distance at 1080p60?

At 1920x1080p60 (148.5 MHz pixel clock), maximum extension is 2500m on OM3 or OM4 fiber, and 1000m on OM2 fiber.

Is the unit compatible with third-party video wall processors?

Yes. Lightware documents compatibility with Corvette, Megapixel HELIOS, and Brompton video wall processors, among others.