Lightware DP-OPT-TX150 Fiber Optical DisplayPort Extender with KVM - 91510018

Product Overview

The Lightware DP-OPT-TX150 is a DisplayPort 1.1a fiber optic extender transmitter that carries high-resolution video, HDCP-protected content, and USB HID signals over a single multimode fiber cable to distances of up to 1100 m. As the source-end unit in the DP-OPT extender pair, it connects to a DisplayPort computer or Thunderbolt-equipped Mac and converts the signal for fiber transmission to the DP-OPT-RX150 receiver at the display end. Integrated HID emulation provides transparent keyboard and mouse extension with no driver installation.

Product Description

The DP-OPT-TX150 connects to the source computer via a standard DisplayPort connector and outputs the signal onto a single SC multimode fiber. Single Fiber Technology allows all high-speed video lanes, HDCP handshaking, DisplayPort Link Training data, and USB HID signals to share a single fiber core bi-directionally — simplifying cabling to one fiber run between source and display.

The transmitter provides 2 local USB-A ports with a built-in USB hub for connection to the host computer via a single USB cable. This allows USB devices at the remote display location to appear as directly connected to the source computer. Dual-mode DisplayPort compatibility allows connection to DVI or HDMI displays at the receiver end via adaptor cable, and the unit is Thunderbolt-compatible for Mac-based installations.

Key Features

• Single fiber transport — DisplayPort, HDCP, Link Training, and USB HID over one SC multimode fiber core
• Max resolution 2560x1600@60Hz — 10.8 Gbps total bandwidth with HDCP 1.1 pass-through
• 4K at 30Hz — supports 4096x2160 and 3840x2160 at 30 Hz
• USB HID local hub — 2x USB-A with built-in hub; connects to PC via single USB cable
• Dual-mode DisplayPort — supports DVI and HDMI displays at the receiver via adaptor
• Thunderbolt compatible — works with Mac computers and Thunderbolt sources
• Apple LED Cinema Display compatible
• Up to 1100 m on OM4 fiber — 150 m OM1, 350 m OM2, 800 m OM3, 1100 m OM4

Typical Applications

• Broadcast control rooms extending operator workstations over fiber to production displays
• Secure facilities with source computers physically separated from display workstations
• Medical imaging with computing equipment in one room and displays in another
• Higher education with source equipment in machine rooms and fiber to classroom displays
• Mac-based creative workstations with long-distance display extension requirements

Technical Specifications

Competitor Comparison

Frequently Asked Questions

Must the TX150 be paired with the RX150?

Yes. The DP-OPT-TX150 is designed exclusively for use with the DP-OPT-RX150 receiver. The Single Fiber Technology is proprietary to the Lightware DP-OPT pair.

How does USB connectivity work from the transmitter side?

The TX150 provides 2 USB-A ports with an integrated hub. A single USB cable connects the hub to the host computer. USB HID devices at the remote receiver end communicate through this link.

Is a Thunderbolt 3 (USB-C) source compatible?

The DP-OPT-TX150 uses a standard DisplayPort connector. Thunderbolt 3 (USB-C) sources require a USB-C to DisplayPort adaptor cable before connecting to the transmitter.

What fiber patch cable connectors are needed?

SC connectors. Ensure fiber patch cables terminated with SC connectors are used at both the TX150 and RX150. SC-to-LC adaptor panels can be used if the existing infrastructure uses LC.

Can the TX150 be remote-configured from the receiver end?

Yes. Both TX and RX units are remotely configurable from either side via the mini USB port and Lightware Device Controller software.

What is the power consumption of the TX150?

2.75 W typical, 3 W maximum without USB; 3.1 W typical with USB; up to 8.2 W maximum with USB devices drawing 500 mA per port.

Where can I purchase the DP-OPT-TX150?

Available from Creation Networks, an authorized Lightware distributor for commercial AV integrators.