LG LSBF018-GDR – LSBF DVLED P1.8 TAA R Mitre Cut Indoor Cabinet 600Nit 1200x675x72

Product Overview

The LG LSBF DVLED P1.8 R Mitre Cut indoor LED cabinet is a commercial direct-view LED cabinet engineered for the right-side corner position in angled video wall installations. The 1.88mm pixel pitch provides clear imagery at viewing distances from approximately 6–9 feet, and the right mitre-cut edge enables a clean angled join when the display transitions around a corner or meets an adjacent display surface. At 1200 x 675 x 72mm with 600-nit brightness, this TAA-compliant cabinet integrates into standard LSBF multi-cabinet arrays for corporate, institutional, and government AV environments.

Product Description

The R mitre-cut edge on this cabinet is precision-machined to form a seamless angular join when the display array changes direction at the right side. This cabinet is used as the right termination panel in corner displays, V-shaped walls, and other configurations where the LED array must meet an adjacent surface at a non-flat angle. Pairing the LSBF018-GDR with an L mitre-cut cabinet on the facing surface creates a clean 90-degree corner join without visible gaps.

The LSBF series design incorporates signal detection status indicators and a diagnostic check button accessible from both the front and rear of the installed cabinet. This dual-access diagnostic capability allows technicians to verify signal and power status during installation and maintenance without requiring access behind the mounting structure. Front serviceability supports LED module replacement from the front face of the display.

The 1.88mm pixel pitch at 600 nits is well-suited to corporate boardrooms, conference rooms, and command center environments where moderate close-range viewing is the primary use case.

Key Features

• 1.88mm Pixel Pitch — Clear indoor imagery at viewing distances from approximately 6 feet.
• R Mitre Cut Edge — Precision right-side angled edge for corner and angled video wall configurations.
• 600-Nit Brightness — Suitable for controlled indoor lighting in corporate and institutional spaces.
• Signal Detection Status Indicator — Integrated in the cabinet frame, accessible from front and rear.
• Dual-Access Check Button — Field diagnostics accessible from both sides of the installed unit.
• Front Serviceability — LED modules replaceable from the front without removing the cabinet.
• Durable Frame Construction — Commercial-grade build for permanent fixed installation.
• TAA Compliant — Meets Trade Agreements Act requirements for eligible procurement.

Typical Applications

• Corporate lobby corner-wrap video walls
• Boardroom and conference room right-side corner panels
• Command center multi-angle display configurations
• Retail and hospitality corner digital signage installations
• House of worship stage corner transitions
• Broadcast studio angled background walls
• Auditorium side-wall panel extensions

Technical Specifications

Frequently Asked Questions

What is the difference between the R Mitre Cut and the standard flat cabinet?

The R mitre-cut cabinet has a precision-angled right edge designed to form a clean join when the display turns a corner. The standard flat cabinet has straight edges on all sides and is used for flat-wall sections of the display array.

Do I need both L and R mitre-cut cabinets for a corner?

For a full 90-degree corner display, you typically need one L mitre-cut cabinet on one wall and one R mitre-cut cabinet on the adjacent wall to form the two sides of the join.

Is this cabinet compatible with flat LSBF P1.8 cabinets?

Yes. All LSBF P1.8 variants share the same cabinet depth and grid dimensions, allowing flat and mitre-cut cabinets to be combined in the same installation.

Does front serviceability support module swap without dismounting?

Yes. Front-access module replacement is supported across the LSBF series, allowing modules to be swapped from the front face without removing the cabinet.

Is the LSBF018-GDR TAA compliant?

Yes, this cabinet is TAA compliant and eligible for government and federally funded AV procurement.

How do I get a system design quote for my installation?

Contact Creation Networks with your installation dimensions and requirements. We provide pre-sales design support including cabinet count, processor selection, and mounting recommendations.