Hosa HMIC-050 50' Pro Series XLRF to XLRM Microphone Cable

Product Overview

The Hosa HMIC-050 is a 50 ft Hosa Pro Series XLR microphone cable for long runs in large venues, touring rigs, and permanent installs. This balanced XLR mic cable pairs a REAN XLR microphone cable connector set with 20 AWG OFC microphone cable conductors to deliver clean balanced audio over substantial distance with strong noise immunity. The 50 ft XLR3F to XLR3M microphone cable is suited to front-of-house runs, distant stage positions, and large-room conference and AV deployments.

Product Description

At 50 ft, the HMIC-050 handles long pulls from a stage or remote mic position back to a snake head, stage box, or rack in auditoriums, houses of worship, and ballrooms. It is terminated with REAN XLR connectors by Neutrik AG, using silver-plated contacts for low-resistance signal transfer. Over a run this long, EMI/RFI rejection is the deciding factor: the balanced topology combined with the 90% OFC braided shield and 20 AWG x 2 OFC conductors holds the signal-to-noise ratio high even when the cable parallels power, dimmer, and data cabling for the full distance. Zinc die-cast housings and chuck-type strain relief give the terminations the durability for repeated cable pulls, coiling, and teardown, making this a professional microphone cable for live sound, recording, and large AV rooms. Compare adjacent lengths: the HMIC-030 (30 ft) and the HMIC-100 (100 ft). Browse the full Hosa collection to spec a consistent cable family across a large venue.

Key Features

• REAN XLR Connectors by Neutrik AG — This Neutrik REAN mic cable terminates in XLR3F and XLR3M connectors for a secure balanced connection on long pulls.
• Silver-Plated Contacts — Silver-plated contacts reduce contact resistance to keep balanced audio clean across the 50 ft length.
• 20 AWG OFC Conductors — Two 20 AWG oxygen-free copper conductors deliver a strong, low-loss signal over the full distance.
• 90% OFC Braided Shield — The dense braided shield provides strong EMI/RFI rejection and protects the signal-to-noise ratio on long parallel runs.
• Zinc Die-Cast Housing — The zinc die-cast connector housing withstands repeated coiling, cable pulls, and teardown in touring and install use.
• Chuck-Type Strain Relief — Chuck-type strain relief clamps the jacket to resist pull-out under the stress of long routed runs.

Technical Specifications