Extron MMK 5/6 Angle Brackets – Angle Brackets for MMK 5 and 6, Black

Product Overview

MMK 5/6 Angle Brackets (Black, pack of 5), part number 70-1371-22. The Extron MMK 5/6 Angle Brackets provide upward display tilt for MMK 5 and MMK 6 mullion mount kits, so a scheduling panel installed at ADA-compliant height reads correctly to someone standing in front of it. They ship in packs of five, which suits floor-by-floor or wing-by-wing deployment rather than one-off ordering. Black and aluminum matte finishes are available to match the mount and door frame. They are an optional accessory, ordered alongside an MMK 5 or MMK 6 rather than in place of one.

Product Description

ADA mounting heights put a scheduling panel lower than natural eye level for most standing adults. On a flat mullion mount, that means looking down at a vertical screen at an unhelpful angle, which is workable but not ideal for legibility, particularly with glare from overhead lighting.

The MMK 5/6 Angle Brackets correct that by tilting the panel upward while keeping it on the mullion at the compliant height. It is a small mechanical change with a real effect on how quickly someone reads room status while walking past.

The brackets are supplied in packs of five, matched to the two MMK finishes so the assembled mount stays visually consistent. They install with the mount rather than requiring later disassembly, so specify them at the same time as the mullion kits if the panels will sit at ADA height.

These brackets are compatible with both the MMK 5 for the Extron TLS 835M and the MMK 6 for the Extron TLS 1035M. They are not a standalone mount and require an MMK 5 or MMK 6 to be useful.

Key Features

• Upward viewing tilt — Angles the panel upward so it reads correctly when mounted at ADA-compliant height.
• Fits both mount sizes — Compatible with the MMK 5 for the TLS 835M and the MMK 6 for the TLS 1035M.
• Pack of five — Supplied in quantities of five for floor-level or wing-level deployments.
• Matched finishes — Available in black and aluminum matte to match the mullion mount and door frame.
• Installs with the mount — Fitted as part of the mount installation rather than requiring later disassembly.

Typical Applications

• Conference room
• Huddle room
• Commercial meeting space
• Multi-purpose room
• Government space

Technical Specifications

Specifications sourced from Extron product documentation.

Frequently Asked Questions

Do these brackets work on their own?

No. They are an accessory for the Extron MMK 5 and MMK 6 mullion mount kits and require one of those mounts to be installed.

How many brackets come in a pack?

Five. Part number 70-1371-22 is black and 70-1371-28 is aluminum matte.

Why would I need angle brackets?

ADA-compliant mounting heights place the panel below natural eye level. Tilting it upward improves legibility and reduces overhead glare for someone standing in front of it.

Can they be added after the mount is installed?

They are designed to be fitted as part of the mount installation. Retrofitting is possible but means partially disassembling the mount, so specify them upfront where panels will sit at ADA height.

Do they change the ADA protrusion compliance?

The MMK mounts are designed as low-profile, ADA-compliant solutions. Adding tilt changes the geometry, so confirm the final assembled projection against your code review for the specific circulation path.

Which finish should I order?

Match the MMK mount finish: black brackets with a black mount, aluminum matte with an aluminum mount, so the assembly reads as one piece.