Extron DTP3 CrossPoint 884 IPCP A Control Processor and Amplifier

Product Overview

The Extron DTP3 CrossPoint 884 IPCP A is a configurable 4K/60 presentation matrix switcher with an integrated IPCP Pro xi control processor and a 200W Class D power amplifier — in addition to the eight dedicated HDMI inputs, eight dedicated scaled outputs, four reversible DTP3 I/O ports, ProDSP with AEC, and Dante networking of the standard 884. The amplifier supports selectable modes: stereo 100W per channel at 4 or 8 ohms, or bridged mono 200W at 8 ohms, 70V, or 100V. Available at Creation Networks.

Product Description

The DTP3 CrossPoint 884 IPCP A adds an integrated control processor and high-power amplifier to the configurable 884 matrix platform, consolidating matrix switching, 4K/60 scaling, Dante audio networking, DSP, amplification, and AV system control into a single 3U rack device for large-scale installations. The configurable DTP3 I/O architecture scales from 8x12 to 12x8 using four reversible ports. All outputs are driven by the Vector 4K scaling engine at 4K/60 with 4:4:4, HDR10, HLG, and Dolby Vision. DTP3 outputs extend uncompressed 4K/60 video, audio, and RS-232 up to 330 feet over shielded CAT 6A cable. ProDSP provides 32/64-bit floating point DSP with four-channel AEC and built-in Dante AES67 networking. The integrated 200W Class D amplifier supports stereo 100W per channel at 4 or 8 ohms, or bridged mono 200W output in 8 ohm, 70V, or 100V modes, covering a broad range of loudspeaker systems. The IPCP Pro xi control processor provides programmable AV system control with an isolated AV LAN switch, multiple serial ports, digital I/O, relays, and IR ports. Available at Creation Networks.

Key Features

• Configurable 8x12 to 12x8 Matrix — Four reversible DTP3 I/O ports configurable as inputs or outputs; matrix size adapts to the installation without hardware changes.
• 4K/60 4:4:4 on All Outputs with HDR Support — Full 4K/60 at 4:4:4 chroma sampling, HDR10, HLG, and Dolby Vision across all outputs via Vector 4K scaling engine.
• DTP3 Extension to 330 Feet over CAT 6A — Uncompressed 4K/60 video, audio, and RS-232 extended up to 330 feet over shielded CAT 6A to DTP3 endpoints and HDBaseT displays.
• Integrated 200W Class D Power Amplifier — Selectable output modes: stereo 100W/channel at 4Ω or 8Ω; bridged mono 200W at 8Ω, 70V, or 100V — covering direct speaker connections and distributed 70V/100V systems from a single unit.
• Integrated IPCP Pro xi Control Processor — Programmable AV system control with isolated AV LAN switch, serial ports, digital I/O, relays, and IR for complete room automation.
• Three-Port Isolated AV LAN Switch — Isolates AV device control traffic from the corporate network while enabling Extron PCS and DSP Configurator management.
• ProDSP 32/64-Bit Floating Point Audio Processor — Four-channel AEC, automixer, EQ, dynamics, delay, feedback suppression, ducking, and Dante AES67 audio networking.
• Dante AES67 Audio Networking — Built-in Dante for integration with broadcast, conferencing, and distributed audio systems.
• HDMI 2.0b with HDCP 2.3 — 18 Gbps data rates, Deep Color, HDR, and full content protection compliance.
• Seamless Switching and Logo Keying — Selectable seamless transitions and graphic overlays on all scaled outputs.
• Extron Everlast Internal Power Supply — Universal power compatibility; 7-year warranty.

Technical Specifications

Typical Application

The DTP3 CrossPoint 884 IPCP A is deployed in large conference centers, command and operations centers, higher education lecture halls, and public venue AV systems where configurable 4K/60 matrix switching, Dante audio, DSP with AEC, high-power amplification in multiple modes, and programmable AV control are needed from a single 3U rack device. Its 200W amplifier with selectable 70V/100V/direct modes makes it particularly suited for facilities requiring both distributed ceiling speakers and direct-drive loudspeakers from one chassis.

Spec Sheet PDF Download

View the Extron DTP3 CrossPoint 884 Product Page for Spec Sheet (PDF)