Extron DTP CrossPoint 84 4K IPCP Q SA 2 x 50 Watt Stereo Amp, AV LAN, LL UI Upgrade, 8x4 Seamless 4K Scaling Presentation Matrix Switcher

Product Overview

The Extron DTP CrossPoint 84 4K IPCP Q SA LL UI Upgrade is an 8x4 4K presentation matrix switcher that combines DTP signal extension, Vector 4K scaling, ProDSP audio processing with AEC, a 2x50W stereo Class D amplifier, and the IPCP Pro 355MQ xi quad-core control processor in a single 2U rack-mount enclosure — with the Extron LinkLicense User Interfaces upgrade pre-activated. The LL UI Upgrade enables a mobile device or standard computer to function as the primary AV control interface, adding BYOD control capability to an already complete single-chassis AV system. Six HDMI and two DTP twisted pair inputs route to two non-scaled HDMI outputs and two independently scaled DTP outputs, with DTP signal extension up to 330 feet over shielded CATx to DTP 230/330 Series endpoints and HDBaseT-enabled displays. Available at Creation Networks.

Product Description

The DTP CrossPoint 84 4K IPCP Q SA LL is specified in commercial AV installations that require a fully integrated single-chassis solution — 4K matrix switching, scaled DTP extension, conferencing DSP, stereo amplification, programmable AV control, and mobile device control interface — without separate rack components. The 8x4 matrix routes any of the six HDMI or two DTP inputs to any of the two HDMI or two scaled DTP outputs independently, with the Vector 4K engine delivering 30-bit precision scaling at 4:4:4 chroma sampling on both DTP outputs. DTP outputs support signal extension up to 330 feet over shielded CATx with bidirectional RS-232 and IR insertion, and can be configured for HDBaseT-compatible display connections. ProDSP provides a 32/64-bit floating point DSP engine with four-channel AEC, eight-group automixer, four mic/line inputs with 48V phantom power, audio breakaway, S/PDIF output, and 32 configurable presets managed in DSP Configurator software. The integrated 2x50W stereo Class D SA amplifier uses Extron CDRS ripple suppression for clean output to low-impedance speaker loads without a separate rack amplifier. The IPCP Pro 355MQ xi quad-core control processor includes 2 GB RAM, 8 GB Flash, a three-port isolated AV LAN switch, three serial ports, four digital I/O, four relays, and two IR ports. The pre-installed LinkLicense User Interfaces upgrade allows any mobile device or laptop on the network to serve as the AV control touchpanel using Extron’s TouchLink interface — per-system licensing with no per-user fees. Available at Creation Networks.

Key Features

• 8x4 4K Matrix Switcher — Routes six HDMI and two DTP twisted pair inputs to two non-scaled HDMI and two independently scaled DTP outputs in a 2U full-rack-width enclosure, replacing up to ten discrete AV components.
• LinkLicense User Interfaces Upgrade — Pre-Installed — Activates mobile device and computer control of the AV system via Extron’s TouchLink interface; licensed per system with no per-user cost, enabling BYOD control in conference and presentation rooms.
• Vector 4K Scaling Engine — Independent per-output 4K scaling on both DTP outputs using 30-bit precision processing and full 4:4:4 chroma sampling; supports output resolutions from 640x480 through 4K (3840x2160 and 4096x2160).
• DTP Twisted Pair Extension to 330 Feet — Two DTP inputs and two DTP outputs extend HDMI, DisplayPort, DVI, or VGA signals up to 330 feet (100 m) over shielded CATx with embedded audio, bidirectional RS-232, IR, and remote power on the same cable.
• HDBaseT-Compatible DTP Outputs — DTP outputs configure for HDBaseT mode to drive compatible displays directly without a dedicated receiver, delivering video, audio, and control up to 330 feet.
• IPCP Pro 355MQ xi Quad-Core Control Processor — Built-in control processor with 2 GB RAM, 8 GB Flash, three-port isolated AV LAN switch, and full complement of control ports for complete room automation without additional hardware.
• Three-Port Isolated AV LAN Switch — Keeps AV device traffic on a dedicated network segment, protecting endpoints from corporate network intrusion while allowing Extron PCS, DSP Configurator, and XTP Configurator access from the LAN.
• ProDSP 32/64-Bit Floating Point Audio Processor — Full-featured DSP with 24-bit/48 kHz conversion, comprehensive tools for level, EQ, dynamics, delay, feedback suppression, ducking, and matrix mixing across all inputs and outputs.
• Four-Channel Acoustic Echo Cancellation (AEC) — Independent AEC per channel with advanced convergence algorithms for clear conferencing audio in double-talk conditions and with wireless microphones in use.
• Eight-Group Automixer — Gated and gain-sharing automix modes with per-channel adjustable gating threshold, level reduction, and timing to eliminate the chop artifact common in traditional gated automixers.
• Four Mic/Line Inputs with 48V Phantom Power — Accepts condenser microphones directly; matrix mixable into any of eight stereo output buses with input gain adjustment from -18 dB to +80 dB in 0.1 dB steps.
• Integrated 2x50W Stereo Class D Amplifier — SA-model amplifier delivers 50W rms per channel into 4 ohms or 25W rms per channel into 8 ohms with Extron CDRS ripple suppression for clean output and reduced RF interference.
• Digital Audio Expansion Port (EXP) — RJ-45 port provides 16x16 I/O channel transport to an Extron DMP 128 Plus processor over shielded CAT 6 (up to 10 m) for scalable audio I/O in larger installations.
• EDID Minder, Key Minder, and SpeedSwitch — EDID Minder ensures reliable source power-up; Key Minder maintains continuous HDCP encryption across all inputs and outputs; SpeedSwitch delivers fast switching for HDCP-protected content.
• Seamless Switching Transitions — Freeze/cut, freeze/fade, cut through black, and fade through black transitions available on scaled DTP outputs for glitch-free source changes in live presentation environments.
• QS-FPC Front Panel Controller — Tri-color backlit discrete input/output buttons for intuitive local operation; front panel security lockout prevents unauthorized switching.

Technical Specifications

Typical Application

The DTP CrossPoint 84 4K IPCP Q SA LL is specified in corporate conference rooms, higher education classrooms, and divisible training spaces where integrators need a single 2U device to handle 4K source switching, DTP signal extension to wall plates and ceiling projectors, conferencing DSP with AEC, direct speaker amplification, and full AV system control — including mobile device control via the pre-installed LinkLicense UI Upgrade. It suits deployments where BYOD control is a requirement and where standardizing on a common room design across a facility is a priority.

Spec Sheet PDF Download

Download the Extron DTP CrossPoint 84 4K Series Spec Sheet (PDF)