Epson ELPCK01 – On-Wall Cable Management Kit

Product Overview

The Epson ELPCK01 On-Wall Cable Management Kit routes projector cabling along the wall surface when running wires inside the wall is not possible or practical. It is designed for ultra short-throw installations and is compatible with the Epson BrightLink 450Wi interactive projector, the 450Wi with RM Easiteach software, the PowerLite 450W multimedia projector, and the PowerLite 460 multimedia projector. The kit's surface-mount tracks give a clean cable run from the wall plate up to a ceiling- or wall-mounted projector.

Product Description

The kit lets an integrator install an ultra short-throw projector in rooms where pulling wires inside the wall is not an option, keeping cabling tidy and protected on the wall surface. Each track is cut to the length needed and attaches directly to the wall, so the run can be tailored to the mounting height and source location. Each track is 2.5" (63.5 mm) wide and stands 3/4" (19 mm) off the wall surface when the cover is in place, giving enough depth to enclose typical projector cabling. Cables are not included, so the installer supplies the HDMI, control, and power runs to suit the job. The kit is matched to the BrightLink 450Wi and PowerLite 450W/460 ultra short-throw projectors. Browse the full Epson projector lineup for a compatible display.

Key Features

• On-wall cable routing — Routes projector cabling along the wall surface where in-wall runs are not possible.
• Cut-to-length tracks — Tracks can be cut to the required length and attached directly to the wall.
• Concealing cover — A cover encloses the cabling for a clean finished appearance.
• Sized for projector cabling — Each track is 2.5" wide and stands 3/4" off the wall when covered.
• UST projector compatibility — Designed for BrightLink 450Wi and PowerLite 450W/460 ultra short-throw projectors.

Technical Specifications

Specifications sourced from Epson's official documentation.