Eaton P005-E10 – 10 ft Heavy-Duty C13 to P-Lock C14 Cord

Product Overview

The Eaton P005-E10 is a heavy-duty C13-to-C14 power cord built for network devices and servers that require a heavier-gauge connection than a standard IEC cord provides. Its 14 AWG conductors and 10 ft. (3.1 m) length make it a practical PDU power cord for reaching between a rack-mounted server and a PDU outlet several rack units away. The locking P-Lock C14 connector helps secure the connection in racks subject to vibration or frequent service access, reducing the risk of an accidental disconnect in a server room or data center rack.

Product Description

This C13-to-C14 power cord is built for network devices that draw enough current to warrant a heavier-gauge cable than a typical 18 AWG cord. Its 14 AWG conductors support high-power connections, making it a reliable choice for large server applications, dense switch stacks, and other rack-mounted equipment with elevated power draw. The 10 ft. (3.1 m) length gives integrators flexibility when a server or piece of networking equipment sits several rack units away from the PDU outlet it feeds. On the C14 end, the P-Lock locking feature secures the plug into the receiving outlet, reducing the chance of an accidental disconnect during rack service, cable routing, or vibration in a data center environment. The C13 end connects to a standard server, switch, or other IEC-320 equipped device power inlet. Rated for 15A at 250V, this cord is suitable for both 120V and 230V PDU feeds. It's a straightforward, dependable replacement or supplemental power cord for any rack that needs a longer, heavier-gauge C13/C14 connection between the PDU and connected IT equipment.

Key Features

• 14 AWG Heavy-Gauge Conductors — Supports higher current draw than standard-gauge power cords, suitable for demanding server and switch loads.
• P-Lock Locking C14 Connector — A locking C14 end helps prevent accidental disconnects during rack maintenance or in high-vibration environments.
• 10 ft. (3.1 m) Length — Reaches between distant rack positions and PDU outlets without needing an additional extension cord.
• 15A, 250V Rating — Rated for use on both 120V and 230V power distribution circuits.
• Standard C13/C14 Connectors — Compatible with the IEC-320 outlets found on most PDUs, UPS units, servers, and switches.

Technical Specifications