Eaton P005-E06 – 6 ft Heavy-Duty C13 to P-Lock C14 Cord

Product Overview

The Eaton P005-E06 is a heavy-duty C13-to-C14 power cord for network devices that need a heavier-gauge connection than a standard-issue cord. Built with 14 AWG conductors and a 6 ft. (1.8 m) length, it's a practical PDU power cord for rack positions close to the outlet, common in server rooms and data center cabinets. The locking P-Lock C14 connector adds a measure of security against accidental disconnects during routine rack service.

Product Description

This C13-to-C14 power cord uses 14 AWG conductors suitable for higher-power connections, making it a reliable option for servers, switches, and other equipment that draw more current than lighter-gauge cords are rated to handle. At 6 ft. (1.8 m), it's sized for shorter runs between a PDU outlet and nearby rack-mounted equipment, helping reduce excess cable length and clutter inside a crowded cabinet. The P-Lock feature on the C14 end locks the plug into the receiving PDU or UPS outlet, reducing the risk of an accidental disconnect during cable management, rack service, or vibration. The C13 end plugs into the IEC-320 inlet found on most servers, switches, and networking equipment. Rated 15A at 250V, this cord works on both 120V and 230V power distribution circuits, making it a versatile addition to a rack's cable inventory for facilities standardizing on heavy-duty locking power cords.

Key Features

• 14 AWG Heavy-Gauge Conductors — Handles higher current draw than standard-gauge cords for demanding server and switch loads.
• P-Lock Locking C14 Connector — Reduces the risk of accidental disconnects during rack maintenance or in vibration-prone environments.
• 6 ft. (1.8 m) Length — Sized for short, clean runs between nearby PDU outlets and rack equipment.
• 15A, 250V Rating — Suitable for both 120V and 230V power distribution circuits.
• Standard C13/C14 Connectors — Compatible with IEC-320 outlets found on most PDUs, UPS units, servers, and switches.

Technical Specifications