Eaton P005-E06-AWH-6 – Heavy-Duty C13 to C14 Cord 6-Pack

Product Overview

The Eaton P005-E06-AWH-6 is a heavy-duty C13 to P-Lock C14 PDU power cord built for network devices and servers that require a heavier-gauge power connection. Rated 15A at 250V with 14 AWG wire, this power cord is designed for reliable, sustained current delivery in data center and server room deployments. Sold as a 6-pack in white, it gives integrators a convenient way to color-code power paths or standardize equipment rollouts across a rack row.

Product Description

Standard 18 AWG power cords are not always adequate for high-power server equipment, which is why the P005-E06-AWH-6 uses a heavier 14 AWG conductor rated for 15A at 250V. This C13-to-C14 power cord is intended for connecting rack-mount servers and networking equipment to a PDU where a higher-rated, heavier-gauge cable is called for. The P-Lock C14 plug secures into compatible PDU outlets, helping technicians avoid accidental disconnects during routine maintenance or cable management in a busy data center rack. Supplied in white and packaged as a 6-pack, the cord set is well suited to large-scale equipment rollouts where technicians need to visually distinguish power feeds, such as separating A-side and B-side power paths in a redundant rack PDU configuration. At 6 ft. (1.8 m), the cord length accommodates typical rack depths while keeping cable management clean inside the cabinet. This power cord is a practical choice for IT facilities managers and integrators standardizing on heavy-gauge power cords across colocation cabinets, server rooms, or network closets, and the multi-pack format streamlines procurement for larger installations.

Key Features

• 14 AWG Heavy-Gauge Wire — supports high-current server and network equipment connections without the derating limits of standard cords.
• 15A, 250V Rating — suitable for demanding rack power loads in enterprise data center and server room applications.
• P-Lock C14 Connector — the locking plug helps keep the cord seated in the PDU outlet during rack servicing.
• C13 Device-Side Connector — compatible with standard C14 equipment inlets found on most rack-mount servers and switches.
• White Color Coding — helps technicians visually distinguish power feeds across a rack or redundant PDU setup.
• 6-Pack Quantity — supplies enough matched cords for a full rack or multi-unit rollout in one purchase.

Typical Applications

• Data center rack PDU connections requiring color-coded power paths
• Colocation facility cabinet builds with redundant A/B power feeds
• Server room equipment rollouts needing matched heavy-gauge cords
• Network closet installations connecting equipment to rack PDUs

Technical Specifications

Frequently Asked Questions

What equipment is this cord compatible with?

It is compatible with any rack-mount server or network device using a standard C14 inlet, connected to a PDU with a C13 outlet.

Why choose white cords over black?

White cords are often used to visually distinguish a secondary or B-side power feed from a primary black-cord feed in redundant rack PDU configurations.

Is the P-Lock connector compatible with all PDU outlets?

The P-Lock C14 plug is designed to work with standard C13 PDU outlets and provides additional retention versus a non-locking cord.

Can this cord be used with three-phase rack PDUs?

Yes, as long as the PDU has a standard C13 outlet and the connected equipment uses a C14 inlet.

What is the warranty on this product?

Eaton backs this unit with its standard manufacturer warranty; contact Creation Networks for the current term and any extended coverage options.

Can Creation Networks help plan cable quantities for a rack build?

Yes, our team can help determine the right cord length, gauge, and quantity for your rack or cabinet power distribution plan.