Dynacord IPX10:8 – 8-Channel 8x1250W Install Power Amplifier
Dynacord IPX10:8 – 8-Channel 8x1250W Install Power Amplifier is backordered and will ship as soon as it is back in stock.
Shipping Availability*
Shipping Availability*
Free Ground Shipping on Most Orders Over $250.00
Looking for the best price or expert advice? Give us a call at 1-888-230-3661 or use the Live Chat below. Buying 1 or 100, you may qualify for greater savings beyond the advertised price.
Dynacord IPX10:8 – 8-Channel 8x1250W Install Power Amplifier
Product Overview
The Dynacord IPX10:8 is an 8-channel, 8 x 1250 W DSP install power amplifier built for high-channel-count networked audio in multi-zone commercial installations. As a rack-mount amplifier with OMNEO IP networking and native Dante connectivity, it lets system designers consolidate eight zones of distributed audio in a single 2U chassis. Variable Load Drive supports low-impedance and 70V/100V/140V direct drive on each channel, making it an efficient 8-channel installation amplifier for mixed loudspeaker systems. It is configured and controlled in IRIS-Net and SONICUE for repeatable commercial deployment.
Product Description
The IPX10:8 delivers eight channels of 1250 W into 4 ohms with a fully integrated 96 kHz DSP engine and FIR Drive technology in a single 2U rack-mount chassis, maximizing channel density per rack unit. Each channel supports Normal, Bridge, Parallel, and Parallel-Bridge modes for low-Z and high-Z distributed audio. Direct Drive provides 70 V, 100 V, and 140 V (200 V in bridge) operation without external transformers, simplifying 70V/100V line design across many zones. OMNEO transports Dante audio with OCA/AES70 control over redundant PRIMARY/SECONDARY EtherCON ports for network resilience. Onboard DSP includes user EQ, speaker EQ, FIR filtering, crossovers, delay, and peak and RMS limiters with thermal modeling per channel, plus a 30-preset speaker pool for fast loudspeaker configuration. Pilot tone supervision and source fallback maintain continuity for paging and announcement systems. Integrators configure and monitor the amplifier in IRIS-Net and SONICUE, with impedance measurement and load monitoring for commissioning and diagnostics. The IPX10:8 is part of the broader Dynacord amplifier collection and works alongside other DSP install amplifiers such as the Dynacord C3600FDi DSP power amplifier.
Key Features
- 8 x 1250 W Multichannel Amplification — Delivers 1250 W per channel across eight channels into 4 ohms for high-density multi-zone distributed audio.
- Variable Load Drive (VLD) — Each channel operates in low-impedance or 70V/100V/140V direct drive, supporting mixed low-Z and high-Z loudspeaker systems without external transformers.
- OMNEO IP Networking with Dante — Transports networked audio over Dante with OCA/AES70 control and redundant PRIMARY/SECONDARY EtherCON ports.
- Integrated 96 kHz DSP and FIR Drive — Native 96 kHz processing provides user EQ, speaker EQ, FIR filtering, crossovers, and delay on all eight channels.
- 30-Preset Speaker Pool — Stored speaker settings speed up configuration of multiple loudspeaker models across zones.
- Per-Channel Limiting and Protection — Peak anticipation and RMS/temperature limiters with thermal modeling protect connected loudspeakers.
- Pilot Tone Supervision and Source Fallback — Monitors analog and OMNEO/Dante inputs and switches to an alternative source for announcement continuity.
- Eco Rail High-Efficiency Topology — Class D output with digitally controlled PFC supply reduces operating cost and rack heat load in dense installations.
Typical Applications
- Houses of worship
- Multi-purpose rooms
- Conference rooms and boardrooms
- Government and commercial meeting spaces
- Training rooms
- Auditoriums
Technical Specifications
| Specification | Value |
|---|---|
| Amplifier Channels | 8 |
| Maximum Output Power (Normal, all channels driven, 4 ohms) | 1250 W |
| Output Power (8 ohms) | 1250 W |
| Bridge Mode (4 ohms / 8 ohms) | 2600 W / 2500 W |
| Parallel-Bridge (4 ohms) | 5000 W |
| Direct Drive (70 V / 100 V, all channels driven) | 1250 W / 1250 W |
| Direct Drive (140 V / 200 V bridge) | 2500 W / 2500 W |
| Max Output Voltage (Normal, per channel) | 150 Vpeak |
| Max Output Current (Normal, per channel) | 41 Apeak |
| Voltage Gain (Low-Z) | 32.0 dB, adjustable 20.0-44.0 dB |
| THD (3 dB below max, AES17, 1 kHz) | < 0.05 % |
| Frequency Response | 20 Hz to 20 kHz (±0.5 dB) |
| Damping Factor (20-200 Hz, 8 ohms) | > 400 |
| Output Stage Topology | Class D, fixed frequency |
| Signal to Noise Ratio (A-weighted, digital input) | 115 dB |
| DSP Sampling Rate | 48 kHz / 96 kHz, OMNEO/Dante synchronized |
| Network Audio Inputs | 8 channels, OMNEO/Dante |
| Network Type | 2 x Neutrik EtherCON/RJ45, redundant PRIMARY/SECONDARY, 1000base-T |
| Analog Audio Input | 4 x 6-pin Euroblock, max +21 dBu, 20 kΩ |
| Speaker Output | 2 x 8-pin Euroblock, 6 mm |
| Mains Input | 1 x Neutrik powerCON-HC |
| Power Requirements | 100 V to 240 V, 50-60 Hz AC |
| Rated Power Consumption | 1300 W |
| Idle Mode | 105 W |
| Standby Mode | < 18 W |
| Cooling | Front-to-rear, temperature controlled fans, supervised |
| Ambient Temperature Limits | +5 °C to +40 °C (+40 °F to +105 °F) |
| Dimensions (W x H x D) | 483 x 88.1 x 514.2 mm |
| Weight | 16.8 kg (37.1 lb) |
| Color | Black |
Specifications sourced from the Dynacord IPX10:8 datasheet. Data subject to change without notice.
Frequently Asked Questions
Does the IPX10:8 support Dante networked audio?
Yes. The IPX10:8 uses OMNEO IP networking, which transports Dante audio with OCA/AES70 control and provides 8 network audio input channels over redundant PRIMARY/SECONDARY EtherCON ports.
How many zones can one IPX10:8 drive?
The amplifier provides eight independent 1250 W channels, allowing a single 2U unit to drive up to eight loudspeaker zones with per-channel DSP and Variable Load Drive.
Can it drive 70V and 100V distributed loudspeaker lines?
Yes. Variable Load Drive provides Direct Drive operation at 70 V, 100 V, and 140 V (200 V in bridge mode) without an external step-up transformer, alongside low-impedance 4-ohm and 8-ohm operation.
What software is used to configure and control the amplifier?
The IPX10:8 is configured and controlled in IRIS-Net and SONICUE, including DSP setup, the 30-preset speaker pool, impedance measurement, and load monitoring.
How much rack space does it require?
The amplifier is a 2U rack-mount chassis measuring 483 x 88.1 x 514.2 mm and weighing 16.8 kg (37.1 lb), with M6 rack-mount screws included.
How does it maintain audio continuity if a source fails?
Pilot tone supervision monitors analog and OMNEO/Dante inputs and automatically switches to an alternative source selection, supporting announcement and paging reliability.
How does the IPX10:8 fit alongside other Dynacord amplifiers?
It complements DSP install amplifiers such as the Dynacord C3600FDi DSP power amplifier. Browse the full Dynacord collection to compare models.
At Creartion Networks, we do everything we can to create an excellent customer experience. This includes fast shipping and easy returns.
- Most in-stock orders placed Monday-Friday ship within 24-48 hours. General restrictions apply; please see our full shipping policy here.
- We offer a 30-day return policy from the delivery date on many products. Product restrictions apply. Restocking fees for the return of open-box items. Please see our full return policy here for more information.
Nationwide Audiovisual Services, Design, Installation & Support
Creation Networks is a trusted nationwide partner for complete audiovisual solutions — delivering expert AV system sales, professional design, programming, installation, and ongoing support to organizations across the United States.
From Microsoft Teams Rooms and enterprise video conferencing to LED video walls, live streaming production, and hybrid collaboration systems, we provide end-to-end AV integration using premium, certified technology from industry leaders including Crestron, Q-SYS, Shure, Extron, and Absen.
Whether you operate a single location or manage facilities nationwide, Creation Networks ensures your AV systems are designed for reliability, scalability, security, and long-term performance — helping your organization communicate more effectively and operate at peak efficiency.
CREATION NETWORKS — A PARTNER YOU CAN TRUST SINCE 2006
