Crown DCI2X300N – 2-Channel 300W Network DriveCore Install Amplifier

Product Overview

The Crown DCI2X300N is a two-channel, 300-watt-per-channel installation amplifier with integrated network control, part of Crown's DriveCore Install N Series. Designed for commercial AV installations requiring remote monitoring and system integration, the DCI2X300N is suited for conference rooms, boardrooms, and commercial meeting spaces where HiQnet-based control is specified as part of a larger Harman AV system architecture. Full 70V and 100V constant-voltage support alongside low-impedance operation covers distributed and direct-drive speaker applications.

Product Description

The DCI2X300N delivers 300 watts per channel into 4 ohms with network-enabled HiQnet control, allowing integration with Harman system control and monitoring platforms for remote amplifier management across multi-room and enterprise AV deployments. Both channels support 70V and 100V constant-voltage output for distributed speaker systems. Onboard DSP provides per-channel limiting, parametric EQ, crossover filtering, and alignment delay. Crown's DriveCore IC integrates driver and output stages, reducing thermal load in enclosed rack installations. The 1U chassis keeps rack space consumption minimal for installations where multiple amplifiers occupy a single rack.

Key Features

• 300W per channel at 4Ω — Reliable output for conference room and commercial zone audio.
• 70V/100V constant-voltage output — Both channels support distributed speaker systems.
• HiQnet network control — Remote monitoring, control, and system integration via Harman AV platforms.
• Crown DriveCore technology — Integrated IC for improved thermal efficiency in permanent rack installations.
• Onboard DSP — Per-channel limiting, EQ, crossover, and delay built in.
• 1U rack-mount chassis — Compact form factor for multi-amplifier rack installations.
• Independent channel operation — Each channel configurable for zone-specific audio settings.
• Comprehensive protection — DC, thermal, and short-circuit protection on both channels.
• Balanced XLR inputs — Professional input connectivity for commercial AV signal paths.
• PureBand Flatness — Consistent frequency response across the full audio bandwidth.

Typical Applications

• Conference room and boardroom audio systems with HiQnet control
• Commercial meeting space and huddle room audio
• Corporate facility zone amplification in Harman AV ecosystems
• Government and institutional facility audio zones
• Training room and classroom audio
• House of worship fill speaker zones on HiQnet networks

Technical Specifications

Frequently Asked Questions

What is the difference between the DCI2X300 and DCI2X300N?

The DCI2X300N adds HiQnet network control capability for remote monitoring and integration with Harman AV system management platforms. The DCI2X300 is the analog-only variant with rear-panel configuration only.

Can the DCI2X300N be controlled from a third-party control system?

The DCI2X300N uses HiQnet protocol. Integration with third-party control systems such as Crestron or AMX typically requires a HiQnet-compatible gateway or driver. Consult your control system vendor for compatibility.

Does the DCI2X300N require an external DSP processor?

Not for standard installations. Onboard DSP handles per-channel limiting, EQ, crossover, and delay.

What is the warranty?

Crown professional installation amplifiers carry a 3-year limited warranty. Contact Creation Networks for service information.