Crestron HZ2-BTNS-6-W ENGRAVED – Horizon 2 Button Set Style 6, White, Custom Engraved

Product Overview

The Crestron HZ2-BTNS-6-W ENGRAVED is a field-replaceable Horizon 2 button assembly in the Style 6 configuration — a single large rocker — in white plastic finish with custom laser-etched engraving. Style 6 is the same button layout used on HZ2-AUX multiway remotes, providing a large, intuitive rocker for simple on/off, raise/lower, or scene-toggle operation. Engraving is applied by Crestron before shipping.

Product Description

The Style 6 single large rocker is ideal for locations where simplicity is the priority: room entries, secondary control points, bedside controls, and any position where a single toggle-style function covers the primary need. The white plastic finish is the most commonly specified color in commercial and residential installations, blending with standard white hardware throughout the space. Custom engraving on the rocker face identifies the zone — such as “Overhead,” “Entry,” or a room name — for a polished, professional appearance. This assembly is field-replaceable and is compatible with all Horizon 2 in-wall devices including the HZ2-AUX multiway remote.

Key Features

• Style 6: (1) single large rocker button
• White plastic finish
• Custom laser-etched engraving applied by Crestron
• Engraving files required at order time
• Field-replaceable without removing device from wall
• Compatible with all Horizon 2 in-wall devices including HZ2-AUX

Typical Applications

• Simple on/off or raise/lower control at room entry points and secondary positions
• HZ2-AUX multiway remote button replacement in white-finish installations
• White-finish Horizon 2 deployments requiring custom-labeled rocker buttons

Technical Specifications

• Button Style: Style 6 — (1) single large rocker
• Finish: White plastic
• Engraving: Custom laser-etched, by Crestron; files required at order
• Field Replaceable: Yes
• Compatible Devices: All Horizon 2 in-wall series including HZ2-AUX
• Note: Button assembly only; device and faceplate sold separately

FAQs

Is this compatible with the HZ2-AUX multiway remote?

Yes. Style 6 is the default button configuration on HZ2-AUX devices and this assembly is fully compatible as a replacement or finish upgrade.

Can the engraving be changed after installation?

No. Engraving is permanent and is applied at Crestron before shipping. Engraving files must be finalized at order time.

Where can I purchase this?

Available from Creation Networks at creationnetworks.net.