Crestron CLW-BTN-RKR-A-S_ENGRAVED – Rocker Engravable Button Cap for Cameo In-Wall Dimmers and Switches, Almond Smooth, Custom Engraved

Product Overview

The Crestron CLW-BTN-RKR-A-S_ENGRAVED is a rocker-style engravable button cap for Crestron Cameo in-wall dimmers and switches, finished in Almond Smooth with custom engraving included. The rocker format is designed for CLW in-wall devices that use a traditional rocker switch layout, where a single elongated button is pressed at the top or bottom to raise/lower dimming or toggle the load. Custom engraving is applied at the factory based on the integrator’s specification.

Product Description

Rocker button caps for CLW in-wall devices span the full width of the device face and feature independent top and bottom press zones, each of which can carry a separate engraved label. This is useful for devices that control dimming (top = brighten, bottom = dim) or switching (top = on, bottom = off) with clearly labeled control directions. The CLW-BTN-RKR-A-S_ENGRAVED provides a rocker cap in Almond Smooth finish, which coordinates with almond-toned wall hardware in traditional and transitional residential environments. Factory engraving is applied per the integrator’s text specification, ensuring consistency and quality across multi-room installations. The smooth finish provides a clean surface that maximizes engraving visibility on both the top and bottom press zones.

Key Features

• Rocker-style button cap for CLW series Crestron in-wall dimmers and switches
• Almond Smooth finish for warm-tone traditional installations
• Custom engraving included—factory-applied, with separate top/bottom labeling capability
• Full-width rocker design for intuitive raise/lower or on/off control
• Coordinates with Almond Smooth Cameo faceplates and wall hardware
• Direct replacement or new-install cap for CLW rocker-style devices

Typical Applications

• CLW rocker dimmer or switch devices in Almond Smooth finish installations
• Traditional residential rooms with raise/lower or on/off control labeling
• Multi-room projects requiring consistent factory engraving on CLW rocker caps
• Replacement caps for CLW rocker devices in existing Almond Smooth installations

Technical Specifications

• Model: CLW-BTN-RKR-A-S_ENGRAVED
• Compatible Devices: Crestron CLW series in-wall dimmers and switches (rocker format)
• Button Style: Rocker
• Finish: Almond Smooth
• Engraving: Custom engraving included (top and/or bottom zones)

Frequently Asked Questions

Q: Can both the top and bottom zones of the rocker cap be engraved with different text?
A: Yes. The rocker cap has separate top and bottom press zones, each of which can carry independent engraving. Specify the text for each zone when ordering through your Crestron dealer.

Q: Is a blank Almond Smooth rocker cap available?
A: Yes. The CLW-BTN-RKR-A-S_BLANK provides the same rocker cap without engraving.

Q: Are rocker caps and large button caps interchangeable on CLW devices?
A: No. Rocker caps and large button caps are designed for different CLW device models with different button footprints. Verify which button format your specific CLW device requires before ordering.