Barco UDX Multifunctional Frame motorization upgrade - R9801755

Product Overview

The Barco UDX Multifunctional Frame Motorization Upgrade (R9801755) adds motorized projector positioning to the Barco UDX and UDM Multifunctional Frame. It allows the projector to be physically moved within the frame without a technician climbing a ladder to the projector position with tools. The kit upgrades V2 and V3 frames and suits high-rigging rental and installation environments. It streamlines setup, alignment and strike on demanding production schedules.

Product Description

This upgrade kit converts a manual UDX Multifunctional Frame into a motorized assembly, so the projector can be repositioned remotely once the frame is flown. As shown in the product image, the kit installs into the existing frame mechanics to drive projector movement. The result is faster, safer alignment for projectors mounted high on truss, where ladder access is impractical or time-consuming. The upgrade is designed for the Barco UDX and UDM platforms, covering UDX-4K22, UDX-4K26, UDX-4K32, UDX-4K40, UDX-U32, UDX-U40, UDX-U45LC, UDX-W22, UDX-W26, UDX-W32 and UDX-W40 models, plus the UDM line. The motorization kit requires the fiber TX/RX Module kit (R9004752) and an MTP to OpticalCon MTP24 converter to operate. Combine it with the rest of the Barco projection range for a complete motorized rigging package.

Key Features

• Motorized positioning — Drives projector movement within the Multifunctional Frame so the unit can be repositioned remotely.
• No-ladder alignment — Removes the need to climb to a flown projector with tools, improving speed and safety.
• V2 and V3 frame upgrade — Installs into existing UDX Multifunctional Frame V2 and V3 mechanics.
• UDX and UDM compatibility — Works across the Barco UDX and UDM projector families.
• Rental and install focus — Built for high-rigging staging and fixed-install setups where access is limited.
• Fiber control ready — Operates with the fiber TX/RX Module kit (R9004752) and MTP to OpticalCon MTP24 converter.
• Faster turnaround — Speeds projector setup, alignment and strike across show dates.

Typical Applications

• Large-venue rental — Remotely aligning flown UDX and UDM projectors over event stages.
• Touring — Reducing setup time when projectors are rigged high on truss across multiple dates.
• Fixed installation — Permanent installs where ongoing projector access for alignment is difficult.

Technical Specifications

Frequently Asked Questions

What does this motorization upgrade do? It adds motorized movement to the UDX Multifunctional Frame so the projector can be repositioned without climbing to it with tools.

Which frames does R9801755 upgrade? It is designed for UDX Multifunctional Frame V2 and V3 assemblies.

Which projectors are supported? The Barco UDX series and UDM series, including the UDX-4K, UDX-U and UDX-W variants.

Are additional parts required to operate it? Yes. The kit requires the fiber TX/RX Module kit R9004752 and an MTP to OpticalCon MTP24 converter.