Cisco Room Navigator CS-T10-TS-LX- – Table Stand Touch Panel, First Light

Product Overview

CS-T10-TS-LX- is a distributor-listed ordering code for the First Light table-stand Cisco Room Navigator, the 10.1-inch panel that controls a paired Cisco video endpoint from the meeting table. Cisco documents First Light and Carbon Black as the Room Navigator's two finishes but publishes no key for the LX position in this part number, so treat the finish as the distributor states it and validate the exact configuration against your Cisco quote before ordering. Functionally this is the current table-stand Room Navigator: 1920 x 1200 capacitive touch, PoE 802.3af Class 0 over one Ethernet run, and support across Room Series, Board Series and Desk Series. It is the panel to specify when a site wants one control surface for a mixed Cisco estate.

Product Description

Estates that grew by room rather than by project usually end up with several generations of endpoint. The Room Navigator is useful there because Cisco lists a single compatibility set — Room Series, Board Series including Board S, Board Pro and Board Pro G2, and Desk Series — against RoomOS 9.14.3 or later. One panel SKU, one spare, one training session for the facilities team.

Physically the table version measures 2.8 x 9.53 x 6.42 in. (7.1 x 24.2 x 16.3 cm) and weighs 1.39 lb (0.63 kg), so it sits inside the normal cable-well footprint on a conference table. The interface rotates 180 degrees when the device is tilted, which matters when the panel is placed centrally and reached from both sides of the table.

Power and data arrive on one Ethernet (RJ-45) 100 Mbps connection using PoE 802.3af Class 0. Where the room uses a Cisco Board Pro or Board Pro G2, the endpoint's own 15.4 W 802.3af port can carry the panel, so the table drop terminates at the codec rather than at a switch. Review comparable control surfaces in the device and room control collection, and the endpoints they pair with in video conference systems.

Where part-number ambiguity affects a procurement record, it is worth resolving before the purchase order goes out rather than after delivery. Creation Networks can confirm the shipping configuration for this ordering code alongside the rest of the Cisco range.

Key Features

• 10.1-inch 1920 x 1200 capacitive touch panel — The higher resolution than the Touch 10's 1280 x 800 keeps room-booking and call-control layouts legible at arm's length.
• Wide Cisco device compatibility — Cisco lists support across Room Series, Board Series (Board S, Board Pro, Board Pro G2) and Desk Series, so one control-panel SKU covers a mixed estate.
• 180-degree UI rotation on the table version — The interface rotates when the device is tilted, so a panel placed mid-table stays readable from either side.
• PoE 802.3af Class 0 power — A single Cat cable carries both power and data, so the panel needs no local mains outlet at the table or beside the door.
• Built-in environmental sensors — Temperature, humidity and TVOC air-quality readings are reported to Cisco Control Hub alongside acoustic data from the paired endpoint, giving facilities teams workspace telemetry without extra sensors.
• Anti-glare, anti-fingerprint surface — The finish reduces visible smudging and reflections on a panel that is touched constantly in a bright room.
• First Light and Carbon Black finishes — Cisco documents two colour options for the Room Navigator, letting the panel be matched to the room finish or the paired device.
• RoomOS 9.14.3 minimum software — Cisco publishes a clear software floor, so an integrator can confirm the paired endpoint is current before the panel is commissioned.

Technical Specifications